Repairing of Fire-tender of model Tata 1613 (BS-IV) bearing registration no. OD-35C-8720 i.e, Body, Mechanical and Auto electrical works using appropriate and suitable spares at Lingaraj OCP, Lingaraj Area

Amount

BODY AND SUSPENSION WORK

Front door lock assly

Rear door lock assly

Outer door handle

Door hinges (Fr & Rr)

Door drop (Rear)

Rear upper side pipe stand

Front glass rubber beeding with lock rubber

Glass nali

M.S. Square pipe (dia-1 1/2")

M.S. Angle (30X5) & (60X5)

G.I. Plate (18 gauge)

M.S. Plate (18 gauge)

M.S. Flat (40mm X 1mm)

13 No Nut and Bolt with Washer

24 No Nut and Bolt with Washer (2")

M.S. Channel (75X75X40mm)

New glass machine assly

1" Aluminium flat

Aluminium rivets

Aluminium angle bit

Aluminium tep bit

Chassis 'U' Bolt and Nut

Water tank pipe geutice

Front centre bolt and nut

Front auxiliary 'A' spring leaf

Front auxiliary 'B' spring leaf

Front spring pin and bush

Front 'U' bolt and nut

Rear centre bolt and nut

Rear auxiliary 'A' spring leaf

Rear auxiliary 'B' spring leaf

Rear spring pin and bush

Rear spring 'U' bolt and nut

Rear spring hanger assly

Quarter bolt and nut (F&R)

Drum, gaddi and patti washer (F&R)

Spring clamp with nut and bolt (F&R)

New aluminium plate (8'x4') 18 gauge

Front Glass Assembly

New Clutch Plate assembly

Pressure Plate Assembly

Fly-wheel plate assembly

Fly-wheel ring assembly

Pilot Bearing

Propeller Shaft yoke and teeth assembly

Cross Holder assembly

Universal Joint Cross Assembly

Shaft Bolt and Nut

Auto Electrical Works

Self Starter Bandex Pinion Assly

Self Starter Carbon Brush

Self StarterBush

Self StarterField Coil Assly

Self StarterSolenoid Switch Assly

Electrical Circuit unit Assembly

Labour Charges

Leaf spring set opening, high making / tensioning and fitting

Spring leaf cutting, hole making with hanger cutting and welding

Water tank opening / dismantling, repairiing, welding and geutice changing and fitting

Cabin denting, welding and repairing work including structure and glass frame reapiring and structure new making

All doors opening / dismantling, repairing, welding and fitting with above new meniotned items

Front glass opening and refitting

Opening and dismantling of Rear load body and then making / repairing, welding of new structure of the vehicle etc. as required

Complete seat opening, making of new one/sticthing and fitting with needful rexin, foam etc as required

Complete vehicle scrapping and spray painting with suitable automotive paints (Double coat) and others including cabin and rear load van body (Inner and Outer)

Computerise stickering works with company users name, logo, number plate and staturoty letters etc

Dismantling of Gear Box, Clutch system and repairing of the same with above mentioned new items as required

Opening and dismantling of shaftline and re-fitting with new yoke, cross holder etc and repairing of old teeth

Self Starteropening, repairing and fitting

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

M/S B.S.INDUSTRIES (BID ID -1148842)

M/S. BHANJA ENGINEERING WORKS (BID ID -1148394)