Constructions of new toilets blocks for primary wing and ramp in Model School and Ramp and stage in B.S.L. Sr. Sec. School at B.B.M.B. Colony, Sundernagar.

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:4:8(b) With stone aggregate 40mm gauge(ii) mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:5:10 (b) With stone aggregate 40mm gauge (ii) mixing by mechanical means using concretemixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position (c) Tees angles & channels

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or moldedforged framed window guards, barred iron doors stair case iron railing etc. including cost of bolt sand nuts, screws, welding rod complete fixing inposition

Providing and fixing M.S. round or square bars at required spacing in wooden frames of windows and clearstory windows.

12.5 mm thick cement plaster 1:4

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish Complete.

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Dismantling concrete: Cement concrete plain1:4:8 mix

Cement concrete 1:4:8 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Providing and laying Anti skid Ceramic floor tiles of size 300x300mm 10mm thick of 1st quality conforming to IS: 15622 of approved make in colours such as White ,Ivory,Grey Fume red ,Brown, Laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete white cement slurry in joints including corners angles and beading

Providing and fixing 1st quality ceramic glazed wall tiles /matt/semi matt/glossy /highly glossy finish/ highlighter emboss conforming to IS 15622 ( thicknes to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of size 200x 300 mm, 100x200mm , 200x200mm as approved by engineer in charge in skirting riser of steps and dados over 12mm thick bed of cement mortar 1:4 (1; cemenr 4: fine sand ) and jointing with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigmwnt of matching shade complete.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:4:8 (b) With stone ballast 20 mm gauge ii ) mixing by mechanical means using concrete mixer volumetric type

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure

Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete

12.5 mm thick cement plaster 1:4

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glossy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. on old work one coat to give an even shade

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on over one priming coat to give an even shade

Providing and fixing M.S. angle iron 40*40*6 mm chowkhat including iron hold fasts butt hinges fixed in position finished with red lead non setting primer complete in all respect (a) For single rebate

Supplying openable steel windows, of standard rolled steel Z sections, joints mitered and Electrically flash-welded, with iron fittings including necessary iron handles, Peg-stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing ) and finished with two coats of ready mixed paint red lead non setting primer (a)above 1 sqm area

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area up to 0.50 sqm

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete (a) Brass helical spring

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make (a) Glass panes 3mm or 8.44 kg per sqm upto 0.4 sqm area

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1(1999) (A) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 30mm thick

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work metallic or plastered, concrete surface to give an even shade.

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. b 20mm i/d

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (a) C.P.brass 15mm stop cock Male and female end

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. Brass Bib cock/Stop cock 15mm x 400gm

Providing and fixing in position automatic brass Ball Cock in tanks. (i) 15mm i/d

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (a) Size 600mmx450mm

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm (a) 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect (a) C.P. brass towel Rails size 15mm dia 610mm long

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge)with cover with suitrable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fitting and base support for tank. Triple layer tank.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc.(a) With 100mm x 75mm i/d Floor Trap (weighing 4.0 Kg)

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect (b) 20mm i/d G.I. Union

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as perspecifications.(iv) 110mm o/d pipe of 10 Kgf. / sqcm

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (ii) Size 550 mm x 400 mm x 815 mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing and fixing in position set of EWC and WHB size 46x36 cm for Handicapped person of approved make (to the approval of the Engineer-in-charge) consisting of matching cistern, one pair mounting brackets, seat cover, one no. hinges rail 76cm and 4 no. grab rails 60cm complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect

Providing and fixing PVC Cistern 10 Ltr. Capacity ISI marked IS 7231:1994( size 32.5x47.6x15.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings complete.

RECESSED HDPE PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall 1.5sq. mm, 1100volts grade to be laid in HDPE conduit pipe 20mm/25mm dia. (ISI Marked), recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface) ii) Wiring light point

iv) wiring 6 amp wall socket point

vi) wiring 16/20 amp power plug control point

ERECTION, REPAIR AND REWINDING OF FANS: (A) ERECTION OF FANS: (i) Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:- © Erection of Exhaust fan with louver shutter on the wall/ window grill

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:(A) MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-(ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. (a) Inside size 75x120 cm and 120 cm deep

Bidder Name

Amount in Words

Arun Vishist Govt. Contractor

LEKH RAJ

ATUL CHANDEL

LEKH RAJ

Arun Vishist Govt. Contractor