REPAIR TO CERTAIN WOODEN FURNITURE INCLUDING POLISHING AT BABINA CANTT UNDER GE BABINA

Amount

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Make-Greenpanelmax/Century. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Bottom rail : M & L bottom rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Short stiffener : M & L short stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings. Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel.

Table 3’ X 2’ with / without drawer (FD- 41,42,231,224,234, 283 & 284) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table 3'x2' with/without drawer by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair dining with long back (FD-357) :- Seat & Back : M&L for removing of old/torn foam cushion seat & back of existing Chair dining long back cushioned and providing/fixing new seat and back made of 50mm thick foam of 32 density foam cushion duly covered with leatherite upholstery (as approved) and fitted to the chair complete all as per drg and as directed by Engr-in-Charge.

Chair dining with long back (FD-357) : Rear Leg : M&L for taking out old broken unserviceable rear leg of chair dining long back and and supply & fixing new rear leg of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Side rails : M&L for taking out old broken unserviceable side rail of chair dining long back and and supply & fixing new side rail of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed side rail to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Rear rails : M&L for taking out old broken unserviceable rear rail of chair dining long back and and supply & fixing new rear rail of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed rear rail to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Front rails : M&L for taking out old broken unserviceable front rail of chair dining long back and and supply & fixing new front rail of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly front rail to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Side stiffeners : M&L for taking out old broken unserviceable side stiffener of chair dining long back and and supply & fixing new Side stiffener of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed side stiffener to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Centre stiffeners : M&L for taking out old broken unserviceable centre stiffener of chair dining long back and and supply & fixing new centre stiffener of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed centre stiffener to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) : Back rest battens : M&L for taking out old broken unserviceable back rest batten of chair dining long back and and supply & fixing new back rest batten of suitable size, made of Ist class hard wood including preparation of surfaces and applying high gloss french polish on newly fixed back rest battem to match the colour with existing chair complete all as per drg and as directed.

Chair dining with long back (FD-357) :Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Chair dining with long back by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge complete all as per drg and as directed.

Table writing (FD- 33,249,275) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table writing (FD- 33,249,275) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD- 33,249,275) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table writing (FD- 33,249,275) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table writing (FD- 33,249,275) :- Stiffener : M & L Stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table writing (FD- 33,249,275) :- Bottom rail : M & L bottom rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table writing (FD- 33,249,275) :- Shutters complete with knob and lock : M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Table writing (FD- 33,249,275) :- Sides of cup board : M&L for removing of unserviceable sides and supply & fix new side one side teak veneer faced prelaminated particle board 18mm thick confirming to IS all as directed by Engr-in-Charge.

Table writing (FD- 33,249,275) :- Bottom of cup board : M&L for removing of unserviceable bottom and supply & fix new bottom of prelaminated particle board 18mm thick confirming to IS all as directed by Engr-in-charge.

Table writing (FD- 33,249,275) :- Back of cup board : M & L for back of cupboard made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg.

Table writing (FD- 33,249,275) :- Partition of the cup board : M&L for removing of unserviceable partition of cup board and supply & fix new partition of cub board one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table writing (FD- 33,249,275) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings. Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table writing (FD- 33,249,275) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table writing (FD- 33,249,275) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table writing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) :- Top long rail : M & L Top long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) :- Top short rail : M & L Top short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) :- Stiffener : M & L stiffner made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) :- Short Stiffener : M & L short stiffner made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291) :- Wooden cleat : Wooden cleat made out out well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-Charge.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel.

Table 3’ X 3’ (900 x 900 x 760 mm) (FD- 88,291 ) : Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table 3'x3' by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table Office Officer (WDF- 32/FD- 139) :- Top: M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Office Officer (WDF- 32/FD- 139) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings. Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table Office Officer (WDF- 32/FD- 139) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Officer (WDF- 32/FD- 139) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Officer (WDF- 32/FD- 139) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Officer (WDF- 32/FD- 139) :- Shutter complete with knob and lock : M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Table Office Officer (WDF- 32/FD- 139) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table office officer by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table dining 6/8 pers (FD -30,273,376) :- Top for table dining 6 pers : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table dining 6/8 pers (FD -30,273,376) :- Top for table dining 8 pers : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table dining 6/8 pers (FD- 30,273,376) :- Long rail of table dining 6 pers : M & L long rail of Table dining 6 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/8 pers (FD- 30,273,376) :- Long rail of table dining 8 pers : M & L long rail of Table dining 8 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/8 pers (FD- 30,273,376) :- Short rail for 6/8 pers : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/8 pers (FD- 30,273,376) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/8 pers (FD- 30,273,376) :- Wooden cleat : M & L for wooden cleat made out of well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-Charge.

Table dining 6/8 pers (FD- 30,273,376) :- PVC Shoes : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table dining 6/8 pers (FD- 30,273,376) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dining 6/8 pers by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Teapoy (FD- 232/382/34(M)/278) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Teapoy (FD- 232/382/34(M)/278) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Teapoy (FD- 232/382/34(M)/278) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Teapoy (FD- 232/382/34(M)/278) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Teapoy (FD- 232/382/34(M)/278) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Teapoy (FD- 232/382/34(M)/278) :- PVC Shoes : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Teapoy (FD- 232/382/34(M)/278) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Teapoy by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Make- Greenpanelmax/Century. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Back : M & L Plywood 6mm thick one side teak face shall be provided to the back of table bed side as shown on drg and as directed by Engr-in-Charge.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Side : M&L for removing of unserviceable side and supply & fix new side one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Shelf : M&L for removing of unserviceable shelf and supply & fix new shelf one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table bed side by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table centre (FD-29/235/274/384) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table centre (FD-29/235/274/384) :- Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table centre (FD-29/235/274/384) : Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table centre (FD-29/235/274/384) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table centre (FD-29/235/274/384) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table centre (FD-29/235/274/384) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Table centre by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair dining (FD- 16/203/ 279/228) :- Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD- 16/203/ 279/228) :- Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Chair dining (FD-16/203/ 279/228) : Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD- 16/203/ 279/228) :- Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD- 16/203/ 279/228) :- Side rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD- 16/203/ 279/228) :- Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD- 16/203/ 279/228) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining (FD-16/203/ 279/228) :- PVC Shoes : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair dining (FD- 16/203/ 279/228) :- Caning : Removing of unserviceable/ worn out plastic cane from Chair dining and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-in-Charge.

Chair dining (FD- 16/203/ 279/228) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-Charge.

Table Dressing Gents (FD-31,230,379) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings. Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table Dressing Gents (FD-31,230,379) :- Mirror : S & F in repairs new mirror 5mm thick of approved make with full frame all as specified on drawing or as directed by Engineer-in-Charge.

Table Dressing Gents (FD-31,230,379) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Irrespective of what is shown on drg and as directed by Engr-in-charge.

Table Dressing Gents (FD-31,230,379) :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-charge.

Table Dressing Gents (FD-31,230,379) :- Sides : M&L for removing of unserviceable sides and supply & fix new sides one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table Dressing Gents (FD-31,230,379) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing gents by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table Dressing Ladies (FD- 32,251,265,378) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Dressing Ladies (FD- 32,251,265,378) :- Glass shutter : S&F in repairs new Glass shutters including Aluminium channel of Table dressing ladies all as specified on drawing or as directed by Engineer-in-charge (Each glass shutter shall be measured as single unit).

Table Dressing Ladies (FD- 32,251,265,378) :- Back : M & L Plywood commercial 6mm thick BWR grade ISI mark shall be provided to the back of table dressing ladies as shown on drg and as directed by Engr-in-Charge.

Table Dressing Ladies (FD- 32,251,265,378) :- Mirror : S&F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engineer-in-Charge.

Table Dressing Ladies (FD- 32,251,265,378) :- Bottom : S & F first bottom for Table dressing ladies as shown on drg or as directed by Engr-in-Charge.

Table Dressing Ladies (FD- 32,251,265,378) :- Leg : S & F first class teak wood leg to the bottom for Table dressing ladies as shown on drg or as directed by Engr-in-Charge.

Table Dressing Ladies (FD- 32,251,265,378) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing ladies by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Peg Table (FD-25(M) /277/236/266/384) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Peg Table (FD-25(M) /277/236/266/384) :- Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Peg Table (FD-25(M) /277/236/266/384) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Peg Table (FD-25(M) /277/236/266/384) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Peg Table (FD-25(M) /277/236/266/384) :- PVC Shoes : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Peg Table (FD-25(M) /277/236/266/384) : Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Peg Table by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Hat stand with mirror (FD- 23, 361) :- Looking mirror : M&L Looking mirror size 440 x 300 x 5 mm of approved quality duly fixed with beading size 35x6mm made out of well seasoned duly finished as shown on drg.

Hat stand with mirror (FD- 23, 361) :- Brass peg : M&L Brass peg 100mm long as per sample shall be fixed with brass screws 25mm long as shown on drg.

Hat stand with mirror (FD- 23, 361) :- Rawl plug : M &L rawl plug as per drg and approved sample shall be fixed to the back of the hat stand as shown on the drg.

Hat stand with mirror (FD- 23, 361) :- Beading : M & L for Beading made out of well seasoned teak wood size 35x6mm allaround shall be provided to the frame of hat stand as shown on drg.

Hat stand with mirror (FD- 23, 361) :- Plywood : M & L for Plywood one side teak face 4mm thick confirming to IS duly approved shall be provided wherever required to be fixed with head less nails all as shown on drg and as directed by Engr-in-Charge.

Hat stand with mirror (FD 23, 361) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of Hat stand with mirror by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair wooden bottom (FD- 225, 285) :- Seat : M & L Seat to be made of ply wood commercial 9mm thick, BWR grade ISI marked with 6mm dia perforation and to be fixed with 20mm long screw wood steel.

Chair wooden bottom (FD- 225, 285) :- Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Side rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair wooden bottom (FD- 225, 285) :- PVC Shoes : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel.

Chair wooden bottom (FD- 225, 285) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of chair wooden bottom by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table Office Clerk (DB- 4121/292) :- Top: M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Make- Greenpanelmax/Century. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Office Clerk (DB- 4121/292) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table Office Clerk (DB- 4121/292) :- Leg : M & L Leg l made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Clerk (DB- 4121/292) :- Long rail : M & L long rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Clerk (DB- 4121/292) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Clerk (DB- 4121/292) :- Long Stiffener : M & L long stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Clerk (DB- 4121/292) :- Short Stiffener : M & L short stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table Office Clerk (DB- 4121/292) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table office clerk by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair Easy (FD- 17,229,201) :- Front Leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Side rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Arm Rest : M & L arm rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Back frame rail for back : M & L back frame rail for back made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- Fillets for caning seat and back : M & L fillets for caning seat & back made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair Easy (FD- 17,229,201) :- PVC Shoes : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair Easy (FD- 17,229,201) :- Caning : Removing of unserviceable/ worn out plastic cane from Chair Easy and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-in-Charge.

Chair Easy (FD- 17,229,201) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of chair Easy by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Side rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- PVC Shoes : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Stiffener : S & F stiffener 25mm x 25mm beneath to the seat made out of seasoned teak wood free from cracks and knot and other blemishes irrespective of drg and as directed.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Seat : Removing of unserviceable/ worn out plastic seat from Chair dining and material and labour for repacement of new seat plasic of size 405x390mm & preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary as directed by Engr-in-Charge.

Chair dining JCOs/ORS (FD/E6/MAP-II/05) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-Charge.

Chair writing (FD- 20/202/250/280) :- Front Leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Rear leg : M & L rear leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Side/back rail : M & L side/back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- Arm Rest : M & L arm rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair writing (FD- 20/202/250/280) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Chair writing (FD- 20/202/250/280) :- Caning : Removing of unserviceable/ worn out plastic cane from Chair writing and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-in-Charge.

Chair writing (FD- 20/202/250/280) :- Polishing :Material and labour for preparation of old existing polished surfaces, new replaced parts of chair writing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Side Board (FD- 26/241) :- TOP : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Make- Greenpanelmax/Century and as shown on drawings and as directed by Engr-in-Charge.

Side Board (FD- 26/241) :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Side Board (FD- 26/241) :- Sides : M&L for removing of unserviceable sides and supply & fix new sides one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Side Board (FD- 26/241) :- Door shutters with knob to be fixed with Piano type continuous hinges : M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Side Board (FD- 26/241) :- Drawers with Knob : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.Brass knob size 40mm dia as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Side Board (FD- 26/241) :- Knob : M&L for removing of unserviceable knob and supply & fix new fancy knob as per sample kept in furniture yard and as directed by Engr-in-Charge.

Side Board (FD- 26/241) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of side board by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table bed side (FD/E6/MAP/15(R)) :- Top : M&L for removing of unserviceable top and supply & fix new top of one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table bed side (FD/E6/MAP/15(R)) :- Side : M&L for removing of unserviceable side and supply & fix new side of one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table bed side (FD/E6/MAP/15(R)) :- bottom : M&L for removing of unserviceable bottom and supply & fix new bottom of one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Drawer : M&L for removing of unserviceable drawer and supply & fix new drawer one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings. CP handle of size 100mm as approved shall be provided to the drawer irrespective of what is shown on drg and as directed by Engr-in-Charge.

Table Bed Side FD/DB(FD-28(M)/276/248/210) :- Shutters complete with CP handle and lock : M&L for removing of unserviceable shutter complete with CP handle 100mm lonf and supply & fix new shutter complete one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable CP handle of size 100mm as approved with lock shall be provided.

Table bed side (FD/E6/MAP/15(R)) :- Lock of shutter : M&L for removing of unserviceable lock of the shutter and supply & fix new suitable lock ISI marked with duplicate keys to the shutter as directed by Engr-in-charge.

Stool dressing CB (FD- 27/252/282) :- Leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Stool dressing (FD- 27/252/282) :- Front Rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Stool dressing CB (FD- 27/252/282) :- Side Rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Stool dressing (FD- 27/252/282) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Stool dressing CB (FD- 27/252/282) :- PVC Shoes : Hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Stool dressing (FD- 27/252/282) :- Caning : Removing of unserviceable/ worn out plastic cane from stool dressing and material and labour for preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary and recaning the same with new white plastic cane of 2mm wide and 0.4 mm thick half round oval shape and beading all round with 3mm wide and 0.4mm thick as directed by Engr-in-Charge.

Stool dressing (FD- 27/252/282) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of stool dressing by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-Charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16)) :- Looking Mirror with frame to be fixed with Piano type continuous hinges : M & L Looking mirror Size 1080mm x530mm x 5mm thick of approved make with full frame and duly fixed with piano type hinges with beading size 35x6mm made out of well seasoned duly finished as shown on drg & all as specified on drawing or as directed by Engineer-in-Charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16) :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side teak veneer faced prelaminated particle board 18mm thick confirming to IS All as specified, directed and shown on drawings..Irrespective of what is shown on drg and as directed by Engr-in-Charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16) :- Sides : M&L for removing of unserviceable sides and supply & fix new sides one side teak veneer faced prelaminated particle board 18mm thick confirming to IS & all as specified, directed and shown on drawings irrespective of what is shown on drg and as directed by Engr-in-Charge.

Dressing Mirror Gents Offrs/JCOs/OR (FD/E6/MAP/16)) :- Glass shelf : S & F in repairs new glass shelf of 5mm thick of size 496mmx95mmx5mm thick of approved make and to be fixed in inner side of dressing mirror gents all as specified on drawing or as directed by Engr-in-Charge.

Table dressing ladies with stool cushioned (FD/MAP-II/07) :- Mirror : S&F in repairs new mirror 5 mm thick for Table dressing ladies of approved make with complete frame back all as specified on drawing or as directed by Engr-in-Charge.

Table dressing ladies with stool cushioned (FD/MAP-II/07) : Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dressing ladies by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Chair dining Officers (FD/E6/MAP-II/04) :- Front leg : M & L front leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Rear leg : M & L rear leg rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Front rail : M & L front rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Back rail : M & L back rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Side rail : M & L side rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Back Rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- Stiffener : M & L stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair dining Officers (FD/E6/MAP-II/04) :- PVC Shoes : M & L hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel.

Chair dining Officers (FD/E6/MAP-II/04) :- Seat : Removing of unserviceable/ worn out seat from Chair dining and material and labour for repacement of seat Plywood with foam and tapesrty cloth and supply and fixing new foam 75 mm thick 32 HD covered with best quality tapestry cloth (not less than 350/- RM) including bottom plywood 9mm thick commercial BWR Gde and to be fixed with screws to the chair as directed by Engr-in-Charge, size of seat 460mmx 375mm .Shape and size all as existing or as per directed by Engr-in-Charge & preparation of surface filling the cracks lightening the frame by proveding the fevicol putting wooden nails where as necessary as directed by Engr-in-Charge.

Chair dining Officers (FD/E6/MAP-II/04) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of chair dining by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-Charge.

Trestle SR wooden (FD- 86/141) :- Top batten size 2440x100x100mm : M & L seasoned 2nd class hard wood 'SAL' duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-Charge.

Trestle SR wooden (FD- 86/141) :- Top batten Size 600x60x100mm : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-Charge.

Trestle SR wooden (FD- 86/141) :- Top batten Size 2040x60x100mm : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-Charge.

Trestle SR wooden (FD- 86/141) :- Legs : M & L seasoned 2nd class hard wood 'SAL'duly finished free from cracks and knots shall be used of size as per drg and as directed by Engr-in-Charge.

Trestle SR wooden (FD- 86/141) :- Finish : M & L treating the surfaces of trestle store room wooden shall be treated with two coats of creosote oil after preparartion of surface and as directed by Engr-in-Charge.

Almirah mess utensil (DB-25A & FD-93(M) :- TOP : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated particle board 18mm thick confirming to IS in Baverian beach shade and as shown on drawings and as directed by Engr-in-Charge.

Almirah mess utensil (DB-25A & FD-93(M) : :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom of 18mm thick BWR grade plywood commercial Make- Greenply/Century/Kitply and as shown on drawings and as directed by Engr-in-Charge.

Almirah mess utensil (DB-25A & FD-93(M) :- Sides : M&L for removing of unserviceable sides and supply & fix new sides one side melamine faced pre laminated particle board 18mm thick confirming to IS in Baverian beach shade and as shown on drawings and as directed by Engr-in-Charge.

Almirah mess utensil (DB-25A & FD-93(M) :- Door shutters with knob to be fixed with Piano type continuous hinges : M&L for removing of unserviceable shutter complete with knob and supply & fix new shutter complete one side teak veneer faced prelaminated particle board 18mm thick confirming to IS.Teak wood beading 6mm thick shall be provided all around duly fixed with piano type hinges and suitable brass knob 40mm dia as approved with lock shall be provided.

Almirah mess utensil (DB-25A & FD-93(M) :- Hasp & Stapple : Supply and fixing in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter as shown on drg.

Almirah mess utensil (DB-25A & FD-93(M) :- Knob : M&L for removing of unserviceable Knob and supply & fix new Knob as per sample kept in furniture yard and as directed by Engr-in-Charge.

Almirah mess utensil (DB-25A & FD-93(M) :- leg : M & L leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Almirah mess utensil (DB-25A & FD-93(M) :- Shelf : M&L for removing of unserviceable shelf and supply & fix new shelf made of 18mm thick plywood commercial. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Almirah mess utensil (DB-25A & FD-93(M) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of side board by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) :- Top : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) :- Long rail : M & L long rail of Table dining 6 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) :- Short rail : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) : Stiffener : M & L Stiffener made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table 1520 x 860 x 760mm (wooden) : (FD-139(M) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table 5'x2'-10'' by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

Table dining 6/4 pers (FD/MAP-II/03) : Top for table dining 6 pers : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table dining 6/4 pers (FD/MAP-II/03) : Top for table dining 4 pers : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table dining 6/4 pers (FD/MAP-II/03) :- Long rail of table dining 6 pers : M & L long rail of Table dining 6 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/4 pers (FD/MAP-II/03) :- Long rail of table dining 4 pers : M & L long rail of Table dining 4 Pers made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed .

Table dining 6/4 pers (FD/MAP-II/03) :- Short rail for 6/4 pers : M & L short rail made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/4 pers (FD/MAP-II/03) :- Leg : M & L Leg made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Table dining 6/4 pers (FD/MAP-II/03) :- Wooden cleat : M & L for wooden cleat made out of well seasoned teak wood free from cracks and knots and sap wood at each corner of the table of required size shall be fixed with 50mm long screw wood steel ISI marked all as directed by Engr-in-Charge.

Table dining 6/4 pers (FD/MAP-II/03) :- PVC Shoes : M & L for hard PVC shoes of approved quality shall be fixed to the bottom of the legs with 30mm long screw wood steel ISI marked.

Table dining 6/4 pers (FD/MAP-II/03) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of table dining 6/4 pers by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-Charge.

TV trolley (FD/E6/MAP/04(R)) : Removing of existing old u/s wheel coster and S&F new wheel coster of TV Trolly size and shape to mach the original complete all as per drg and as directed.

TV trolley (FD/E6/MAP/04(R)) : Removing of existing old unsv side and S&F new side made of 18mm thick prelaminated particle board of TV trolley complete all as per drg and as directed.

TV trolley (FD/E6/MAP/04(R)) : Removing of existing old unsv top and S&F new top made of 18mm thick prelaminated particle board of TV trolley complete all as per drg and as directed.

TV trolley (FD/E6/MAP/04(R)) : Removing of existing old unsv back and S&F new back made of 18mm thick prelaminated particle board of TV trolley complete all as per drg and as directed.

TV trolley (FD/E6/MAP/04(R)) : Removing of existing old u/s 5.5mm th openable glass shutter with magnetic catoer and S&F new 5.5mm th openable glass shutter with magnetic catoer of TV Trolly size and shape to mach the original complete all as per drg and as directed.

Book case open large wooden (FD-45(M)) :Shutter with knob : Removing of existing old u/s shutter and S&F new Shutter one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Book case open large wooden (FD-45(M):- TOP : M&L for removing of unserviceable top and supply & fix new top one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Book case open large wooden (FD-45(M)) :- Shelf : M&L for removing of unserviceable shelf and supply & fix new shelf one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Book case open large wooden (FD-45(M)) :- Bottom : M&L for removing of unserviceable bottom and supply & fix new bottom one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Book case open large wooden (FD-45(M)) :- Sides : M&L for removing of unserviceable sides and supply & fix new sides one side teak veneer faced prelaminated particle board 18mm thick confirming to IS and as shown on drawings and as directed by Engr-in-Charge.

Book case open large wooden (FD-45(M)) :- Polishing : Material and labour for preparation of old existing polished surfaces, new replaced parts of side board by scrapping and rubbing down by emery paper including filling the cracks and pores with paste and putty and polishing with French polish as per IS code upto glossy finish to the entire satisfaction of Engr-in-charge.

M/s Indu Enterprises

ROHIT ENTERPRISES

M/S Shri Balaji Enterprises