Providing Renovation works for existing 13 Nos. of PC quarters to Convert into Police Guest House at KANYAKUMARI in Kanyakumari District

Amount

23.3) Supplying and fixing of Magnetic door catches

25) Supplying and fixing of MS hold fast

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

47) Supplying and fixing of Alu. Towel rail of 75 cm long

48) Supplying and fixing of Aluminium plate with 5 pins Coat stand

52.1) Supplying and fixing of G.I. Pipe 20mm dia for hot water line (Fully concealed in walls)

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

87) Supplying and fixing of ELCB Single phase

238) Anticorrosive treatment for steel reinforcement rods

Annexure 8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

c. In Second Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

b. In First Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture b. In Ground Floor

c. In First Floor

14.2.1) Precast Cupboard slab 40mm tk in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick b. In Ground Floor

c. In First Floor

15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor

b. In First Floor

18.1) Formwork using M.S.Sheet b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

21.5.5) Supply and fixing of UPVC window frames having 2 track for 2 shutter

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

22.9) Solid core TW flush door with Teak ply on both sides and TW lipping alround Single leaf shutter Suitable for door of size a) 900 x 2100mm

22.9.3) Supplying and fixing of Solid core flush door shutters with Teak ply on both sides and TW lipping alround single leaf shutter Suitable for door of size a) 1000 x 2400mm

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.4) Pointing the pressed tiles with C.M. 1:3 mixed with WPC using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.1) Painting the new walls with Two coat of Oil Bound Distemper over the primer coat of white cement

38.4.3) Painting the old walls with two coats of Oil Bound Distemper over existing wall surfaces including thorough scrapping with water wash

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)

44.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)

51.3) Supplying and fixing of PVC water tank

52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia

b. 25 mm dia

52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., c. 20mm dia

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

57.2.1) Supplying and fixing of wall mounted EWC

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming lS: 694:1990 for Fan point (Open wiring)

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (Open wiring)

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself (Open wiring)

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring)

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.6.1) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.7.1) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

87.2) Supplying and fixing of 20 Amps DP plug and socket in sheet enclosure with 32A DP MCB in Flush with wall with earth connection

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

103) Supplying and fixing of water tight Bulk Head fitting with guard suitable for 12 watts LED bulb

104) Supplying and fixing of 12 watts LED bulb for bulk head fittings

110) Supplying and fixing of MCB 240V/415V 50 HZ Single Pole 6A to 32A, 10KA

112.1) Supplying and fixing of Exhaust Fan 225mm dia

144) Supplying and fixing of CP Shower Arm with Overhead Shower Rose

238.1) Anticorrosive treatment for steel window / MS grills

272) Providing two legged scaffolding using 13 to 15 cm dia casurina post with country wood planks (Silver Oak) 40mm thick a) 5.5m height in addition to 2.5m height

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

379.6.1) Supplying and fixing of Granite tile of size 2'x1', 10mm tk (Jet Black) for Kitchen hearth slab in cm 1:3, 12mm tk using crushed stone sand a. In Ground Floor

b. In First Floor

383.2) Providing double nosing to the edges of granite slab

796) Painting two coats of plastic emulsion paint for new plastered surfaces

796.1) Painting two coats emulsion paint for old surfaces with thorough scrapping with water wash

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.3) Clean removal of cement plaster from the existing wall surfaces

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Under 3.00m height

800.5.1) Dismantling clearing away and carefully stacking materials useful for reuse of Mosaic-in-situ finish in cement mortar in flooring and in wall surface

800.9) Dismantling, clearing away and carefully stacking materials useful for reuse for Doors and Windows including removal of frames, hinges and fastenings

M J ENGINEERING CONSTRUCTION