C/o Community Hall-Electrical Works

Amount

Supplying following type of surface/recess mounted LED light luminare with all accessories complete as reqd. at site. Recess mounted 36-42W (2x2) square down LED luminaries complete with non-integral electronic drive, made in powder coated CRCA/Aluminium housing with opel diffuser suitable to operate in 230V,50Hz AC supply etc, as required. (Make:Havells PLUTONEO2x2PLR42WLED857S OR SIMILAR )

Supplying following type of surface/recess mounted LED light luminare with all accessories complete as reqd. at site. LED Tube Light Complete With Batten , LED Lamp & associated accessories as per manufacturers technical specification, approved makes (Make: Havells MAGNUMRETROILS1x18PC )

Supplying following type of surface/recess mounted LED light luminare with all accessories complete as reqd. at site. LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENINg seperate driver compartment with IP65 protection and impact resistance of IK07. (Make: Havells model :ENDURAPEARLSL25WLED757SASYTOPC or similar)

Supply of 180 W LED Flood lights fitting with high power LED , epoxy powder coated high pressure die - cast aluminium housing with weather proof gasket, control gear, toughend glass cover/ clear polycarbonate front cover , with IP-66 protection and a colour temperature CCT of 5700K, high power LED 's with individual lense optics to get optimum optical performance, LED light fixture efficiency > 80 Lumen/ per watt, inbuilt surge protection upto 5KV, heat sinks, Average life of LED ≥ 50000 burning hrs, and suitable for voltage range of 140- 280V AC Supply with suitable fixing arrangement on truss work complete as required.

Supply of surface & wall mounted 20-22W LED Batten with extruded aluminum housing and robust construction complete with integral electronic drive, suitable to operate in 230V,50Hz AC supply etc, along with mounting accessories complete as required.(Equivalent to Havells Model No.ENDURALINERNEOBS20WLED865SPCWH or Similar)

Supply of 70 W LED type designer Post top Lantern light fixtures having high pressure powder coated die cast aluminium housing with top cover and high impact polycarbonate/arcylic protector/diffuser , with min IP-65 protection and a colour temperature CCT of 5700 + 300K, high power LED 's with individual lense optics to get optimum optical performance, LED light fixture efficiency > 80 Lumen/ per watt, Average life of LED ≥ 50000 burning hrs, and suitable for voltage range of 140- 280V AC Supply with fixing arrangement on min 65 mm dia GI pipe, complete as reqd. (Make: Havells Model No. TYCOONPT70WLED&%&PSYMTOPC or Similar).

Supply of following type of fan suitable for operation on 230 volts,single phase, 50 Hz A.C supply and as per the makes & detail specification . (a) Exhaust fan 300mm , 1400 rpm heavy duty.

Supply of 450 mm sweep 1400 rpm with metallic lustre finish, minimum 85° oscillation for wider coverage, integral switchgear box, height adjustable stand and push Button regulator, Air circulator Pedestal fan suitable for operation on 230V, 50HZ single phase AC supply as required.

Supply of Automatic Hand Dryers of 2500W with full Stainless Steel Body and projected nozzle with timer auto cut off with all standard accessories etc as required.

Supply of Hot & Cold RO+UV water purifier with storage capacity of cold tank of 4litres hot tank of 1.5litres and header tank of 11 litres of make Aquaguard or its equivalent.

Supply of following sizes XLPE insulated and PVC sheathed Aluminium conductor, armoured LT cable of 1.1 KV grade conforming to IS-7098 (Part-I) with upto date amendments etc complete as required. (a) 3 ½ X 150 Sq.mm

Supply of following sizes XLPE insulated and PVC sheathed Aluminium conductor, armoured LT cable of 1.1 KV grade conforming to IS-7098 (Part-I) with upto date amendments etc complete as required. (b) 4 X 35 Sq.mm

Supply of following sizes XLPE insulated and PVC sheathed Aluminium conductor, armoured LT cable of 1.1 KV grade conforming to IS-7098 (Part-I) with upto date amendments etc complete as required. (b) 4 X 16 Sq.mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/ submain wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (a) 2 x 2.5sqmm + 1 x 2.5 sq.mm

Wiring for circuit/ submain wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (b) 4 x 2.5sqmm + 2 x 2.5 sq.mm

Wiring for circuit/ submain wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (c) 2x 4 sqmm + 1 x 4 sq.mm

Wiring for circuit/ submain wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (d) 4x 4 sqmm + 2 x 4 sq.mm

Wiring for circuit/ submain wiring with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required (e) 2x 6 sqmm + 1 x 6 sq.mm

Supplying and fixing of following sizes of steel conduit along with the accessories in surface /recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm Steel Conduit

Supplying and fixing of following sizes of steel conduit along with the accessories in surface /recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (b) 25 mm Steel Conduit

Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 6 Module (200mmX75mm) modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a)15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. b)3 pin 5/6 A socket outlet

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way (8 + 12), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (a) 4 way, Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (b) 8 way, Double door

Supplying and fixing following ratings and following series, miniature circuit breaker/Isolator suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required from Havells Eurobreaker or equivalent. (a) TPN C series MCB-63 Amp-Incomer

Supplying and fixing following ratings and following series, miniature circuit breaker/Isolator suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required from Havells Eurobreaker or equivalent. (b) SPN C series MCB-32 Amp-Incomer

Supplying and fixing following ratings and following series, miniature circuit breaker/Isolator suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required from Havells Eurobreaker or equivalent. (c ) C series SP MCB 6-32 A 240 V rating

ITC of street light fitting including supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of LED street light fitting on pole including bending the pipe to the required shape, with suitable clamping, painting with primer and finish paint etc. as required.

Installation testing and commissioning of following fittings by fixing fasteners on ceiling /surface/recess by drilling holes, supplying and fixing chain/clamp for fixing of fitting including connection with 1.5 sqmm FRLS PVC insulated, copper conductor, single core cable and earthing etc. complete as reqd.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required. a) 150 mm width x 50 mm depth x 1.6 mm thickness.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (a) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. (b) upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a)Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (b)upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a)upto 35 sq. mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for 3½ X 150 sq. mm size of PVC insulated and PVC sheathed / XLPE conductor cable of 1.1 KV grade as required.

Providing , fixing and laying of 100 mm dia G.I. pipe (medium class) in existing trench i/c threading and coupling etc as required.

Cutting the bituminous road / PCC surface upto 20 cm width and 50 cm depth manually or with help of suitable tools and plants and disposal of debris upto 50 mtr suitable and making good the road with cement concrete of mix 1:3:6 etc complete as required

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 x 150 sq. mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 x 35 sq. mm.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 16 sq. mm.

SITC of flood light mast made up of 100 mm dia GI pole of 6 mtrs, with suitable bracket arrangement with supports for installation of 3 nos. of 180 watt LED flood lights, including necessary provision for taking in/out the cable, required foundation arrangement with MS base plate 300mmx300mmx5mm welding at bottom of pole, painting on the pole etc. required as per site.

SITC of light mast made up of 65 mm dia GI pole of 3 mtrs, with suitable bracket arrangement with supports for installation of lantern type LED flood lights, including necessary provision for taking in/out the cable, required foundation arrangement with MS base plate 300mmx300mmx5mm welding at bottom of pole, painting on the pole etc. required as per site.

Supply and fixing of side hinged-door fixed with base SMC junction Box of size 250 x 200 x 105mm (Loop-in-Loop-out Box) on the GI pole with suitable size MS clamp including providing & fixing 63A, 4Pole connector for loop in & loop out to terminate 2Nos, 4 core 16 sq. mm. armoured aluminium cable, 6Amp SP MCB in din rail, Interconnection etc. as required.(make: Sintex: model no. JS-JB-2520 or its equivalent)

Supply and fixing of side hinged-door fixed with base SMC junction Box of size 325 x 220 x 150mm (Double Door Hinged) (Loop-in-Loop-out Box) on the GI pole with suitable size MS clamp including providing & fixing 63A, 4Pole connector for loop in & loop out to terminate 2Nos, 4 core 16 sq. mm. armoured aluminium cable, & 5 no,s 16 Amp SP MCB in din rail, Interconnection etc. as required.(make: Sintex: model no. JS-JB-3726 or its equivalent)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

M/s S.T. Electricals