SPECIAL REPAIRS TO CONVERSION OF LT OH LINE INTO UG CABLE WITH CONNECTED ITEMS FOR BDE HQ AND PROVN OF 6 NOS TOILETS NEAR OLD BDE CAMP LOCATION AT MIL STN LEKHAPANI

Amount

Surface Excavation not exceeding 30 cm deepand averaging 15 cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed.

Excavating over area n exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over area n exc 1.5m deep but n. exc 3 mtrs and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundations,laying cables,pipe lines, etc n. exc 10 sqm on plan & n. exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Excavating in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundations,laying cables,pipe lines,etc etc n. exc 10 sqm on plan & n. exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM 1:4,complete all as specified and as directed.

M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:6 complete all as specified and as directed..

M&L for loose filling with broken brick aggregates of gauge 80 to 150mm in soakage pit, soak well etc complete all as specified and directed

M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and as directed.

M&L RCC (1:2:4) type B-1,(using 20 mm graded stone aggregate ) as in lintels etc, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets including necessary formwork complete all as specified and as directed.

M&L RCC (1:1.5:3) type A-1 (using 20 mm graded stone aggregate) as in as in slab of septic tank, soak well etc supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves andthe like etc complete all as specified and directed.

M&L RCC (1:1 1/2:3) type A-1,(using 20 mm graded stone aggregate) as in as cover slab for manholes, etc and set in cement mortar (1:4) with plain fair faces incl chamfered, weathering, throating etc incl necessary use and waste of form work complete all as specified and directed.

M&L for Providing RCC (1:1 1/2:3) type A-1, (using 20 mm graded stone aggregate) as in foundations, including rafts, footings,foundation beams,plinth beams; comlpete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of formwork with rough finished flat concrete faces as soffits of suspended slab such as roof slabs, floor slabs, landing and similar work complete all as specified and as directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Item No.19 above but, 6 to 10 mm dia as in stirrups complete all as specified and as directed. .

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

S& F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

S&F for Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.

S&F Steel ventilators fixed type complete with glazing bars dovtailed or welded,etc complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F 3mm thick pinheaded/sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 100 mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed to PVC door complete all as specified and as directed.

S&F 150 mm size aluminium handles, cast type, anodized and fixed complete all as specified and as directed.

M&L for Pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed

M&L for Glazed coloured ceramic tiles of size 300 x 450 x 6 to 07 mm thick, as in vertical surfaces such as skirting,dado,etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and as directed.

M&L for Coloured non skid joint free ceramic tiles of size 300 x 300 mm,7mm to 8mm thick m as in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and as directed.

M& L 75 mm thick PCC ( 1:4:8 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.

M&L 50 mm thick PCC (1:3:6) type C-1, (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic filing in proportion of bitumen and sand 1:2 completed as specified and directed.

M & L 50 mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement,complete all as specified and as directed.

M&L for Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finished fair and even complete all as specified and directed.

M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L Preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F GI tubing,15 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floor wih & incl cutting and chasing brick/RCC wall complete all as specified and as directed.

S&F GI tubing,20 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 20 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings laid in trenches complete all as specified and as directed.

S&F 20 mm dia gun metal globe/gate valve with iron wheel head,screwed both ends,ISI marked complete all as specified and directed.

M&L Cutting existing steel tubing 20 mm bore for alterations or additions (each cut measured),etc complete all as specified and directed.

M&L Screwing existing steel tubing 20 mm bore for alterations or additions or lengthening screw on pipe to from connection,etc complete all as specified and directed.

S&F Fancy type15 mm dia Bib taps cast copper alloy Long Body, chromium plated screwed down to iron pipe or for brass ferrule and as fixed in repairs complete all as specified and directed.

S&F Fancy type15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and as fixed in repairs complete all as specified and as directed.

S&F Vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding with and including PVC heavy duty 110 mm dia P/S trap complete all as specified and as directed.

S&F Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall as complete all as specified and as directed.

S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm as complete all as specified and directed.

S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete all as specified and as directed.

S&F 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and as complete all as specified and as directed.

M&L PCC (1:3:6 ) type C-2 (using 40 mm graded stone aggregate), as in bed to drain pipes of 160 mm bore incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

S&F PVC (SWR) pipes 160 mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls as fixed in repairs complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm dia any radius as fixed in repairs all as specified and directed.

S&F PVC (SWR) bends 75 mm dia any radius as in repair all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm fore fixed with pipe complete all as specified and as directed.

M&L 75 mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement as complete all as specified and directed.

S&F 32 mm waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) as fixed in repairs complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks of 1000 LTR capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I and as directed.

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) as fixed in repairs complete all as specified and as directed.

M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor two single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for each continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light/fan point controlled by one one way switch complete all as specified and directed by Engineer-in-Charge Note :- PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade of the painted surface are deemed to be included in the quoted rate.

S&F Switch piano flush type, 6 amps, 230V AC,single pole, one way all as specified and directed.

S&F Ceiling rose surface type bakelite 65x50mm three terminal all as specified and directed.

S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : LED Batten - Crompton Cat part No IG16LT8-16 or equivalent in philips/Wipro, Tube rod - Crompton Cat part No LTT8-20 or equivalent model in philips/wipro/Surya/Havells.

S&F LED bldg security light fitting 25W watt with 230 Volts with IP 66 protection, High Impact resistance complete with mounting bracket,02 x MS Flat size 40x3 mm clamp set, nut/bolt/washers etc all accessories internally pre-wired and fixed to walls complete all as specified and directed. Make : Crompton Cat part No LSTS-25-CDL-M or techno-commercially equivalent model in Philips/Wipro/Surya/Havells

S&F Pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts including grouting in wall and connecting complete for 4 way complete all as specified and directed. Make:Schneider/Legrand/L&T.

S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire complete all as specified and directed. Make:Schneider/Legrand/HPL.

S&F MCB SP 6 to 32 Amps, 230 volts AC and connecting using suitable size of wire complete all as specified and directed. Make:Schneider/Legrand/HPL.

S &F XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with glanded aluminium conductor of cross sectional area 16 sqmm 2 core as passing through pipe/wall/floor/trenchesall as specified and as directed.

Supply and laying, jointing, testing and commisioning LT XLPE insulated cable, overall PVC insulated, PVC sheathed armoured LT 1100 volt grades 120 Sqmm 3.5 core heavy duty with aluminium stranded conductor drawn through pipes/laid in induct/ trenches/ fixed on poles, etc complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable complete all as specified and directed. Note: Punned thickness shall be measured for payment.

M&L Brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply and laying GI pipe, 50 mm bore, (light Grade) in trenches/under floors or roads or along the pole incl clamp with suitable nuts and bolts,etc for protection of cables complete all as specified and directed.

Supply and laying GI pipe, 40 mm bore, (light Grade) in trenches/under floors or roads or along the pole incl clamp with suitable nuts and bolts,etc for protection of cables complete all as specified and directed.

Supply, install, testing and commissioning of outdoor type distribution board, pedestal and compartmental type suitable size, top canopy, enclosures cubical, weather and vermin proof totally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50 HZ double door with front openable including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete incl suitable size panel mounting MS angle base frame duly painted with synthetic enamel black paint over a coat of red oxide primer complete all as specified and directed by Eng-in-charge. Note:- The cost of the mounting of panel on MS Angle or PCC pedestal (foundation) required as per site is deemed to be included in the quoted rate of the item. The panel will comprise of the following:- INCOMING :- (i) MCCB 160 Amps FP, 415 Volt 16 KA fixed thermal magnetic release-01 No. (ii) Phase indicating lamp LED type – 1 Set of three. (iii) Aluminium bus bar 300 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos. OUT GOING :- (i) MCCB 100 Amp, FP, 415 Volt,10 KA, -02 No (ii) MCCB 63 Amp, FP, 415 Volt,10 KA, -01 No (iii) Multi-function meter - 01 No with suitable CTs complete.

Supply, install, testing and commissioning of outdoor type distribution board, pedestal and compartmental type size 600x600x300mm, top canopy, enclosures cubical, weather and vermin proof totally enclosed made out of 3.15 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50 HZ double door with front openable including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete incl suitable size panel mounting MS angle base frame duly painted with synthetic enamel black paint over a coat of red oxide primer complete all as specified and directed by Eng-in-charge.. The cost of the mounting of panel on MS angle or PCC pedestal (foundation) required as per site is deemed to be included in the quoted rate of the item. The panel will comprise of the following:- (i) Onload change over switch 4 pole 100 Amps, 415Volts, AC 50 Hz - 01 Nos

M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate and 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel and wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.

S&F Voltage stabilizer 4 KVA capacity for automatic operation, singly phase naturally air cooled indoor type and designed for input variation between 150V-280V with outur voltage stabilizer at single phase sine wave 210V-250V conforming to IS 8448,complete all as directed by Eng-in-charge. Make: V-Guard, ITE Gurgaon Powerware.

M/s PRABIR ENTERPRISE

M/S S. P. ENTERPRISE

M/s HALDER ENTERPRISE