Sarath Block Rural Water Supply Scheme under D.W. and S. Division Madhupur on turnkey basis.

Amount

WATER TREATMENT PLANT

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labours and necessary equipment for designing & construction of Conventional WTP of 12.00 MLD capacity. With all complete job. (Please refer to Section 5,Sl. 2.3 of SBD)

Elevated Service Reservoir

3.00 Lakh liter capacity and 16 M stageing. (Zone -1)

2.00 Lakh liter capacity and 10 M stageing. (Zone -2)

2.50 Lakh liter capacity and 20 M stageing. (Zone -3)

3.00 Lakh liter capacity and 14 M stageing. (Zone -4)

5.00 Lakh liter capacity and 24 M stageing. (Zone -5)

3.00 Lakh liter capacity and 23 M stageing. (Zone -6)

2.00 Lakh liter capacity and 15 M stageing. (Zone -7)

2.50 Lakh liter capacity and 24 M stageing. (Zone -8)

3.50 Lakh liter capacity and 10 M stageing. (Zone -9)

2.00 Lakh liter capacity and 11 M stageing. (Zone -10)

1.00 Lakh liter capacity and 19 M stageing. (Zone -11)

3.00 Lakh liter capacity and 14 M stageing. (Zone -12)

2.50 Lakh liter capacity and 16 M stageing. (Zone -13)

Intake Well With Pump House 8.0M dia

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand construction of R.C.C Intake well with Pump house all complete job. (Please refer to Section 5,Sl. 2.1 of SBD)

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in all kind of soil including moorum soil, soil including with Kankar, pebbles and boulders upto 300 size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150 m and initial lift of 1.5 m as per specification and direction of E/I.

Initial Lift-

1st Lift-

Earthwork in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section inhard rock where blasting is needed and stacking properly in approved stack size in approved stack yard (beyond 50 m away from the edge of the trenches in the country side) with initial lead of 150m. and initial lift of 1.5 m as per specification and direction of E/I.

2nd Lift-

3rd Lift-

4th Lift-

5th Lift-

6th Lift-

6th Lift-

7th Lift-

Providing PCC M-150 with nominal mix of (1:2:4) in foundation with approved quality of stonne chips 20 mm to 6 mm size graded and clean coarse sand F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per specification and direction of E/I.

Providing and laying in situ cement concrete of trap/ granite/ quartzite/ gniess metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood formwork, bully/ steel propups, compaction, finishing and curing etc complete (By weigh batching and mix design for M-250 and M-300 only. (excluding M.S. or Tor)

Providing and costing in situ cement concrete of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawing and design or as directed by Engineer-In-Charge including normal dewatering, centering plywood, ormwork bully/ steel prop ups, compaction finishing the formed surface with 1:3 sufficient minium thickness if special finish is to be provided and curing etc complete (excluding the cost of reinforcement) For RCC M-300 grade slabs/landings/ vertical walls/ waist slabs/ steps for stair case in foundation stain wall of Intake well

Providing and costing in situ cement concrete of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawing and design or as directed by Engineer-In-Charge including normal dewatering, centering plywood, ormwork bully/ steel prop ups, compaction finishing the formed surface with 1:3 sufficient minium thickness if special finish is to be provided and curing etc complete (By weigh of batching and mix design for M-250 only) excluding the cost of reinforcement

Providing and casting in situ cement concrete of trap/ granite/ quartzite/ gneiss metal of approved quality for RCC work as per detailed drawing and design or as directed by Engineer-In-Charge including normal dewatering, centering plywood, ormwork bully/ steel prop ups, compaction finishing the formed surface with 1:3 sufficient minium thickness if special finish is to be provided and curing etc complete excluding the cost of reinforcement

Providing R. C. C. M - 250 in columns with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F. M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and plaacing in position, vibrating, striking, curing ( but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I.

Providing R. C. C. M - 250 in band at lintel level with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F. M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and plaacing in position, vibrating, striking, curing ( but excluding the cost of reinforcement, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C. M-250 in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.

Providing av. 63 mm thick R.C.C. M-200 with nominal mix of (1:1.5:3) in chajja with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, centering, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, 6 mm cement plaster (1:4) in ceiling and sides of chajja with sand of F.M. 1.5, curing (but excluding the cost of reinforcement), taxes and royalty all complete as per building specification and direction of E/I.

Providing tor steel reinforcement of 12mm dia rods as per approved design and drawing exclding carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I TMT

Providing designation 75A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortart joints, cost of screening, materials, scaffolding raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction E/I.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS - 1038 joints met and welded with 100x16x3 mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm, size including cost of oxidized iron fittings, with hinges, handle per steps, catch springs, 3 mm thick plain glass panes with Aluminium beads and inner frame fixed with lugs with 20 mm long 6.3 mm G. I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2 mm at 100 mm. Centres and braced with M.S. flat diagonals 20x3 mm with top and bottom rails of T. iron 40x40x6 mm with 38 mm dia steel pulleys complete with bolts, nuts, locking arrangements, stopers, handles including applying a priming coat of red lead paint, carriage, hoisting and taxes all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.

Providing R.S. Joist ISMB 350x140 mm size fitting and fixing in position including cutting to required in shape and size, its carriage applying a primer coat of red lead paint etc all complete as per building specification and direction of E/I. (Below roof lab for base of V.T. pump) (As per (c)(iii) 11.5 M @ 52.40 Kg/M)

Providing & fixing GI pipe railing having 1 m height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 m c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour and shade including cost of all labour, transporting bends to curved shape, etc. complete.

Providing and fixing M.S. sluice gates in position as per detailed drawing and specification including cost of all materials, labour, operating pedestal, connecting rod, painting with three coats of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. (MJP 2016-17 Item 12)

Providing and fixing in position C.I. / M.S. rose pieces in intake wells including cost of all materials and labour, painting with three coats of anti-corrosive oil paints, etc. complete as directed by Engineer-in-charge.

Supplying materials and labour for fixing 20 mm dia M.S. bar steps in stening wall of 0.30 m internal and staggered in (1:2:4) cement concrete including scaffolding and curing etc all complete as per specification and direction E/I.

Carriage of material from divisional store are kiln side or quality side to work including contractor profit loading ,unloading transportation are complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 6 KM lead

Stone/Stone Chips 11 KM lead

Gangway 150M long and 3M wide

Earth work in excavation of foundation trenches of toe wall, spillway, head regulator, outlet, intake well etc. as per designed section in all kind of soil including moorum soil, soil mixed with kankar, pebbles and boulders upto 300 mm size and disposal of the same (beyond 50 m away from the edge of the trenches) with initial lead of 150m and initial lift of 1.5m as per specification and direction of E/I.

Initial Lift-

1st Lift-

Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality stone chips of 20mm to 6mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concretein mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying insitu cement concrete of trap/ granite/ quartzite/ gnesismetal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction, finishing, curing etc. (By weigh batching and mix design for M-300 only).

Providing and laying insitu cement concrete of trap/ granite/ quartzite/ gnesismetal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction, finishing, curing etc. (By weigh batching and mix design for M-300). In Column

Providing and laying insitu cement concrete of trap/ granite/ quartzite/ gnesismetal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, plywood form work, bully/steel propups, compaction, finishing, curing etc. (By weigh batching and mix design for M-250).

Providing R.C.C.M-200 in nominal mix of (1:1.5:3) in foundation with approved quality stone chips of 20mm to 6mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concretein mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete, as per building specification and direction of E/I.

Providing R.C.C.M-200 in nominal mix of (1:1.5:3) in roof slab with approved quality stone chips of 20mm to 6mm size graded and clean course sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concretein mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement), taxes and royalty all complete, as per building specification and direction of E/I. In Slab

Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved design and drawing excluding carriage of bar to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per specification and direction of E/I. (TMT Fe-500 only valid for SAIL & TATA Steel)

Providing 12mm thick cement plaster (1:4) with approved quality of sand of requisite F.M. (2.5 to 3.0) washed and screened including curing, Scaffolding where ever required and its removal royalty and all other taxes etc. complete job as per specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean course sand of F.M. 1.5 including screening, curing with all leads & lifts of water, Scaffoldings, taxes & royalty all complete as per building specification & direction of E/I.

Providing and fixing G.I. pipe railing having 1.0m height consisting 50x50x6 mm thick M.S. angles as verticals at 1.5m c/c, and additional poles at every corner with three rows of 25mm dia G.I. pipes of medium class variety as horizontal and painting three coats of oil paint over 1 coat of anti corrosive paint of approved colour & shade including cost of all labour, tranporting bends to curved shape etc. complete.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffloding, curing and all taxes complete as per building specifications and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete.

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Stone/Stone Chips 10 KM lead

Mechanical & Electrical Work at Intake well

Supply, installation, testing and commisssioning of vertical turbine pumpsets with allied equipment as under (Please refer to Section 5,Sl. 2.4 of SBD)

VT Pump : Supply, Installation, Testing & Commisioning of water lubricated vertical Turbine Pumpset as per IS : 1710/1972 (Make Kirloskar / WPIL / Mather & Platt), single/multi statge, Radial / Mixed flow, capable of discharging 68.03 LPS with head of 50 Mtr, consisting of bowl assembly dynamically balanced bronze impellers, stainless steel punp shaft and line shaft of 8M flanged column assemblies of 1.5 M length and with 9mm thick MS fabricated column assembly with strainers, prelubrication tank, non reverse ratchat coupling, pressure gauge, required size of sluice valve and non-return valve with all accessories.includung -

INDUCTION MOTOR : Above mentioned pump shall be coupled with SPDP / TEFC vertical hollow shaft squirrel cage induction motor confirming IS : 325, IE3 rating having 15% more BHP than that of Pump, operating on 3 phase, 415 Volt, 50 Hz with 1500 rpm (make Kirloskar / BHEL / Crompton Greaves / ABB) all Complete along with suitable discharge head base plate & accessories such as suitable MS column pipe flanged type 60 ft , spited bearing , line shaft - bush foot valve with strainer , sluice valve ratio P.N. 1.6 NR valve , pressure gauge including cost of construction PCC foundation with cement sand stone chips bolt nut , spring washer ,etc. and making delivery pipe with piping works required for the job , etc. all complete job testing of pump set on full as per standard specification and direction of E/I.with complete all valves & accessarie. Complete with all respect.

Discharge 68.03 LPS with head of 50 Mtr (2 Working & 2 standby)

APFC PANEL : Supply, Installation, Testing & Commissioning of APFC Panel with suitable capacitor bank for operation on 3 ph, 415 V, 50 Hz with extremely discharging resistances, earthing terminals and built on suitable MS frame with terminal cover box . Complete with all respect. (50 KVAR)

STARTER : Supplying fully automatic star delta starter to operate induction motor working on 415, 3phase, 50Hz with with no volt coil, over load element, ON / OFF Push button , with necessary materials and connected to supply etc complete starter with original sheet steel enclosure. Complete with all respect.

EARTHING : Earthing with Copper earth plate including accessories and providing masonry enclosure with cover plate having looking arrangement and watering pipe of 2.7 M LONG ETC WITH CHARCOAL / Coke and salt, confirming IS 3043 FOR EACH Motor. Complete with all respect.

CRANE : Supplying Single Girder hand operated / Rectangular travelling crane with 6 M lift complete with chain pully block, ISI Marked and travelling trolly. Both tested for 50% overload including arrangement for longitudinal travel / Circular travel and Cross travel with wheel, hand chain etc.

3 Metric Ton Capacity ( up to 5 M span)

CABLE : Supplying PVC / XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Confirms to IS : 1554, PART-I) 300 sqmm , 3.5 core (2 runs)

Supplying XLPE / PVC insulated armoured cable 1100 V grade with ISI Mark three core Solid / stranded copper conductor with 6 mm thick 25 mm width MS spacer with GI eartwire 6 sqmm complete in an approved manner : 3 core 50 sqmm Cable : MCC to Motor

Transformer Installation : Cost of construction PCC foundation / Plinth for mounting transformer including DP Structure in PSC pole with different type of MS Channels, MS Angles, brackets, insulators, AB Switch, three sets of Horn gap fuse, fuse and lightening arrestor , nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos. neutral and body each respectively)with all required material, manpower, cost of providing disc & pin insulators for HV & LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All the work as per IE Rules and JBVNL guidelines and as per instruction of EIC. Complete with all respect. 315 KVA , 11/0.415 KV Transformer with complete installation as per IE rules

LIGHTING : Providing internal and external lighting by doing wiring and installation of fixtures e.g suitable wattage LED Lighting fixtures in pump house, gangways, etc. complete with all respect.

SAFETY ITEMS: Supply, Installation of Lightening arresters 2 nos., Fire extinguisher, First aid box, Discharge rod, Insulating Mat for electrical equipments, Electric Shock treatment chart, fuse puller etc as per IE Rules as per instruction of EIC. Complete with all respect.

(Mechanical & Electrical Part at WTP)

Suply, installation, testing and commisssioning of horizontal casing centrifugal pumpsets with alied equipment as (Please refer to Section 5,Sl. 2.5 of SBD)

Supply erection and commissioning of multi stage horizontal split casting centrifugal pump (make WPIL / Kirloskar / Mather & Platt) as per IS, capable of discharging as required flow & Head, mounted on common base plate with energy efficient horizontal foot mounted shaft TEFC squirrel cage induction motor (IE3) than that of pump, operating on 1500 RPM, 415 V, 3 Phase, 50 Hz (Make Kirloskar/ABB/BHEL/Crompton) all complete with required size of sluice valve and non-return valve standard fittings, strainers, pressure gauge, MS pipes, Nut & bolts, packing, fitting & fixing, labour & technician, etc., complete job as per requirement and direction of E/I

For Group 1 (ESR 1,2,3,4,5 & 6) - 71.86 LPS x 150 Mtr. 2 Nos.( 1 Working & 1 Standby ) Each

For Group 2 (ESR 7,8 & 9) - 31.05 LPS x 107 Mtr , 2 Nos.(1 Working & 1 Standby ) Each

For Group 3 (ESR 10, 11,12 & 13) - 33.15 LPS x 125Mtrs, 2 Nos.( 1 Working & 1 Standby ) Each

APFC PANEL : Supply, Installation, Testing & Commissioning of APFC Panel with suitable capacitor bank for operation on 3 ph, 415 V, 50 Hz with extremely discharging resistances, earthing terminals and built on suitable MS frame with terminal cover box . Complete with all respect. (125 KVAR)

STARTER : Supplying fully automatic star delta starter to operate induction motor working on 415, 3phase, 50Hz with no volt coil, over load element, ON / OFF Push button , with necessary materials and connected to supply etc complete starter with original sheet steel enclosure. Complete with all respect

For 240 HP Motors

For 100 HP Motors

EARTHING : Earthing with Copper earth plate including accessories and providing masonry enclosure with cover plate having looking arrangement and watering pipe of 2.7 M LONG ETC WITH CHARCOAL / Coke and salt, confirming IS 3043 FOR EACH Motor. Complete with all respect.

CRANE : Supplying Single Girder hand operated / Rectangular travelling crane with 6 M lift complete with chain pully block, ISI Marked and travelling trolly. Both tested for 50% overload including arrangement for longitudinal travel / Circular travel and Cross travel with wheel, hand chain etc.

5 Metric Ton Capacity ( up to 5 M span)

CABLE : Supplying PVC / XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Confirms to IS : 1554, PART-I) 400 sqmm , 3.5 core (2 runs)

Copper conductor 3 core XLPE / PVC insulated & unarmoured cable Supplying XLPE / PVC insulated unarmoured cable 1100 V grade with ISI Mark three core Solid / stranded copper conductor with 6 mm thick 25 mm width MS spacer with GI 6 sqmm complete in an approved manner :

3 core 185 sqmm

3 core 70 sqmm Cable

Transformer Installation : Cost of construction PCC foundation / Plinth for mounting transformer including DP Structure in PSC with different type of MS Channels, MS Angles, brackets, insulators, AB Switch, three sets of Horn gap fuse, DD fuse and lightening arrestor , nut bolts, fabrication work required for the job, cost of earthing of transformer (Two nos. neutral and body each respectively)with all required material, manpower, cost of providing disc & pin insulators for HV & LV side of the transformer, testing of dielectric strength of transformer oil etc. for transmission of power. All the work as per IE Rules and JVNL guidelines and as per instruction of EIC. Complete with all respect. 1000 KVA Transformer 11000/433 volts with on load Tap Changer with complete installation as per IE rules.

SAFETY ITEMS: Supply, Installation of Lightening arresters 2 nos., Fire extinguisher, First aid box, Discharge rod, Insulating Mat for electrical equipments, Electric Shock treatment chart, fuse puller etc as per IE Rules as per instruction of EIC. Complete with all respect.

Raw Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw & clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS 8329/2000 in standard length of class K- 9 suitable for push on joint (Rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance carriage to work site with loading unloding etc stacking including inspection charges and all taxes complete.

DI-K9 350mm dia

Supplying labours tools and tackles for testing of lead CI or UPVC or HDPE or AC or DI pressure pipe upto 60 m head of water all complete as per direction of E/I. (Water to be supplied free of cost departmentally)

350mm dia

Providing and supplying ISI standards D.I. specials & fitting with sealing rubber gasket of S.B.R. complete with cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for DI pipes including ED, CST, all taxes etc complete as per IS 9523 .

Providing double flanged sluice valve confirming for IS 2906/14846 including worn gear arrangement as per test pressure stainless steel spindle, caps including all transportation etc complete (without bypass arrangement PN 1.6

Sluice Valve 350mm dia

Providing and supplying Air Valve as per IS -14845 - 2000 and MJP’s standard specifications of approved make and quality of following diameters including all taxes (Central and local), railway freight, inspection charges, unloding from railway wagons, loading into truck, transportation upto departmental stores / site, unloding and stacking etc. complete. (P.N. 1.6)

50 mm dia air valve

Earthwork in excavation (As per IS 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/I.

Earthwork in excavation in ordinary rock or soft rock(where blasting is not needed)(vide classification of soil item c) with initial lead of 10 M and initial lift of 1.5 m including dessing making the sites in proper profile and dressing the bed in proper grade etc. all complete as per specification and direction of E/I

Supplying labours, tools, tackles lubricants etc for laying and jointing DI/C.I.S./ S tyton pipes (class LA) trench without rubber gasket (making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost and laying of pipes is to be done as per (ISS 3114-1985) as per specification and direction of E/I.

DI-K9 350mm dia 3500m length

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer- in-charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc. complete (for all class of valves)

50 mm dia air valve

Supplying labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. tail piece including making lead caulked joints and flanged joints as per I.S.S. specification, including supplying all jointing materials (pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts and bolts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.

Sluice Valve 350mm dia

Earth work in backfilling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I

Construction of B.W. masonary valve chamber of size 1.50x1.20x1.50 m as per enclosed

Supply all materials and construction of thrust block where required.

Clear Water Rising main.

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Laying of Raw & clear water Rising Main (Please refer to Section 5,Sl. 3.0 of SBD)

Supplying centrifugally cast (Spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS 8329/ 2000 in standard lengths of class K- 9 suitable for push on joint (Rubber Gasket Jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance carriage to work site with loading and unloading etc, stacking including inspection charges and all taxes, all complete

DI-K9,100 mm Dia

DI-K9,150 mm Dia

DI-K9,200 mm Dia

DI-K9,250 mm Dia

DI-K9,300 mm Dia

Supplying labours, tools and tackles for testing of lead, CI or UPVC or HDPE or AC or DI pressure pipe up to 60m head of water all complete as per specification direction of E/I (water to be supplied free of cost departmentally)

DI-K9,100 mm Dia

DI-K9,150 mm Dia

DI-K9,200 mm Dia

DI-K9,250 mm Dia

DI-K9,300 mm Dia

Providing and supplying ISI standard DI specials and Fitting with sealing rubber gasket of S.B.R complete with cast iron follower gland and M.S. nut and bolts coated or other wise prootected from rusting and suitable for DI pipes including ED, CST, all taxes etc. complete as per IS 9523.

Providing double flanged sluice valve confirming for IS 2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all transportation etc. complete. (without bypass arrangement PN 1.6 (with ED) (With CP 10%)

DI-K9,100 mm Dia

DI-K9,150 mm Dia

DI-K9,200 mm Dia

DI-K9,250 mm Dia

DI-K9,300 mm Dia

Providing and Supplying air valves as per IS-10845-2000at MJP's standard specifications of approved make and quality of following diameters including all taxes (central & local), railway freight, inspection charges, unloading from railway wagons, laoding in to truck, transportation upto departmental stores/ site unloading and stacking etc. complete. (Airvalve singe ball flange/ Screwed type -PN- 1.6).

25mm dia Air Valve

40mm dia Air Valve

Earth Work in excavation (As per IS 3114/1965) for laying of different types and sizes of pipes so as to give 1m average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer-in-Charge b) classification of soil item-B

Earth work in excavation of foundation trenches as per design section in ordinary or soft rock (vide classification of soil item-C) and disposal of excavated materials so obtained (50m away from the edge of trenches) with initial lead of 150m and initial lift of 1.5m as per specification and direction of E/I. (in ordinary or soft rock where blasting is not required).

Supplying labours, tools, tackels,lubricanr etc. for laying and jointing DI/ CIS/ S Tyton pipes (Class LA) trenches supplying without rubber gasket and taking gasket joints including providing night guard, barrier and red light to safeguard against accident, all complete (pipe to be supplied departmentally free of cost and laying of pipes is to be done as per (I.S.S. 14-1985) as per design, specification and direction of E/I.

DI-K9,100 mm Dia

DI-K9,150 mm Dia

DI-K9,200 mm Dia

DI-K9,250 mm Dia

DI-K9,300 mm Dia

Lowering, laying and fixing in proper alignment and positioning all types of C.I. air valves as directed by Engineer-in-Charge including cost of conveyance from store to site of work, cost of all material and giving satisfactory hydraulic testing etc. complete. (for all class of valves). Air Valve single Ball (PN-1 and PN-1.6)

25mm dia Air Valve

40mm dia Air Valve

Supplying labour and toolsfor fixing C.I. sluice valve in trenches with a pair of C.I. tail piece including making lead caulked joints and flanged joints as per I.S.S. specification including supplying all jointing materials (pig lead confirming to I.S.S. 782-1978, yarn confirming to I.S.S. 6587-1972 and nuts & bolts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I.

100 mm Dia

150 mm Dia

200 mm Dia

250 mm Dia

300 mm Dia

Earth work in back filling the trenches after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge (for classification of soil item A & B)

Construction of B.W. Masonary valve chamber of size 1.20 x 0.90 x 1.50 Mt. as per enclosed annexure.

Construction of B.W. Masonary valve chamber of size 1.50 x 1.20 x 1.50 Mt. as per enclosed annexure.

Supply all materials & construction of Thrust block where required. (For 100mm & 200 mm dia)

Supply all materials & construction of Thrust block where required. (For 250mm & 300 mm dia)

DISTRIBUTION MAIN

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authorityand Providing all labour, materials, equipment to procure and laying of DI class K-7 pipes with Cement Mortar Lining for distribution main (Please refer to Section 5,Sl. 3.0 of SBD)

Earth work in excavation (As per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer in- Charge. (b) For classification of soil item - B

Earthwork in excavation in ordinary rock or soft rock(where blasting is not needed)(vide classification of soil item c) with initial lead of 10 M and initial lift of 1.5 m including dessing making the sites in proper profile and dressing the bed in proper grade etc. all complete as per specification and direction of E/I

Supplying tools and cutting road as well restoring the same as per specification and direction of E/I.

Pucca road (Except black top only taken out material to be used) for cutting road as per requirement. Assuming 40% of total road cutting.

Water bound macadam road (taken out material will be used) for cutting road as per requirement.

Dismaitailing plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15 m lead and disposal of un-serviceable materials with all leads all complete direction of E/I.

Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm - 6mm size graded and clea coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing taxes and royalty all complete as building specification and direction of E/I.

Earth work in backfilling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I (For classification of soil item B&C)

Supplying centrifugally cast (spun) ductile iron pressure pipe for water supply with socket and spigot ends confirming to IS 8329/2000 in standard lengths of class K-7 suitable for push on joint (rubber gasket jointing) with cement mortar lining on inside surface and outside zinc coating with bituminous paint including all other taxes insurance carriage to work side with loading, unloading etc. including inspection charges and all complete.

HDPE -89/110 (PE-80,PN-10)

Providing and supplying ISI standard D.I. Specials & Fitting with sealing rubber gasket of S.B.R., complete with cast iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including ED,CST, all taxes , etc. complete as per IS-9523 .

Supplying labours, tools and tackles for testing of laid C.I. or U.P.V.C. or H.D.P.E. or A.C. pressure pipe upto 60metre head of water all complete as per specification and direction of E/I. (Water to be supplied free of cost departmentally).

HDPE -89/110 (PE-80,PN-10)

Supplying labours, tools, tackles lubricants etc for laying and jointing DI/C.I.S./ S tyton pipes (class LA) trench without rubber gasket (making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost and laying of pipes is to be done as per (ISS 3114-1985) as per specification and direction of E/I.

HDPE -89/110 (PE-80,PN-10)

Labour charge for one cutting of cast iron pipe /D.I. and specials including supplying, necessary tools and plants, chipping or filling the surface finish as per specification and direction of E/I.

HDPE -89/110 (PE-80,PN-10)

Providing double flange sluice valve (Size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. (PN-1 without bypass arrangement, with E.D.) (with CP 10%)

Providing double flange sluice valve/ scour valve (Size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle, caps including all taxes transportation etc. complete. (PN-1 without bypass arrangement, without E.D.)

Providing, installing and giving satisfactory field testing of flanged ends bulk water meter of following type and as mentioned below in (a) and (b) with FGI-250 cast iron body, class "B" confirming to I.S. 2373 or as per ISO 4046, marked to read in metric system, along with manufacturers, test and guarantee certificate including cost of all material with ISI mark or EEC mark (enclosed type IS 2373)

Supplying labour and tools for fixing C.I. sluice valve in trenches with a pair of C.I. Tail piece, including making lead caulked joints and flanged joint as per I.S.S. specification, including supplying all jointing materials (Pig lead confirming to I.S.S. 782- 1978, yarn confirming to I.S.S. 6587- 1972 and nuts and bolts confirming to I.S.S. 1364-1983) including drilling holes in flanges if required as per specification and direction of E/I ( Sluice valve and pieces to be supplied departmentally free of cost).

Sluice valve

Scour valve

Construction of B.W. masonary valve chamber of size 1.20 x 0.90 x 1.50 mt as per enclosed annexure.

Construction of B.W. masonary valve chamber of size 1.50 x 1.20 x 1.50 mt as per enclosed annexure.

Twin Type Staff Quarter - 1 Unit (Please refer to Section 5,Sl. 2.7 of SBD)

E/W in Excavation in foundation trenches in ordinary soil (Vide classification of soil Item -A) & disposal of excavatd earth obtained to a distance up to 50 M including all lift leveling ramming the foundation trenches removing root of trees scrubs all complete as per approved design.

Providing ,coarse clean sand in filling in foudation trenches /in Plinth including ramming & watering in layers not exceeding 150 mm thick with all leads lift including cost of all materilas ,labour , royalty & taxes all complete as per building specification & direction Of E/I

Providing designation 75 A one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification & direction of E/I

Providing P.C.C M-100 in nominal mix of (1:3:6) in foundation with appoved quantity of stone metal (50 mm 25 mm dia size)graded & clean coarse sand of F.M 2.5 to 3 including screening , shuttering , mixing cement concrete in mixer & placing in position , vibrating , striking , curing taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M. (1:6) in foundation 7 Plinth with approved quality of clean coarse sand of F.M 2 to 2.5 including Providing 10 mm thick mortar joints ,Cost of screening , materials , Scaffolding , raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing 25 mm thick damp proof coarse with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20 mm to 6 mm size graded and clean coarse sand of F.M 2.5 to3 including screening , shuttering mixing cement concrete in mixer with 5% cico or any other approved water proffing compound and placing in position , vibrating , striing , curing , taxes & royalty all complete as per building specification & direction of E/I

Providing designation 75 A brick work in C.M (1:6) in super structure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing10 mm thick motar joints ,cost of screening , materials, scaffolding,raking out joints to 15 mm depth curing , taxes & royalty all complete as per building specification & direction of E/I

Providing R.C.C M-150 with nominal mix of (1:2:4) in lintel level with approved quality of stone chips 20 mm to 6mm size graded & clean coarse sand of F.M 2.5 to including screening , centring, shuttering and mixing cement concrete in mixer & placing in position vibrating striking curing (but excluding the cost of reinforcement ) taxes & royalty all complete as per building specification of (E/I.

Providing centering & shuttering etc

Providing average 63 mm thick R.C.C M -150 with nominal mix (1:2:4) chajja in shelves with approved quality of stone chips 20 mm to 6 mm size graded & clean coarse sand of F.M 2.5 to 3 including making drip course in concrete , screening , centering shuttering & mixing cement concrete in mixer & placing in position vibrating ,striking ,6 mm cement plaster (1:4) in celling & sides of chajja with sand of F.M 1.5, Curing ( But excluding the cost of reinforcement ) taxes and royalty all complete as per building specification of E/I

(a) Providing centering & shuttering etc

(b) Providing centering & shuttering etc

Providing R.C.C M-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size Graded & Clean coarse sand F.M 2.5 to including making drip course in cocrete , screening , concreting , shuttering , centring mixing cement concrete in mixer & placing in position , vibrating ,striking, curing (but excluding the cost of reinforcement) taxes & royalty all complete as per building Specification & direction of the E/I

Providing centering & shuttering etc

Supplying fitting & fixing good quality ,well dressed & well seasoned sal wood work in choukhat in doors , windows , skylights , fan light and C/W celestial windows openings , including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls & lintels all complete as per building specification & direction of E/I

Supplying fitting and fixing 250X20X6 mm L-type M.S Clamp properly fish tailed .including making holes and setting the same in 375 X125X75 mm cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and diection of E/I @6 for each door & 4 for each window Total Quantity -(2X3X6+2X4X4)=68 nos

Supplying all materials , labours and fitting & fixing 38 mm (1.5) thick good quality seasoned sal wood battened shutter ledged & braced in door and windows with oxidized iron fitting such as hingles ,sliding door bolts , tower bolts , handles or ings hooks and eye , cleats , sand block as per schedule , taxes & royalty all complete as per building specification & direction of Engineer -in- charge

Supplying , fittings & fixing M.S /Gril made of 20X6 mm M.S flat as per approved design & drawing properly fabricated with joints continous filllet welded and finshed smooth , carriage of grill to work site hoisting as per the building specification and direction of E/I ( where materials is not supplied by the Deptt .)

Providing 25 mm thick pre cast R.C.C M-150 with nominal mix of (1:2:4) in jali with approved quality to stone chips of 6mm nominal size and clean coarse sand of FM 2.5 to 3 with 1.6 mm thick M.S wire as per approved design and drawing and placing the same in position true to plumb and level and properly grouted with cement mortar (1:3) including cost of curing , Scaffolding and finishing all complete as per building specification and direction E/I

Providing and fixing fan hook of 16 mm dia M.S bar 1 meter long bent to reqired size and shape placed in position and fixing in R.C.C slab/beam at the time of casting all complete as per building specification of E/I where material is not supplied by cheet

Supplying , fitting and Fixing M.S Grill gate made of 20X 6 mm M.S or 16 mm M.S raurbar Flat fitted on 25 mm X 25 mm X 6mm M.S angle frame of size 60X60X6 as per approved design including cost of fabrication & drawing , properly fabricated with joints continuous fillet welded & finished smooth, providing necessary locking arrangements with Haskell & dummy duly fixed in C.C (1:2:4) blocks of reuired size applying a priming red lead paints over steel works , taxes , carriage of grill to work site , asper the building specification & direction of E/I ( where materials is not supplied by the Dept)

Providing 6 mm thick cement plaster (1:4) in celling with approved quality of clean coarse sand of F.M 1.5 including screening , curing with all leads & lifts of water , scaffolding , taxes & royalty all complete as per building specification & direction of E/I

Providing 12 mm thick cement plaster (1:6) with approved quality of clean coarse sand of F.M 1.5 including screening .Curing with all leads & lifts of water , Scaffolding , taxes 7 royalty all complete as per building specification & direction of E/I.

Providing cement 1:3 (12mm ) plaster with cement mortar (1:3) using clean coarse sand finishing with neat punning a dado 6" (150 mm) high a side room and out side wall upto plinth level includng screening , curing with all leads & lifts of water , scaffolding , taxes and royalty all complete as per building specification & direction of E/I

Filling in foudation trenches & Plinth in layers not exceeding 150 mm thick well watered ,rammed ,fully compacted & fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 m & lift of 1.5 m all complete as per building specification & direction of E/I ( Mode of measurement compacted volume)

Providing 25 mm thick . First class patent stone flooring (1:2:4) with stone chips in two layers ,bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips in pannels including cost of curing , finishing the surface smooth by rubbing with carborandum stone taxes & royalty with all complete as per building specification & direction of E/I

Providing designation 75 A one brick on edge flooring in C.M (1:4) with top surface flush pointed in CM (1:4) approved quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening ,raking out joints to 15 mm depth , curing taxes,royalty all complete as per building specification and direction (E/I)

Providing all materials , labours & doing two coat snowcem with approved quality of lime over the new surface including the cost of cleaning surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing ,scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing all materials,labours & doing 2 (two ) Coat colour washing over a coat of white washing over new surface with approved quality of lime & Colour over the new surface including the cost of clening surface thoroughly and removing the scales of smoke & ash marks with jhama rubbing , scaffolding washing of floor sand taxes all complete as per building specification and direction of E/I

Providing two coats of painting with readymix paint synthetic enamel paint over a coat of primer of approved shad and make over new wooden surface after cleaning, removing dirt scales ,smokes,grease and sand papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning , removing rust ,dirt ,scales ,smokes and grease and cleaning the surface thouroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I

Providing 2(two) coats of Paniting with ready mixed paints of approved shade & make over steel surafce including cleaning the surface thouroughly , scaffolding & taxes all complete as per building specification & direction of E/I

Providing 10 mm (TMT) Fe 500 TOR for steel reinforced as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire with cost of wore removal of rust placing the rods in position all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 6 KM lead

Stone/Stone Chips 11 KM lead

Water Supply Sanitation Installation (Plumbing work)

Supplying and laying GI pipes of approved make in trenches with red lead and yarn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials up to work site etc. all complete as per specification and direction of E/I.

i) 25mm GI. Pipe.

ii) 15 mm GI. Pipe.

Supplying materials and labours for fixing GI Pipes with red lead paints and yarn with screwed and sockted joints on wall, celling and floor including supplying of wall hooks of pipe clamp, wooden plugs, cutting pipe to size and threading ends where necessary all complete as per specification and direction of E/I.

i) 15 mm GI. Pipe

Supplying, fitting and fixing of GM ferrule of approved make in DI/CI main including drilling and tapping CI/DI main etc. all complete as per specification and direction of E/I.

Supplying and fixing GI fittings of approved make all complete as per direction of E/I.

(a) Elbow 15 mm dia

(b) Tee plane 15mm dia

(c) Nipple 15mm dia.

(d) Union Socket 25mm dia

(e) Union Socket 15mm dia

(f) Brass bib cock 15mm dia

(g) C.I stop cock 15mm dia

(h) C.I. stop cock 25mm dia

(i) Reducing Socket 25x15mm

(j) Tee 25x25x15mm dia

Supplying, fitting and fixing vitreous white glazed earthen were I W C of parry Hindustan or any other I.S.S approved make with 100 mm HCI ‘P’ trap, 15 Liters CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings C.I. or C.C brackets, 32 mm, alkathene /PVC telescopic flush pipe about 2 mtrs. long with one brass coupling and clamps, GI chain and pull including supplying and fixing a pair of vitreous white glazed earthen were footrest to be fixed in floor, 15 mm .CI body brass spindle, stop cock of weight not less than 50 grams, 15 mm. PVC connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (510mm.long with 12.5 Liter low level PVC System).

SEPTIC TANK and SOAK PIT

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50 m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of E/I.

Providing designation 75A one Brick flat soling, joints filled with local sand including cost of watering, tax, royalty all complete as per building specification and direction of E/I.

Providing P.C.C M150 with nominal mix of (1:2:4) in foundation with approved stone chips 20mm to 6mm size well graded and clean course sand of FM-2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, Vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing water proof cement plaster (1:3) with clean course sand of F.M- 1.5mm with 5% cico or any other approved water proofing compound including taxes and royalty all complete as per building specification and directions of E/I.

(a) 19 mm thick

(b) 12 mm thick

Providing designation 75A bricks work in C.M. in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints, cost of screening materials racking out joints to 15 mm. depth, curing taxes and royalty all complete as per building specification and direction of E/I.

(a) B/W in C.M (1:4)

(b) B/W 75-B in (1:6) for Soak pit

(c) Brick work in dry masonry for soak pit.

Providing pre cast R.C.C. M-150 with nominal mix of (1:2:4) slab of desired size with approved quality of stone chips and clean coarse sand of FM 2.5 to 3 including curing, shuttering, carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement), taxes and royalty etc. all complete as per building specification and direction of E/I.

Providing for reinforcement as per approved design and drawing excluding carriage of tor rod to work site including cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per Specification and direction of E/I.

10 mm dia

Supplying fitting and fixing H.C.I. Pipe/ H.C.I. fitting of Approved make confirming to I.S.S 1729 including supplying nails and bobbins lead and yarn from making lead caulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of E/I.

(a) 100mm dia H.C.I. Tee.

(b) 100mm dia H.C.I. Band

(c) 50mm dia H.C.I. Cowel

(d) 50mm dia H.C.I. Vent pipe

(e) 100mm H.C.I. Pipe

Supplying materials and labours and fixing 20mm dia M.S bar steps in wall of 0.3 m interval and staggered in (1:2:4) cement concrete including scaffolding and curing etc. all complete as per specification and direction of E/I.

Supplying all materials, labours, tools and tackles and 100mm dia R.C.C hume pipe and laying jointing, testing, earth work including carriage of materials etc. all complete.

Supplying 50mm size brick bats and filling in soak pit including carriage and labours etc. all complete as per direction of E/I.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750mm deep, 600x450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475 mm G.I. Cover With frame ( Weight not less than 36 Kg.) along with earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I

Carriages of materials

(a) Brick –6 KM lead

(b) Sand -36 KM lead

(c) Stone chips -11 KM lead

(d) Steel 10 KM

(d) Cement- 10 KM lead

Electrical Works

Point wiring in PVC conduit with modular type switch wiring for light point /fan point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for twin control light point with 1.5 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit with two way modular switch modular plate, suitable G.I. box and the point with sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light /power plug point with 2 x 4 sqmm F.R. PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with one no 4 sqmm FR PVC insulated copper conductor single core cable for loop earthing etc as required

Copper sub main wiring in PVC conduit Wiring for sub main wiring with PVC insulated copper conductor single core in surface/recessed PVC conduit as required

2 x 1.5 sqmm + 1 x 1.5 sqmm earth wiring

2 x 2.5 sqmm + 1 x 2.5 sqmm earth wiring

Supplying and fixing following way three pole and neutral sheet MCB distribution board 415 volts on surface/recessed complete with tinned copper bush bars ,neutral link, earth bar, din bar, detachable gland plate inter connection phosphatised and power painted including earthing etc as required (but with out mcb / rccb / Isolator) (4 +12 ) double door horizontal type

Supplying and fixing 5 amp to 32 amp, rating 240 volts, B series miniature circuit breaker of single poles in existing MCB DB complete with connecting ,testing, and commissioning etc as required

Earthing with G.I. earth pipe 4.5 M long 40mm dia including accessories and providing masonry enclosure with copper plate having locking arrangement and watering pipe etc with charcoal ,salt all complete as per electrical rule

Supplying ,fitting and fixing following sizes of PVC conduct along with accessories in surface / races including cutting the wall and making good the same in case of recessed conduit as required

PVC con 20 mm PVC pipe

PVC con 25 mm PVC pipe

Installation commissioning and testing Ceiling Fan

Carriage of ceiling fan and regulator

Supplying ,fitting and fixing 5 amp ceiling rose on the existing junction

Supplying ,fitting and fixing breas batten/ angle holder including connection etc.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 3 pin 5/6 amp modular type switch, connection, painting etc as required.

Supplying ,fitting and fixing G.I. box with modular plate and cover in front of surface or in recess including providing and fixing 6 pin 5/6 amp and 15/16 amp socket outlet and 15/16 amp modular type switch, connection, painting etc as required.

Supplying and drawing co-axial T.V. cable RG-06 grade 0.7 nn solid copper conductor PE insulated seilded with fine tinned cover braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.

Supplying and fixing modular switch / socket on the existing modular plate and switch box including connection but excluding modular plate etc,as required. TV antenna socket out put

Supplying ,fitting and fixing modular base and cover plate on existing modular metal boxes etc as required.

Cost of Earthing with G.I. earth pipe 4.5 M long 40mm dia G.I.Pipe 600mm x 600mm x 6mm thick copper earth plate, and 8 SWG copper wire including cost of making 1.2x1.2x3m deep pit and filling with charcoal ,salt all complete as per electrical rule

Compound Wall/ Boundry Wall. (1649.60 M Long)

Doing Geotechnical survey, Collecting field data, designing, getting it approved by competent authority Construction of Compound wall. etc. all complete job.(Please refer to Section 5,Sl. 2.9 of SBD)

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing centering & shuttering etc

Providing RCC M-200 with nominal mix of (1:1.5:3) in stiffeners with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing centering & shuttering etc

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing centering & shuttering etc

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at lintel level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing centering & shuttering etc

Providing designation 75 A brick work in CM (1:6) in super structure with approved quality of clean coarse sand of FM 2 to 2.5 including, providing 10mm thick mortar joints cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of FM 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direction of E/I.

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification & direction of E/I. Qnty. Same as Item no.13

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Stone/Stone Chips 11 KM lead

Bricks 6 KM lead

Gate - 14 nos.

Earth work in excavation in foundation trenches in hard soil (Vide classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I

Providing coarse clean sand in filling in fundation trenches or in plinth including ramming and watering in layers not exceeding 15mm thick with all leads and lifts includiing cost of all materials, labour, royality and taxes all complete as per building specification and direction of E/I.

Providing designation of 75A one brick flat soling, joints filled with local sand including cost of watering, taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing R.C.C M - 200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone chips (20mm to 6mm size) clean course sand of F.M 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing centering & shuttering etc

Providing RCC M-200 with nominal mix of (1:1.5:3) in column with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I.

Providing centering & shuttering etc

Providing RCC M-200 with nominal mix of (1:1.5:3) in band at plinth level with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including curing, shuttering carrying the slab manually to site and laying in position all complete (but excluding the cost of reinforcement) taxes and royalty, all complete as per building specification and direction of E/I. Top of Wall

Providing centering & shuttering etc

Providing Tor steel reinforcement of 10 mm ,12 mm , &16 mm dia Bars as per approved design and drawing excluding carriage of M.S bars to work site , cutting ,bending and binding with annealed wire with cost of wire ,removal of rust , Placing the rods in position all complete as per building specification and direction of E/I

Filling in foundation trenches and plinth in layers not exceeding dressed with earth obtained from excavation of foundation trenches with a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I

Supplying fitting & Fixing M.S. grill gate with M.S. grills made 20x6mm M.S. flat or 16mm M.S. square bars fitted 25x25x6 mm M.S. angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work , taxes all complete as per drawing specification and direction of E/I.

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface

Carriage of materials from divisional store or kiln site or quarry site to work site including contractor's profit, loading, unloading, transportation etc. all complete .

Cement 25 KM lead

Steel 25 KM lead

Sand 10 KM lead

Stone/Stone Chips 10 KM lead

Bricks 15 KM lead

RCC Riser for Rising Main

E/W in excavation in foundation trenches in ordinary soil (vide classification of soil item a) & disposal of excavated earth as obtained to a distance upto 50 M including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs, all complete as per approved design, building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lift including cost of all materials, labour, royalty and taxes all complete as per building specification & direction of E/I. (mode of measurement compacted volume)

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing P.C.C.M - 100 with nominal mix of (1:3:6) in foundation with approved quality of stone metal grade -III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in water &placing in position, vibrating, striking, curring taxes & royalty all complete as per building specification & direction of E/I.

Providing RCC M - 200 with nominal mix of (1:1:5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 tp 3 excluding screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curring (but excluding the cost of reinforement), taxes & royalty all complete as per building specification & direction of E/I.

Providing centering & shuttering etc

Providing R.C.C.M - 200 with nominal mix of (1:1:5:3) in cloumns withapproved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M .5 to 3 excluding shuttering screening mixing cement concrete in mixer and placing in position vibrating striking, curing, taxes & royalty all complete as per building specification & direction of E/I.

Providing centering & shuttering etc

Providing Tor steel reinforcement of 10 mm, 12 mm & 16 mm dia bars as per approved design & drawing excluding carriage of M.S bars to work site, cutting, bending and binding with anealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M 1.5 including screening, curingwith all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Carriage of materials from divisional store or kiln site or quarry site to work site including contract profit, loading, unloading, transportation, etc. all complete .

Cement 10 KM lead

Steel 10 KM lead

Sand 36 KM lead

Bricks 6 KM lead

Stone/Stone Chips 11 KM lead

Road Crossing

Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including all taxes (Central and local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores / site, unloading, stacking, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).

Road Crossing (8mm thick)

250 mm casing for 100 mm pipe

300 mm casing for 150 mm pipe

400 mm casing for 200 mm pipe

450 mm casing for 250 mm pipe

550 mm casing for 300 mm pipe

650 mm casing for 350 mm pipe

Providing and applying primer and one coat of red oxide of iron paint, externally, including cleaning the surface of the pipes with steel scrappers, wire brushes, and metal cleaning solution, etc.

TRENCHLESS: Installation of product pipe by manual guided anger boaring method including making of entry like excavation, shoering / strutling etcfrom the jacking pit and restoration of size after project completion as per instruction of Engineerin In-charge , all complete except the cost of the pipe. Average core of 1.5 M DEPTH BELOW gl(upto 100 M installation)

Above 600 to 900 mm dia

For upto 300 mm dia

For 300 mm to 450 mm dia

For 450 mm to 600 mm dia

Coffer Dam

Providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling the middle portion with B.C. soil (in gunny bags if required). Providing impervious / semimpervious materials on both side of B.C. soil (in gunny bags if required) including ramming , compacting to satisfaction of Engineer-in-charge, till the completion of work including dismantling coffer dam after completion of works and disposing off material as directed by the Engineer-in-charge.

a) For Gangway

b) For Intake Well

Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge ( including cost of machinery , labour, fuel etc Complete)

a) For Gangway

b) For Intake Well

House Connection for 16926 nos Consumer. (Doing household survey, Collecting household data, Getting it approved by competent authority before execution.)

Earth work in excavation ( as per I.S. 3114/1965 for laying of different types and sizes of pipes so as to give 1 m av. cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of E/l. (For soil item B)

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).

Provinding P.C.C M-150 with in norminal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M 2.5 to 3 including , screening , shuttering, mixing cement concrete in mixture and placing in position vibrating striking curing taxes and royality all complete as per building specifiaction and direction of E/I

Earth work in back fillingthe trenches after laying of different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.(For soil item A & B)

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and supplying blue MDPE pipes confirming to ISO 4427:1996 manufactured from vergin resin PE 80 food grade compounded raw material having blue colour only assurance certificate from quality agencies like WRC / CIPET ( India) / DVGM / KIWA / SPGN etc. for usage in drinking water with quality system. The cost shall including cost all taxes, inspection charges transprotaion to work site and earth work involved , all complete job as per specification and direction of E/I. 20 mm dia pipe.

Providing and supplying G.I. pipes (Tata and equivalent make) for usage in drinking water with quality system, The cost shall include testing of all materials all taxes central , State , Municipal, Inspection charges transportation up to site transite insurance, loading, unloading, stacking etc. complete as specified and directed.

Lowering laying and jointing HDPE / MDPE pipe in proper position including all specials by Compression fitting / Electrofusion and But fusion jointing procedure including hydraulic testing as er relevent IS Code complete with all materials for jointing procedure like Electrofusion machine ,Electric mirrior/heater/But fusion welding machine with hydraulic testing and all labours as directed by engineer in charge as per IS-7634 part II

Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost).

Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dia ferrule weight not less than 425 gram

Providing and fixing gun metal full way valve of approved quality all complete as per specification and direction of E/ (a) 20 mm dia and weight not less than 400 gram.

Providing and fixing 15 mm Dia male ended C.I Body Brass Spindle valve and seat bib cock of approved quality (Wt.not Less than 400 gms.) with extra socket all complete as per specification and Direction of E/I.

Supplying and fixing G.I. fittings of Approved make all complete as per specification and Direction of E/I

Elbow 20 mm

Elbow 15 mm

Reducing Socket 20 mm

Nipple 20 mm

Nipple 15 mm

Union Socket 20 mm

Socket 15mm

Socket 20 mm

Carriage of materials

Operation & Maintenance for two years

O/M work with Labour component & Materials for 1st Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 2nd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 3rd Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 4th Year

As per SBD Section - 5 Clouse 9.10

O/M work with Labour component & Materials for 5th Year

As per SBD Section - 5 Clouse 9.10

Labour Cess @ 1%

Aditya Arav Dev-Cons Co. Pvt. Ltd.