Tender ID

DEFPROC

Active

Works

Civil Works

ADDN/ALTN AND SPECIAL REPAIRS TO ROOF AND CONNECTED WORKS IN BLDG NO T-25 UNDER GE HADDO, SRI VIJAYA PURAM

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE Haddo Sri Vijaya Puram | South Andamans, Andaman And Nicobar Islands

Amount: ₹43.6 LCloses: 23 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published3 Nov 2026
Submission Opens17 Nov 2026
Closes23 Nov 2026
Bid Opening25 Nov 2026

Tender Value

₹43.6 L

EMD Value

₹87,200

Closing Date

23 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

GE Haddo Sri Vijaya Puram

Address

GARRISON ENGINEER HADDO MILITARY ENGINEER SERVICES HADDO SRI VIJAYA PURAM 744102

Work Description

ADDN/ALTN AND SPECIAL REPAIRS TO ROOF AND CONNECTED WORKS IN BLDG NO T-25 UNDER GE HADDO, SRI VIJAYA PURAM

Tender Information

Tender ID

2026_MES_797000_1

Reference Number

8418/E8

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE Haddo Sri Vijaya Puram

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Class D and Category a(i)

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Application on letter pad (.pdf)

RequiredScanned copy of DD or Bankers Cheque in favour of GE Haddo payable at Sri Vijaya Puram (.pdf)

RequiredScanned copy of Enlistment letter in MES with details of Class and Category (.pdf)

RequiredScanned copies of EPF code Number and GST registration (.pdf)

RequiredScanned copy of EMD if applicable (.pdf)

RequiredScanned copy of documents required for unenlisted contractor as per NIT (.pdf)

RequiredScanned copy of residual work in hand on letter head as per NIT (.pdf)

RequiredScanned copy of affidavit on non judicial stamp paper stating that no Govt dues/recovery is outstand (.pdf)

Finance

RequiredBOQ Schedule of Works (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE Haddo

EMD Fee Amount

₹87,200

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

3 Nov 2026

Published

3 Nov 2026

Bid Opening

25 Nov 2026

Download Starts

3 Nov 2026

Download Ends

23 Nov 2026

Submission Starts

17 Nov 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (44 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed	400	Sqm	-	-
2	Providing and fixing stone-coated steel roofing tiles/sheets, manufactured from 0.50 mm base metal thickness (BMT) steel sheet with aluminium-zinc alloy metallic coating of AZ150 grade, finished with corrosion-resistant acrylic/polymer binder and natural coloured stone granules, in approved profile, colour and shade, including matching ridge covers, hip covers, verge trims, flashing pieces and other necessary roofing accessories; cutting, overlapping, wastage, self-drilling corrosion-resistant screws with EPDM sealing washers, compatible sealants and all necessary fixing accessories, laid and secured over the existing or separately measured approved steel/wooden purlin framework at the spacing recommended by the manufacturer, complete in all respects as per the manufacturer's specifications and as directed by the Engineer-in-Charge. Make: DECRA / Metrotile / other make specifically approved by the Accepting Officer, subject to compliance with the specified technical requirements and submission of manufacturer's technical data and test certificates.	600	Sqm	-	-
3	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed	98	Qtl	-	-
4	S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed	6,500	Kg	-	-
5	S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge	2,800	Kg	-	-
6	S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified	500	Kg	-	-
7	M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed	210	Sqm	-	-
8	Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.	96	Per Point	-	-
9	Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.	2	Each	-	-
10	Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.	120	RM	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

BOQ_893977.xls

BOQ • 0.44 MB

8418Tender.pdf

Tender Documents • 1.10 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

400

Sqm

Providing and fixing stone-coated steel roofing tiles/sheets, manufactured from 0.50 mm base metal thickness (BMT) steel sheet with aluminium-zinc alloy metallic coating of AZ150 grade, finished with corrosion-resistant acrylic/polymer binder and natural coloured stone granules, in approved profile, colour and shade, including matching ridge covers, hip covers, verge trims, flashing pieces and other necessary roofing accessories; cutting, overlapping, wastage, self-drilling corrosion-resistant screws with EPDM sealing washers, compatible sealants and all necessary fixing accessories, laid and secured over the existing or separately measured approved steel/wooden purlin framework at the spacing recommended by the manufacturer, complete in all respects as per the manufacturer's specifications and as directed by the Engineer-in-Charge. Make: DECRA / Metrotile / other make specifically approved by the Accepting Officer, subject to compliance with the specified technical requirements and submission of manufacturer's technical data and test certificates.

600

Sqm

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Qtl

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed

6,500

S & F Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge

2,800

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified

500

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

210

Sqm

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc.

Per Point

Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Each

Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

120