Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.7 Craccepted-aoc | ₹1.7 Cr | accepted-aoc |
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
5 Feb 2026, 9:30 pmClosed
Public Works Department
EE PWD DHARWAD
08362747749
Improvement and Widening road works to NH to Lokur via Narendra Mangalgatti MDR From km 6.00 to km 10.00 in Selected reaches of Dharwad taluk.
PWD/2025-26/RD/WORK_INDENT32117
PWD/2025-26/RD/WORK_INDENT32117
Open
Roads
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
7 documents required · 7 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
Work Done Certificates obtained from the Competent Authorities
The Tenderer should be a PWD Registered Class III & Above contractor
To qualify for award of this contract each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 Satisfactorily completed at least 50 Percent of the contract value as prime contractor at least one similar work such as Improvements to Asphalt Road works of value not less than Rs.80.33 Lakhs
3.3) Each Tenderer should further demonstrate: (a) As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification.1) Excavator like JCB/Hitachi etc , 2)Tippers / Trucks, 3)Road Roller (vibrator) , 4)PRR Roller, 5)Hot mix with plant (minimum capacity of 40/60 TPH), 6)Paver finisher, 7)Vehicle Mounted (tank) Mechanical sprayer, 8)Pug Mill (suitable Capacity).
Liquid assets and or availability of credit facilities of not less than Rs.80.33 Lakhs Credit lines or letter of credit or certificates from the banks for meeting the fund requirement etc. LOC or Letter of Credit should be in prescribed format as per KW-4 Bid Document. if not attached then the tender will not be accepted
To qualify for the award of this contract each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 executed in any one year the following minimum quantities of work Earthwork excavation/ Embankment/Subgrade - 1033.60, 2)WMM/WBM - 488.40 Cum, 3) Asphalt work(inculding BM/DBM/BC/SDBC)/MSS - 1233.00 Cum
Contact details of contractor Should mention valid Email ID, communication Address, Phone Number
BID Capacity AxNx1.5-B
As per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted.
Total value of civil engineering construction works executed and payments received in the last five years 2020-21, 2021-22, 2022-23 , 2023-24 & 2024-25 a Achieved in at least Two Financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 321.32 Lakhs. with UDIN number
Annual Turnover Certificate along with profit and Loss account statements ITR Returns UDIN is preffered in Turnover Certificate. From 2020-21 to 2024-25
₹4,020
₹2.4 L
5 Feb 2026
17 Jan 2026
6 Feb 2026
4 Feb 2026
4 Feb 2026
FOR TENDERS upto RS.200.00 LAKHS -876.11
Tender amount 16065074.21 160.66 For Milestone 1: 4819.52 Rs. per day
EMD 1.5% 240976.11 240100 For Milestone 2: 4819.52 Rs. per day
Completion period 6.00 100000 For Milestone 3: 6426.03 Rs. per day
Annual turnover 321.32 140100
Similar nature work 80.33 0.00
LOC Liquidity assets 80.33
Estimated quantities 80%quantities
Total Quantity 80% Quantity
Order Item Details Floor/Lift No. Base Rate Final Rate (Excluding GST) Quantity Net Amount (Excluding GST) Actions 80% 15%
1 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 5 5 3750 18750 3000 0.12 E/W 1033.60
Item Code : 3.4.ii 0 0.00
Item Description : Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator. Ref to MoRT&H : IRC - 305.4.3 0 0.00 WMM 488.40
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
2 Category : Vol - 3 -Chapter -3- EARTH WORK, EROSION CONTROL AND DRAINAGE --- 493 493 1292 636956 1033.6 3.96
Item Code : 3.6 0 0.00
Item Description : Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 0 0.00 Asphalt work(inculding BM/DBM/BC/SDBC)/MSS 1233.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
3 Category : Vol - 3 -Chapter -4- SUB-BASES, BASES (NON-BITUMINOUS), SHOULDERS AND STABILIZATION METHODS --- 2559 2559 610.5 1562269.5 488.4 9.72
Item Code : 4.17 0 0.00
Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
4 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 41 41 4070 166870 3256 1.04
Item Code : 5.1.A.i 0 0.00
Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
5 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 15 15 4070 61050 3256 0.38
Item Code : 5.33 0 0.00
Item Description : Tack coat on Granular surface treated with primer - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. Ref to MoRT&H : IRC - 503 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
6 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 12 12 15525 186300 12420 1.16
Item Code : 5.32 0 0.00
Item Description : Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Ref to MoRT&H : IRC - 503 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
7 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 7661 7661 949.19 7271744.59 759.352 45.26
Item Code : 5.8.ii.C 0 0.00
Item Description : Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Ref to MoRT&H : IRC - 504 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
8 Category : Vol - 3 -Chapter -5- BASES AND SURFACE COURSES (BITUMINOUS) --- 10152 10152 592.06 6010593.12 473.648 37.41
Item Code : 5.31 0 0.00
Item Description : Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. Ref to MoRT&H : IRC - IRC-37:2018 0 0.00
Unit : m³ 0 0.00
Rate Analaysis Performed ?: No 0 0.00
9 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 530 530 64 33920 51.2 0.21
Item Code : 8.15 0 0.00
Item Description : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No 0 0.00
10 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 3591 3591 8 28728 6.4 0.18
Item Code : 8.6.A.iv 0 0.00
Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. - 60 cm equilateral triangle 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: No 0 0.00
11 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 4336 4336 8 34688 6.4 0.22
Item Code : 8.6.A.viii 0 0.00
Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022. - 60 cm circular. Ref to MoRT&H : IRC - 801 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: No 0 0.00
12 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 2889 2889 6 17334 4.8 0.11
Item Code : 8.16.ii 0 0.00
Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer stone (precast). Ref to MoRT&H : IRC - 805 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: No 0 0.00
13 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 820 820 24 19680 19.2 0.12
Item Code : 8.16.iii 0 0.00
Item Description : Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). Ref to MoRT&H : IRC - 805 0 0.00
Unit : each 0 0.00
Rate Analaysis Performed ?: No 0 0.00
14 Category : Vol - 3 -Chapter -8- TRAFFIC CALMING MEASURES, ROAD SIGNAGES & MARKING (ROAD FURNITURE) --- 8995 8995 1.8 16191 1.44 0.10
Item Code : 8.7 0 0.00
Item Description : Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 m2 fixed over back support frame of min 35 x 35 x 3mm angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. Ref to MoRT&H : IRC - 801 0 0.00
Unit : m² 0 0.00
Rate Analaysis Performed ?: No
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
road specification.pdf
Others - Road Specification • 1.52 MB
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC Format • 1.73 MB
32117.xlsx
Others - Qty format • 0.06 MB
bid document kw-4 wi 32117.docx
Tender Document • 1.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].