Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
28 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
DEN IV
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre- defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil work other than track work.
7 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer may please note that offers received without requisite/mandatory documents as mentioned above, will be considered as invalid tender and for which contractor shall have no claim on Railway.
The tenderer shall visit the site of work and acquaint himself/themselves with the conditions of work viz. approach roads and accessibility, availability of materials, electric power, water for work and drinking purposes, site for labour camps, stores, godowns, extent of lead/lift in work, availability of skilled and unskilled labour etc. that may be encountered in the course of execution of work. In short, he/they should familiarize himself/themselves fully with the all the conditions of the work site & all the financial implications due to the above conditions is deemed to be understood and taken care of while bidding the offer.
Repair to Leaky Roofs of Relay Rooms and Battery Rooms and Wornout Roof Treatment, Damaged sunsheds, inside and outside plaster, rainwater pipes etc. to avoid roof leakage of station buildings and miscellaneous repair works of service buildings in the section of ADEN/ROK.
33-2026-27-WIV~NR
33-2026-27-WIV
Open
Works - General
6 Months
Delhi, Delhi
₹0
₹3.0 L
3 Sept 2026
3 Sept 2026
14 Sept 2026
79 items across 3 schedules · ₹1,69,02,816.09 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 100 | 286.85 | 28,685 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 100 | 253.95 | 25,395 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 335 | 368.65 | 1,23,497.75 |
| 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 25 | 6,326.05 | 1,58,151.25 |
| 5 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 9,375.2 | 4,68,760 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 157 | 307.95 | 48,348.15 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 400 | 766.55 | 3,06,620 |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 400 | 608.35 | 2,43,340 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 450 | 804.25 | 3,61,912.5 |
| 10 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 10 | 9,673.5 | 96,735 |
| 11 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 14400 | 89.65 | 12,90,960 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 46 | 8,683.8 | 3,99,454.8 |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 97.5 | 10,306.2 | 10,04,854.5 |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 110 | 6,658.25 | 7,32,407.5 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 150 | 8,288.35 | 12,43,252.5 |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 450 | 1,063.45 | 4,78,552.5 |
| 17 | 12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS : 848 : | Sqm | 40 | 2,682.05 | 1,07,282 |
| 18 | Kiln seasoned and chemically treated hollock wood | Sqm | 30 | 3,140.15 | 94,204.5 |
| 19 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 450 | 194.35 | 87,457.5 |
| 20 | 100x63x4 mm | Each | 350 | 97.6 | 34,160 |
| 21 | 75x63x4 mm | Each | 190 | 79.05 | 15,019.5 |
| 22 | 250x16 mm | Each | 66 | 234.9 | 15,503.4 |
| 23 | 250x10 mm | Each | 125 | 104.4 | 13,050 |
| 24 | 150x10 mm | Each | 290 | 75.55 | 21,909.5 |
| 25 | 125 mm | Each | 222 | 60.05 | 13,331.1 |
| 26 | Single rubber stopper | Each | 60 | 35.5 | 2,130 |
| 27 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 45 | 3,496.75 | 1,57,353.75 |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 850 | 111.95 | 95,157.5 |
| 29 | Hot finished welded type tubes | Kg | 2000 | 154.9 | 3,09,800 |
| 30 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. | Each | 55 | 185.2 | 10,186 |
| 31 | M.S. tube | Kg | 500 | 157.15 | 78,575 |
| 32 | Stainless steel (grade 304) wire gauge of 0.5 mm dia wire and 1.4 mm aperture on both sides | Sqm | 80 | 971.55 | 77,724 |
| 33 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 300 | 935.6 | 2,80,680 |
| 34 | Size of Tile 600x600 mm | Sqm | 500 | 1,416.65 | 7,08,325 |
| 35 | With machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation 12.5, conforming to IS 2690 | Sqm | 1000 | 905.8 | 9,05,800 |
| 36 | In 75x75 mm deep chase | Metre | 400 | 260.2 | 1,04,080 |
| 37 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. | Each | 40 | 266.6 | 10,664 |
| 38 | 110 mm diameter | Metre | 240 | 319.75 | 76,740 |
| 39 | 1:6 (1 cement: 6 fine sand) | Sqm | 5500 | 282 | 15,51,000 |
| 40 | Two or more coats on new work | Sqm | 4000 | 92.75 | 3,71,000 |
| 41 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 2000 | 97.6 | 1,95,200 |
| 42 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 4000 | 158.95 | 6,35,800 |
| 43 | Two or more coats on new work | Sqm | 970 | 131.45 | 1,27,506.5 |
| 44 | Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 500 | 1,250.75 | 6,25,375 |
| 45 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 14 | 5,781.35 | 80,938.9 |
| 46 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 14 | 5,540.55 | 77,567.7 |
| 47 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 14 | 1,404 | 19,656 |
| 48 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 14 | 1,500.05 | 21,000.7 |
| 49 | 510x1040 mm bowl depth 250 mm | Each | 13 | 6,008.45 | 78,109.85 |
| 50 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 4 | 6,119.15 | 24,476.6 |
| 51 | 65 mm nominal dia Pipes | Metre | 250 | 1,576.9 | 3,94,225 |
| 52 | 15 mm dia nominal bore | Metre | 195.3 | 485.2 | 94,759.56 |
| 53 | 20 mm dia nominal bore | Metre | 648 | 315.35 | 2,04,346.8 |
| 54 | 50 mm dia nominal bore | Metre | 500 | 654.2 | 3,27,100 |
| 55 | 15 mm nominal bore | Each | 22 | 303.85 | 6,684.7 |
| 56 | 15 mm nominal bore | Each | 42 | 348.85 | 14,651.7 |
| 57 | 20 mm nominal bore | Each | 42 | 397.45 | 16,692.9 |
| 58 | 15 mm nominal bore | Each | 73 | 85.2 | 6,219.6 |
| 59 | 100 mm diameter | Each | 9 | 166.35 | 1,497.15 |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 7500 | 9.7 | 72,750 |
| 61 | 300 mm dia. R.C.C. pipe | Metre | 325 | 902.05 | 2,93,166.25 |
| 62 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 450 | 433.95 | 1,95,277.5 |
| 63 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 531.8 | 1,06,360 |
| 64 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 50 | 1,019.8 | 50,990 |
| 65 | 300 mm dia | Metre | 300 | 690.7 | 2,07,210 |
| 66 | 100 mm nominal size dia | Metre | 300 | 553.2 | 1,65,960 |
| 67 | 100 mm nominal size dia | Metre | 300 | 579.95 | 1,73,985 |
| 68 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in- charge. | cum | 20 | 1,479.25 | 29,585 |
| 69 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in- charge. | Hour | 100 | 916.8 | 91,680 |
| 70 | 100 mm dia | Each | 5 | 189.65 | 948.25 |
| 71 | 100 mm clamp | Each | 30 | 1,522.5 | 45,675 |
| 72 | 100 mm dia | Each | 5 | 228.25 | 1,141.25 |
| Schedule total | ₹1,65,38,596.11 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS 12 GCC 2022
ATTACHMENT
Specialinstructionstothetenderer.pdf
ATTACHMENT
StandardTenderDocument2022R5.pdf
ATTACHMENT
GCC-2022withCSupto11.pdf
ATTACHMENT
GCCACS-123389822Dated12.08.2026_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .