REPAIR TO DOORS, WINDOWS, VENTILATOR CUPBOARDS AND CONNECT JOINERY WORK AND POST CONSTRUCTION ANTI TERMITE TREATMENT WORK IN DOMESTIC AREA AT AF STN NAL

Amount

Taking down frames with shutters n exc 1.50 Sqm each with shutter without taking off shutters from the frame, complete all as specified and as directed.

Taking down frames with shutters exc 1.50 Sqm and n.exe 4 sqm each with shutter without taking off shutters from the frame, complete all as specified and as directed.

Taking down shutters exc 1 sqm and n exc 2 sqm each of any description, complete all as specified and as directed.

Taking down shutters exc 1 sq. M and n exc 2 sq. M each of any description including resecuring , easing ,adjusting and refixing in same or different opening of similar nature, complete all as specified and as directed.

S & F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing,lungs,hinges,lock strike plate, etc with one shop coat of primer complete all as specified and directed.

S & F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing,lungs,hinges,lock strike plate, etc with one shop coat of primer complete all as specified and directed.

S&F Solid PVC door frame of size 50 mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing and making the surface good as specified and directed

S&F Factory made coloured solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed

S&F 35mm thick 2nd class hardwood plain, framed, panelled shutters (any No. of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of fitted to chowkats complete all as specified and directed.

Supply and fixing 30 mm thick flush shutters, solid core construction, with block board core, both face is covered with 0.9mm thick decorative laminated surface finish, colour or pattern as approved, fixed with approved adhesive as per manufacturer's instructions with lipping/frame to match complete all as specified and as directed.

M&L Factory Made 35mm thick 2nd class hard wood glazed & gauged skeleton shutters open rebated and prepared to received glass/gauge etc ( without sash bars) edges of framing plains chamfered or rounded fitted with cut and mitered bead for securing glass etc .all as specified. Note : - Wire mesh and glazing shall be measured and paid separately in respected items .

M & L for Cement concrete PCC Type C0 1:3:6 using (12.5 mm crushed stone aggregate) as in filling in hollow pressed steel frames complete all as specified & directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ,complete all as specified and directed.

S&F 100 mm long butt hinges type B-22 extruded aluminium alloy with galvanised mild steel hinge pine complete all as specified and directed.

S&F in aluminium handles 150 mm,cast type ,anodised complete all as specified and directed.

Supply and fixing 60x 40 mm door stopper hanging type, consisting two leg aluminium anodised natural shade matt finish aluminium rod with rubber shoe complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 300 MM long aluminium anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheets cast of excruded section and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F factory made box type steel window 1.25mm thick ERW hollow P section of each frame size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauzed glazed & Skelton shutter ERW section 50mmx20mm & 1mm thick with two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1.25mm thick with following fittings welded to the frame shutter :- i) Hold fast 150mm long mild steel flat iron 12x3 mm made to shape- 04 Nos per window. ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf. v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 Nos per leaf vi) MS pintal hinges 12 x 75 mm - 2 Nos each leaf vii) 10 mm squre guard bar @ 10 cm c/c viii) 25 x 3 mm flat iron for joint of both frame wiremesh & Glazed welded inner side and outer side of frame (ix) 0.36 mm nominal dia of stainless steel wire mesh and average width of aperture 1.40 mm fixed in glazed/gazed skelton shutter of window (x) 3mm thick sheet glass ordinary quality and with oil putty in squre n exc 0.50 sqm in each pane fixed in glazed /guage skelton shutter of window (xi) Two coat of synthetic enamel paint over a coat of primer. xii) Fabrication and fixing arrangements as per specification including taking down, cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Note: (i) Windows shall be provided as per the TD i.e typical details of Box window (Steel) with fly proof shutter. (ii) The mode of measurement shall be only one for the set of two i.e wire mesh window and glass window at one location and nothing extra shall be measured on this account.

All as per item no 21 but mild steel box type ventilator .

Dismantling boarding, any description any size , fixed in any position with screws complete all as specified .

Supplying and Fixing in repair for providing cupboard shutter in required size at site made out of 18 mm thk PVC colour sheet and provision of shutters one side decorative pre laminated PVC sheet and all required brackets SS screws piano hinges etc. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thk edge bonding tape or 90 degree edge bent finish as approved by Engr-in-charge.

S&F 18 mm thick Celuka Ply of density 600kg/cum of plain colour Sheet for kitchen cabinets sides, top, bottoms and shelves inside the cabinet. Make: Rajshree Plastiwood/ Sintex/ Greenply/ Centuryply/ HR Enterprises

S&F 18 mm thick Celuka Ply of density 600kg/cum one side prelam/Rigidlam (Colour/Shade as approved) and other side plain white colour to make kitchen cabinet shutters / drawer , complete all as specified and directed.

S&F Auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters complete all as specified and directed. Note : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion.

Supply and fixing Stainless Steel (SS 304) handles 100 mm size for Kitchen Cabinet Shutters, complete all as specified and directed.

Supply and fix in repair Auto closes clip on cabinet hinges (regular) for kitchen cabinet shutters , complete all as specified and directed. Note : Each pair means one piece fixed on openable shutter and other piece fixed on fixed portion.

Supply and fix in repair Ball bearing drawer channel telescopic type (500mm) Full Extention Load of load bearing capacity 45 Kg , complete all as specified and directed. Note : Each pair means 2 nos of telescopic channel, one piece fixed on left side and another piece fixed on right side.

M & L for Prepepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of primer (red oxide primer) , complete all as specified and as directed.

M&L for preparation of new wooden surfaces of girth exc 10 cm and applying two coats of synthetic enamel paints over and including a coat of pink primer , complete all as specified and as directed.

M & L for Providing and injecting emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 concentrate along the external wall of building below concrete or masonry apron or on internal wall along and above the skirting using chemical emulsion @ 2.25 litre per linear metre including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement 2 Coarse sand) in apron complete all as specified and as directed. Note :- Engg-in-charge should check the gurantee period of ATT work of the building.

M & L for Providing and injecting chemical emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 of soil under existing floors using chemical emulsion @ 1 Ltre per hole 300mm apart including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement & 2 Coarse sand) to match the existing floor and making good the disturbed sufaces to match with the existing surface complete all as specified. Note :- Engg-in-charge should check the gurantee period of ATT work of the building.

M&L for Providing and injecting chemical emulsion at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and making good the surface by applying the matching distemper/whitewash complete all as directed and specified. Note :- Engg-in-charge should check the gurantee period of ATT work of the building.

SHREE GURU NANAK CONSTRUCTION COMPANY

Beenu Co. Company

m/s gaurav enterprises