Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹44.6 L+₹79,820.54 (1.82%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹44.8 L+₹99,594.16 (2.27%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹46.7 L+₹2.9 L (6.53%)Rejected-AOC | L4 | Rejected-AOC Being not L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
23 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
REPAIRS IMPROVEMENT TO CERTAIN BUILDING AT ALLENBY LINES UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD
2022_MES_532660_2
8591
Open Tender
Civil Works
Item Rate
300 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹80,000
Yes
1 Nov 2022
2 Sept 2022
26 Sept 2022
2 Sept 2022
23 Sept 2022
9 Sept 2022
Amount
Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces and removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc., complete all as specified and as directed.
Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed Note: Water proofing compound shall be measured and paid separately under relevant item in this schedule
M & L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applied on one coat of oil based bitumen emulsion primer @ 0.3 lit per Sqm (OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced (torch) application with 10cm overlaps. A coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm to be applied on top of membrane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified and as directed.
M & L for wire brush and cleaning any type over roof and chhajja top surface etc., including flashings and junction of parapets, etc., and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 Kg per Sqm, blinded with grit or pea size gravel @ 0.006 cum per Sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and as directed.
M&L for filling cracks with polymer based chemical (Dr fixit cracks shrink free) for cracks not exceeding 10 mm in width as per manufacturer instruction on wall surfaces on concrete or masonry including scaffolding etc., complete all as specified and as directed. Make:- Dr fixit /Berger / Perma
Taking down cement plaster from brick/stone wall of any description etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces in two coats (10 + 5 mm), both coat mixed with integral water proofing compound ISI Marked @ 2% by the weight of cement and finishing the surface even and fair complete all as specified and directed Note: Water proofing compound shall be measured and paid separately.
Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and as directed
M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches not exceeding 3 Sqm each patch complete all as specified and as directed.
Supply only water proofing compound complete all as specified and as directed.
M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying two coats of cement base paint of any colour complete all as specified and as directed.
Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
M&L for complete removal of existing treatment of external surfaces of wall including removing fungus /algae dirt, oil, grease and loose particles by wire brush, cleaning, washing and removing dust. Cracks less than 2 mm, should be cleaned free of dust with a vacuum cleaner, etc., and applying 3.00 mm thick white cement based wall care putty for a smooth finish complete all as specified and as directed. Note:-Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works etc. Make:-Birla White / Asian Paint / Diamond wall putty /JK Putty
M&L for applying 2 coats of apex ultima weather proof paint over a coat of apex ultima primer including preparation of surface complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash on ceilings complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall putty etc., complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for half brick thick walls with fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etc., and removal of rubbish/ demolished materials outside of MoD land complete all as specified and as directed.
M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 etc., complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar (1:4) as in backing coat of cement plaster for laying of wall tiles etc., complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm (any approved shade of square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm (any approved shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and as directed.
M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and directed.
M&L for double charged vitrified ceramic tiles of any approved shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in walls skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and as directed.
S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed.
M&L for glazed (Coloured) ceramic tiles in vertical surfaces 300 x 450 x 7 to 8mm/ 450 x 350 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc., complete all as specified and as directed.
Dismantling stone slabs and tiles of any description or thickness in floors aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed.
M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen platform jointed and set in cement mortar 1:3 and fixed including rounding to edge of stone slabs one side edge etc., complete all as specified and as directed.
M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.
Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.
Demolition of concrete in sunken floor including removal of filling etc., complete including removal of demolished material to a distance complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair face of brickwork or concrete surfaces of sunken floors duly mixed with water proofing compound as per manufacturer's instructions in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant items in this schedule.
Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per Sqm after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP polymeric membrane of weight 3 kilogram per Sqm and minimum 3mm thick reinforced with polyster non oven fabric (weight not less than 150 gm/Sqm) over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per Sqm over that providing a sand layer of 25mm thick thick in sunken floors complete all as specified and as directed.
M&L for plain cement concrete, Type E2 (1:5:10) mix (using 40 mm graded stone aggregate) for filling in sunken floor and mass concrete complete all as specified and as directed.
Dismantling / taking down PVC/ Cast iron soil /waste pipes 100 mm / 75mm bore including all fitting like bends etc., complete all as specified and as directed.
S&F PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent and cement concrete type B1 (1:2:4) & including removing old trap and fixing of stainless steel grating in round shape etc., complete all as specified and as directed.
S&F 75mm bore UPVC/PVC (SWR) pipes single socketed (ISI Marked) any length with rubber ring joints, complete fittings etc., fixed to wall fixed with MS clamps 8mm dia with two nuts wall nails etc., complete all as specified and as directed.
S&F 110mm bore UPVC/PVC (SWR) pipes single socketed (ISI Marked) any length with rubber ring joints, complete fittings etc., fixed to wall fixed with MS clamps 8mm dia MS steel with two nuts wall nails etc., complete all as specified and as directed.
S&F 75mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc., complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius diminishing pieces or tapers with access doors etc., complete all as specified and as directed.
S&F 75mm bore PVC (SWR) branch piece, single (single 'Y') equal or unequal with access doors etc., complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) junction single (single 'T') equal or unequal with access doors etc., complete all as specified and as directed.
S&F for 75mm bore PVC (SWR) vent cowl etc., complete all as specified and as directed.
S&F for 110 mm bore PVC (SWR) vent cowl etc., complete all as specified and as directed.
Supply and fix 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6kgf/Sqcm fixed to wall ceiling or in floors etc., complete all as specified and as directed
Taking up or down steel tubing and connections, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and as directed.
Taking up or down steel tubing and connections, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and as directed.
Taking up or down steel tubing and connections, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.
M&L for cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line, making good of all cutting surfaces with cement mortar 1:6 on brick or concrete surfaces etc., complete all as specified and directed.
S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, male and female threaded Adoptor and end pieces etc., to receive fittings and fixed with solvents fixed to walls/ceiling with clamps in shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc., complete all as specified and as directed.
S&F Tubes ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm bore complete all as specified and directed.
M&L for cutting holes into or through brick/stone walls built in cement mortar of superficial area not exceeding 150 Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed
S & F in repairs anodized aluminium alloy powder coated curtain rod 19 mm dia of standard thickness with fixing brackets, stops, rollers etc., complete all as specified and as directed.
Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed
Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and as directed.
Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated (Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. (outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm, and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and average width of aperture 1.4mm shall be used for fly proofing. 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square safety grills, locking arrangement and all necessary accessories etc., complete all as specified and as directed. Make: NCL Alltech or equivalent as approved by GE.
S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS square tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc., complete all as specified and as directed.
Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2020 complete all as specified and as directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2020 as applicable complete all as specified and as directed.
S & F Butt hinges MS 100 mm cold rolled complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section with bright bolt complete all as specified and as directed.
Supply and fix extruded aluminium alloy handles, fabricated type, anodised of 150 mm size complete all as specified and as directed.
S&F in repairs MDF board, 18/19 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws, brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging complete all as specified and as directed.
S&F in repairs MDF board, 12 mm thick exterior grade, pre-laminated both side decorative face lamination fixed with screws ,brackets to timber frame work with and including 1st class hard wood, 6 mm thick all around edging, complete all as specified and directed.
S & F continuous (piano) hinges, mild steel, bright finish or electro-galvanised 40mm width of flap fixed with screws as in repairs complete all as specified and as directed.
Supply and fix in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
M&L for dismantling wall and ceiling boards (fibre, pulp, insulation etc.,) or insulation boards / slabs / blankets any thickness including cover fillets etc., complete all as specified and as directed.
S&F in repairs false ceiling of Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES SILHOUETTE EXPOSED GRID SYSTEM. The tiles should have humidity Resistance (RH of 99%, NRC 0.55 Light reflectance 85% thermal conductivity K=0.052-0.057 w/m k. colour white, fire performance class O class 1 (BS476 Part 6 & 7) in module size of 600 x 600 x 16 mm thick with Bio black coating on the face of the tile, suitable for Green building application, with the re cycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kg per Square metre. Silhouette main rummers & cross Tees to have mitred ends and "birds mouth" notches to provide mitred Cruciform junctions. The Tee sections should have a galvanizing of 120 grams per square metre & passed through 500 hours of salt test complete all as specified and as directed. Note : The quoted rate is deemed to be inclusive of cost of necessary scaffolding work required at site. Make: Armstrong/Saint Gobain or equivalent as approved by GE.
S & F E-Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc., complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc., complete all as specified and as directed.
S&F stainless steel sink with drainage board, 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement mortar to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc., complete all as specified and as directed.
S&F in repairs stainless steel kitchen plate rack of size 786x914x254mm complete all as specified and directed. Make: Cat Part No. P-348 of Prayag polymers Pvt Ltd or equivalent as approved by GE.
S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.
S&F in repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per required colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc., complete all as specified and as directed.
S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for and pinning in end of brackets including 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.
S&F in Low level flushing cistern 10 ltr capacity, PVC including waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed.
Supply and fix in repairs PVC waste pipe 32/40 mm dia fixed to WHB/Kitchen Sink complete all as specified and as directed.
S&F in repair CP corner glass 12mm thick with brass bracket screws etc., complete all as specified and as directed.
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
Supply and fix in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed.
S&F in repairs urinal with fixing accessories set of size 375 x 315 x 620mm including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed. Make: Jaquar URS-WHT-13250 or equivalent as approved by GE.
Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed Make: CAT No 92072 of HINDWARE (S-10/P-18) Pastel colour or equivalent in PARRYWARE/CERA as approved by GE.
Supply and fix in repairs vitreous China wash basin with full pedestal star white of size 580 x 435 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. Make: CAT No 10086 or HINDWARE or equivalent in Jaquar PARRYWARE/CERA as approved by GE.
S&F in repairs vitreous China counter top wash basin of size 600 x 450 x 190 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. Make: CAT No Jaquar Code- QNS-WHT-7601 or equivalent in HINDWARE/PARRYWARE/CERA as approved by GE.
Material and labour for cutting of existing granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangements complete all as specified and as directed
Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed Make: CAT No F880007 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved
Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed. Make: CAT No F840010 of HINDWARE or equivalent in JAQUAR / PARRYWARE/CERA as approved by GE.
Supply and fixed in repairs soap dish brass complete all as specified and as directed. Make: CAT No F880011 of HINDWARE or equivalent model in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: CAT No F880003 or HINDWARE or equivalent in JAQUAR/PARRYWARE/CERA as approved by GE.
S&F in repairs CP brass 32 mm bottle trap for wash basins/urinals with inlet and outlet screwed for pipe connections including necessary packing, union and cap and fixed complete all as directed. Make: Jaquar Cat Part No. ALD-CHR-769 or equivalent as approved by GE
Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provn for overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed. Make: F330020 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs 15mm bore brass chromium plated wall mixer with provn for both hand shower and overhead shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges (without) hand and overhead shower for mixing hot and cold water, screwed down complete all as specified and as directed. Make: F330022 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs 15mm bore brass Chromium plated central hole basin mixer with out popup waste system with 450 mm long braided hoses, screwed down complete all as specified and as directed. Make: F330014CP of HINDWARE or equivalent in Parryware/CERA as approved by GE.
Supply and fix in repairs over head shower 80mm dia round shape multi flow (ABS Body chrome plated with gray face plate) with rubit cleaning system complete all as specified and as directed. Make: CAT No F160008 of HINDWARE or equivalent in PARRY WARE/CERA as approved by GE.
Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm duly ISI marked complete all as specified and as directed.
Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs 15mm dia brass chromium plated Two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200004FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs 15mm dia brass chromium plated Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200003FT of HINDWARE or equivalent in PARRY WARE/CERA as approved by GE.
Supply and fix in repairs 15 mm bore brass chromium plated Pillar cock long neck with aerator, high pressure with crutch handle, screwed down, and screwed for iron pipe or for unions complete all as specified and as directed Make: CAT No F330002CP of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs of 15 mm bore stop cock, brass chromium plated angle cock with wall flange type, fancy type, and high pressure, with flange screwed and screwed both ends for iron pipe or for unions complete all as specified and as directed. Make: CAT No F200005FT of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
Supply and fix in repairs brass chromium plated concealed stop cock, regular body with adjustable wall flange screwed down, high pressure with crutch handle, screwed both ends for 15mm dia bore iron pipe or for unions complete all as specified and as directed. Make: CAT No F460018 of HINDWARE or equivalent in JAQUAR/ PARRYWARE/CERA as approved by GE.
S&F in repairs CP angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.
Supply and fix in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed Make: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE
Himagiri Constructions
M/S DIVIJA BUILDERS
M/s GM Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .