WELCOME MAINTENANCE REPAIR TO BRICKS WORKS ROOF LEAKAGE SEEPAGE TILLING JOINERY FLOORING CERTAIN BR AND CERTAIN INTERNAL EM WORKS AT AF STN NARELA UNDER AGE BR AF RAJOKRI AND AGE EM AF RAJOKRI OF GE AF GURGAON

Amount

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified and as directed.

All as per item No- 1 above but on surfaces of ceiling.

All as per item No- 1 above but applying two coats of Cement base paint on walls complete all as specified and directed

Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying One coat of Weather Exterior Emulsion paint complete all as specified and as directed.

M & L for providing 3mm thick wall care putty on wall before applying Oil bound Distemper and making the surface uniform all as specified and directed

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete all as specified and as directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M&L for 40mm thick cement concrete type B-, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth without using extra cement complete all as specified & as directed

Taking down existing unserviceable water proofing treatment from roof slab including plaster and cleaning the roof slab by wire brush and removing the debries and WPT felt beyond the premises of MD land.

M&L for 15 mm thick plaster in CM (1:3) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement after cleaning of roof surfaces with wire brushes complete all as specified and directed . Notes : WPC shall be measured and paid seperately

Supply only Water Proofing Compound

M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete as all specified and as directed

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as spd and directed

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M & L brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick plastering in CM 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair complete all as specified

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as spd & directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of Oil Bound distemper over one coat of primer complete all as specified & directed..

M&L rendering 10mm thick in CM 1:3 as in ceilings finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of Oil Bound distemper over one coat of primer complete all as specified

M&L for 25 mm thick PCC 1 :2 :4 type B-O (Using 12.50mm graded stone aggregate) as in floor complete all as specified & as directed.

M&L Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for bedding of tiles complete all as specified and as directed.

M&L 10 mm thick rendering in CM 1:4 on vertical surfaces for backing of tiles complete all as specifed and directed

M&L for non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement sluury and pointed in white or coloured cement to match complete all as spd and directed

M&L Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 7mm/450x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and directed

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity 3 layers (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed

S&Fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed

S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed

S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Description same as per item No 39 above but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site.

Taking down shutter of any description n.exc 1 Sqm and removing from site.

S&F 105X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

S&F 125X60mm girth pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS Sheet complete all as specified and as directed.

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri/ECOCELL

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified. Make:- Rajshri/ECOCELL

S & F 75 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and as directed

S & F 100 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and as directed

S&F 100 mm size but hinges type C-21 extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, complete all as specified and as directed

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified and as directed

S & F 100 mm size extruded aluminium alloy handles cast type anodised and fixed.

S & F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed.

Dismantling boarding of any description , fixed in any position with nails complete all as specified and as directed.

S&F 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

S&F as in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

Hacking out old broken glass ordinary quality or description from wooden or metal frames glazed with putty or fixed with beads complete all as specified and directed

S&F window or ventilators section of frame 72x55mm fixed to wall or concrete surface with rowl plugs made of galvanised steel powder coated and section of shutter 47x20mm mulion section 72x50mm (Based steel as per IS 513 "D" quality galanised as per IS 277 with zinc of 120 gms/sqm) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made of square bars powder coated fixed to window frame with screws including necessary fittings and all builders hardware such as handles, tower bolts and stays etc complete all as specified and as directed. Make : NCL type-4000 Series Ashish Industries(Note : Glass and wiremesh shall be measured and paid separately under respective items)

S&F galvanised stainless steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed

S&F sheet glass 4mm thick ordinary quality and glazing fixed with including neopune rubber gasket complete all as specified and directed.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&Fixed in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&Fixed in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed

Dismantling posts or struts (wood, steel, or RCC) any section, incl taking out embedded portion and making good disturbed ground posts embedded in concrete brick work masonry etc

Dismantling wrought iron or mild steel work of any description complete all as specified and directed

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, etc., drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and as directed by Engr-in-Charge (each row shall be measured separately)

S&FGalvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc comlete all as specified and as directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and as directed

M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified

M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1 mtr width opening complete all as specified and as directed.

S&F in repair re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

S & F 10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end,each screwed end to be fitted with washers and one hexagonal or square nut but length exc 5CM and n exc 10 CM long all as specified and as directed.

Fixing only chain link fencing including line wire, 10 cms mesh of 10 guage standard, rails, straining bolts etc including provision of binding wire.

Supplying only chain link MS galvanized fencing 10 Cms mesh and 10 guage . Complete all as specified

M & L for Mild Steel round bar 10 dia and over cut to length bent to shape required, including cranking, bending spirally for hooping ends complete all as specified & directed

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified & directed

Supply and fixing 75 mm thick SFRC (1.00X0.50)m manhole cover/drain cover and frame (heavy duty HD-20 Gde designed), total Weight of cover and frame to be not less than 180 Kg etc complete all as specified and as direted

S & F in repair drapery rod 25 mm dia high strength aluminium rod with powder coated paint of thickness 40/60 microne of wood finish and one set of ornamental decoative finish wooden clamps all accessories complete all as specified and directed

Taking down of aluminium frame/doors/windows from site dismantling aluminium structure such as glass, rubber beading aluminium clips complete all as specified & directed

S&F powder coated anodized aluminum frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified & directed.

S & F powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No Tower bolt 100 mm 1 No complete all as specified & directed.

M&L for 5 mm thick sheet glass ordinary quality and glazing each pane fixed with including neopune rubber gasket in aluminium frame work complete all as specified and directed.

S & F 9 mm thick prelaminated particle board exterior grade in bottom panel of Aluminium door including rubber gasket, aluminium glazing clips complete all as specified and directed

S&F fabricated anodized aluminium grill of size 75x100mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and as directed

S & F in repair Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified & directed.

S & F in repair Cast iron body door closer hydraulically regulated, designation No .1 universal type suitable for door shutters upto 851 to 1000 mm in width and of weight 35 kg complete all as specified & directed.

S & F in repair Cast iron body door closer hydraulically regulated, designation No .3 universal type suitable for door shutters upto 701 to 850 mm in width and of weight 36 to 60 kg complete all as specified & directed.

S&F as in repair double action door spring hinges, mild steel with steel wire spring of size 150mm stove enamelled black complete all as specified & directed.

E/M WORKS M&L for point wiring with PVC insulated and unsheathed cable 1.5 Sqmm (nominal area) ISI marked multi-stranded copper conductor single core including 20mm dia medium grade PVC conduit concealed in wall / false ceiling, concealed terminal boxes not less than 1.6 mm thick of required size with top cover 2.8 mm thick of plastic laminated sheet (Hylum) of required colour complete metal flush terminal boxes with all accessories including 1.5 Sq mm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly including colour coding of cable shall be Phase - Red, Neutral- Black and Earth- Green complete all as specified and directed :-

One light/fan point/Exhaust fan point controlled by one way switch 6 amps.

One 5 pin, 5 Amp switch socket out let on the same board with other switches.

One 5 pin, 5 Amp switch socket out let on the independent board.

M&L for point wiring with PVC insulated and unsheathed cable 2.5 Sqmm (Nominal area) stranded copper conductor single core including ISI marked 20 mm dia medium grade PVC conduit for point wiring, concealed in wall /, galvanised steel concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum) of required colour with all accessories including 2.5 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed

S&F ceiling rose, surface backelite 65x50mm two to three terminals complete all as specified and as directed.

S&F switch Piano flush type single pole one way 5 Amp complete all specified and as directed.

S&F switch Piano flush type single pole one way 15 Amp complete all specified and as directed.

S&F socket out let 3/5 pin, 5. Amp piano flush type complete all specified and as directed.

S&F socket out let 6 pin, 5/15 Amp 230 volts piano flush type complete all specified and as directed.

S&F bell push, piano type, single pole complete all specified and as directed.

S&F stepped type electronic fan regulator rotary flush socket type 230 volts complete all as specified and as directed.

S&F electric bell, AC 230 volt, single pole, complete all specified and as directed.

M&L for point wiring with PVC insulated and unsheathed cable 4 Sqmm (Nominal area) stranded copper conductor single core including ISI marked 25 mm dia medium grade PVC conduit for point wiring, concealed in wall /, galvanised steel concealed terminal boxes not less than 1.6 mm thick of required size with top cover 3 mm thick of plastic laminated sheet (Hylum) of required colour with all accessories including 4.0 Sqmm PVC insulated and unsheathed stranded copper wire conductor cable to common earth and connecting to earth dolly for one 5 pin, 15 Amps switch socket out let point on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green complete all as specified and directed

S&F MCB DB Sheet metal enclosure single pole and neutral 240 volt 2 way in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure single pole and neutral 240 volt 8 way with 200 Amp rated Bus bar common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 without MCB and with enclosure blank plates for unused way complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure single pole and neutral 240 volt , double door with 200 Amp rated Bus bar , 12 way, all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 , complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand/Hager

S&F MCB DB sheet enclosure Tripple pole and neutral 440V , double door with 200 Amp rated Bus bar , 6 way, common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete confirming to IP 42/43 , complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/Legrand/Hager

S&F in replacement MCB, single pole, 240 Volts (06 to 32) Amps,10 KA 'B' Curve complete all as specified and directed by Engr-in-charge. Make : L&T/Schneider/ Legrand/Hager

S&F in replacement MCB, single pole & neutral, 240 Volts 25 to 32 Amps,10Ka 'B' Curve complete all as specified and directed by Engr-in-charge. Make : L&T/ Schneider/Legrand /Hager.

S&F in replacement MCB, single pole & neutral, 240 Volts 40 to 63 Amps,10Ka 'B' Curve complete all as specified and directed by Engr-in-charge. Make : L&T/ Schneider/Legrand /Hager.

S&F in replacement Isolator TPN, 100 Amps complete all as specified and directed by Engr-in-charge. Make : L&T/ Schneider/Legrand /Hager.

S&F LED light fitting 1x10 watt surface mounted with accessories connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips /wipro / Crompton.

S&F LED light fitting 1x20 watt surface mounted with accessories connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm complete all as specified and directed by Engr-in-charge. Make : Philips /wipro / Crompton.

M&L for sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire, drawn through PVC surface/ concealed conduit and connected to main board and making good disturbed surface including taking down out old unserviceable sub main wiring and removing deberis to reinstate the premise neat and clean complete all as specified and as directed. Note: (i) Two run each of one RM of 10.00 sqmm cable and 1 run of one RM of 6.00 sqmm cable together shall be considered as 1 running meter for payment purpose. Make of wire - Finolex , Plaza, Havells.

Taking down of MCB DB 2/ 8 way/12way with MCB 's and making good of wall complete all as specified and directed

Taking down of MCB SP / DP / Isolator complete all as specified and directed

Taking down unserviceable aluminium/copper point wiring (light, fan, socket or power) incuding fixtures and fittings such as switcthes, ceiling rose, pendents regulators, sockets etc for taking out of credit and making good complete all as specified and directed

Taking down light fitting any type any watt complete all as specified and directed

Taking down of existing sub main wiring any size complete all as specified and directed

Taking down ceiling fan (C/F of any size/make), cleaning its dust properly oiling and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed

Taking down exhaust fans and re-connecting up including provision of cable from ceiling rose to exhaust fans after cleaning all dust complete all as specified and as directed.

M/S LADPURIA ENTERPRISES