DDN/ALTN IN CCL( CARDIAC CATHE LAB) AND PROVN OF LEAD LINED DOORS( QTY-02) FOR RADIOGRAPHY ROOM OF RADIOLOGY DEPARTMENT AT 7 AFH KANPUR CANTT

Amount

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and as directed .

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed .

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed .

M&L Brickwork with subclass ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L for RCC Type A-1, 1:1.5:3 nominal mix (using 20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

M&L for Providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 7.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L Formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and openingcomplete all as specified.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth complete all as specified and as directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth complete all as specified and as directed .

M & L for Preparing & priming of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of wall & applying two coats of Oil bond distemper paint over a coat of primer complete all as specified and directed.

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed by the Engr-in-Charge.

M&L for cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) 25 mm thick as in floor finish complete all as specified and as directed .

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. over and incl screed bed 15 mm thick in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match to match complete all as specified.

M&L for coloured ceramic tiles in vertical surface as in walls, dado, etc. 450x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection complete all as specified and as directed.

Supply and fixing powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm mm thick, fixed all round of grill with stainless steel screws as directed : Make : Deco Cat Part No 104 or Equivalent.

S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old window/ventilator and making good of wall surface to match with existing surface complete all as specified and directed Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), inimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 150 mm long Aluminium anodised handles of fabricated type complete all as specified and as directed by Engr-in-Charge.

S & F Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engr-in-Charge.

S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed and compete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

S & F 03 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each pane and complete all as specified and directed.

S & F for mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

M & L cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

S&F Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed by Engr-in-Charge.Make : Jaguar/Hindware /Parryware/Prayag/Cera

S & F 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed by Engr-in-Charge.

S & F PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrulecomplete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

S & F brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

M & L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 75 mm dia bore of pipe complete

S & F PVC (SWR) soil waste & vent pipe in any length without ears laid in floors, trenches or fixed to wall complete for 110 mm dia bore of pipe complete

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 75 mm dia pipe.

S & F PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed for 110 mm dia pipe.

S & F 110 mm dia PVC (SWR) vent cowl complete.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engr-in-Charge.

Removing excavated material n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

S&F vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S& F 4 mm thick 'E board (classic) in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed ..

Material & Labour for providing and fixing stainlesssteel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/grab bars etc with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.in required size,shape on walls or on the top of floor or the side of waist slab with suitable arrangement complete all as spfd and directed

S&F padestal for Wash basin, vitreous China requisite size complete all as specified and directed by engr- in charge .

S & F toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S & F 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

S&F Jet spray (L-Band) with 1 mtr expandable tube & hook complete all as specified and directed.

S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device complete all as specified and directed.

M&L for point wiring (concealed) for one light /fan point controlled by one switch in and including rigid non-metallic PVC medium grade conduit 20mm dia size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm OVC insulated unsheathed FRLS multi stranded copper conductor cable with flush type metal boxes modular type suitable for fixing modular switches, sockets fan regulator etc. with white colour cover plate with brass screw and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specified complete all as specified and as directed. Note :- (i) Rates shall be deemed to be including to be including mounting concealed boxes and modular cover plated of suitable module. (ii) Necessary PVC rigid junction boxes for identifying junctions as required on site and as directed by Engr-in-Charge for point wiring work with PVC dummy plates shall be deemed to be included in the quoted rate. (iii) Same size wire shall be used for phase, neutral & earth conductors. (iv) The wiring shall be done strictly by following proper colour code, using red, yellow & blue for phase, block for neutral and green for earth.

All as per Ser No 61 above but for one 5/6 Amp socket on the same board with other switch

All as per Ser No 61 above but for one 5/6 Amp socket on independent board.

All as per Ser No 61 but one 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm

S & F of ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S & F in fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as directed.

S & F of modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F of modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F of modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed

S & F of modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

Supply and fixing Exhaust fan AC single phase 230/240V of size 300 mm in sweep , metallic body complete with all accessories including making connection by using three core flexible wire of size 0.50 sqmm and making holes, groting nut bolts in wall for exhaust fan all as specified and as directed.

M&L for sub main wiring with Two runs of single core 4 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC conduit concealled with all necessary fittings and accessories and 01xrun of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through conduit and connected to the terminal and common earth dolly all as specified and directed. (Note. Two run of cable and one run of PVC conduit concealled and one run of earth continuity wire shall be measured as one run complete all as specified.)

Supply and fix SP&N DBs, double door, 240 volt, 4 way complete all as specified and directed.

S&F in Isolator SPN , 63 Amp , 240 Volt complete

S&F in MCB SP upto 32 Amp ,240 Volt complete

Supply & fixing of lead lining doors along with lead lining sheet 1.2 mm with board , ply, mica pasting, bearing butt hinges ,hydraulic door closer, sliding door bolt,tower bolt including material and installation charges complete all as specified and as directed.( Appx size:- 1.20mtr x 2.10Mtr)

M.M.V. CONSTRUCTIONS (BID ID -3121374)

SHRI SHAYAM KRIPA (BID ID -3125649)