Execution of UG cable work under RDSS Scheme for Laying of 33 KV 3 400 sq mm UG cable for Agri feeder separation works at Veerapanur feeder for the period of One Year from the date of commencement of work in South Madukkarai Section

Amount

Earth work excavation in all kinds of soils within an initial of 10m and lift of 2m in trenches (Narrow pits) less than 1m width including all labour charges, lead, lift etc complete

Cutting open the Blacktopped road surface including the cost for providing signal boards, lights,watch and ward to regulate the traffic, taking all precautions to protect the men, materials and the public fromo any possible accidents etc.,using JCB/Air compressor (or) drilling machines etc., wherever necessary (at anytime throughout the day) including taking all precautions to prevent any damages to the Telecom and Water lines.

Providing crusher dust instead of sand with good quality to a depth upto 150mm (6") including cost of materials, labour, leads and lifts etc., complete.

Refilling with excavated earth consolidating in layers and the top brought for line with the existing surface including cost of labour, lead, lift etc., complete.

Laying of 33 KV RCC V troughs and laying over the UG cable to proper grade and alignment inside the cable trench painting letters of not less than 75mm an either side of ;the troughs as directed by the Engineer incharge of works including the cost of all materials ,upto 30kms stenciling painting brushed all leads and lifts etc complete

Uncoiling and laying of 33 KV HT cable 3x 400 Sq.mm in the excavated trench including drawing the cable trough RCC/GL/PVC pipes wherever necessary at road crossing etc without any damage including transporting of cables, tools and plants labour lead, lift etc complete

Cutting the cable of required length and sealing the ends with suitable end caps for 33 KV XLPE cables, including cost of all materials, Tools and Plants,leads and lifts etc., complete (Locally enquired rate)

Transporting of the remains of the empty cable drums (iron materials) to the stores for devolution including loading and unloading, leads and lifts, etc., complete.

Supply and erection of cable marker in RCC (1:2:4) using 20mmHBS metal of size 0.3m x 0.60m and of 100mm thick, engarving letters "TNEB UG CABLE" Painting the engraved letters, fixing the Cable Marker in a bed of PCC (1:3:6) using 20mm HBS Metal of size 0.45m x 0.30m x 0.45m including cost of all materials, labour, Transporting to the destination, all leads and lifts etc., complete.

Providing watch and ward required at site as directed by the Engineer incharge

Providing barry cade arrangements while execution of work including labour charges etc complete.

Labour charges for erection of 33 KV 3 x 400 sqmm outdoor / Indoor Termination kit

Labour charges for erection of 33 KV 3x400 sqmm straight joint kit

Labour charges for UG Cable earthing using GI pipe

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

C.PERIYASAMY