CA NO GE/C-61/2020-21 REPAIR/REPACEMENT INTERNAL ELECTRIFICATION AND ELECTRICAL FITTINGS FIXTURE AT DK-I DK-II RRRC INCLUDING TRG AREA ICHHAMATI LINE MAINAMATI LINE ARTRAC HUT CC HUT AND ADJOINING AREA UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia) FRLS 1100 Volts in existing PVC concealed conduit incl new M S steel terminal boxes of wall thickness not less than 1.6mm including 3 mm thick laminated top sheet cover including using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for the follwing point controlled by one No one way switch all as specified and directed by Engr-in-Charge.

One light/fan point controlled by one way switch

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board

All as per item No 2 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge..

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia) FRLS 1100 Volts in new PVC concealed conduit in new M S steel terminal boxes of wall thickness not less than 1.6mm including 3 mm thick laminated top sheet cover including using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one follwing point controlled by one No one way switch all as specified and directed by Engr-in-Charge.

One light/ fan point controlled by one way switch

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board

All as per item No 4 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge..

M&L for point wiring with 2 single core PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm and including 1 single core of size 1.5 Sqmm as Earth continuty conductor and PVC casing/caping 20mm dia medium grade and PVC board for mounting switches/socket combination all as directed and specified by Engr-in-Charge :-

One light point or one fan point or bell point controlled by one switch SP, one way, 230 volts.

One 3 pin socket outlet 5 Amps on independent board

One power point with pre insulated unsheathed standerd copper conductor cable & 2.5 sqmm single core (FRLS) and pre unsheathed copper conductor 2.5 sqmm single core on earth wire connected to earth doly complete..

M&L switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified and directed by Engineer in charge.

M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.

M&L Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete all as specified and directed by Engineer in charge.

M&L switch Modular type 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge.

M&L Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

M&L switch piano flush button type single pole one way 6 Amps complete all as specified and directed by Engineer-in-Charge.

M&L bell push single pole 6 Amps complete all as specified and directed by Engineer-in-Charge.

M&L switch piano flush button type single pole 16 Amps complete all as specified and directed by Engineer-in-Charge..

M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directed by Engineer-in-Charge.

M&L socket outlet 6 Amp flush button type complete all as specified and directed by Engineer-in-Charge.

M&L regulator electronic switch type 5 steps suitable for 1200/1400 mm sweep 230 volts complete all as specified and directed by Engineer-in-Charge.

M&L regulator electronic socket type 5 steps suitable for 1200/1400 mm sweep 230 volts complete all as specified and directed by Engineer-in-Charge.

M&L bell electric (dingdong) 230 volt, SP complete all as specified and directed by Engineer-in-Charge.

M&L Buzzer, AC, 230 Volts, single pole, complete all as specified and directed by Engineer-in-Charge.

M/L insulated body, angle holder (metal ring) with back plate ISI marked complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose surface PVC 65x50 mm type with three terminals.

M&L modular stepped type electronic fan regulator 120W, 2 module all as specified and directed by Engineer in charge.

M&L in replacement white cover plate with frame 2 module complete all as specified and directed by Engineer in charge.

M&L in replacement white cover plate with frame 3 module complete all as specified and directed by Engineer in charge.

M&L in replacement white cover plate with frame 6 module complete all as specified and directed by Engineer in charge.

M&L in replacement white cover plate with frame 8 module complete all as specified and directed by Engineer in charge.

M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 10Amps complete with one single pole MCB 'C' series 10 A capacity complete all as specified and directed by Engineer-in-Charge.

All as abovoe itgem No 28 but with single pole MCB 'C' series 20 Amps complete all as specified and directed by Engineer-in-Charge..

Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge. (Mirror light)

Supply and fix in replacement LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts not less than 3200lm with Metallic CRCA powder coated body with high efficiency opal/PMMA diffuser with system efficacy > 80 lm/W, CRI>80, color temperature >5700k, IP 20, Power factor<0.95, THD<10%, 50000 burning hours , Ambient temperature 0 to 500 DegC, Driver should meet IEC complaint for safety, with voltage variation range of 150-270 V and surge protection of 2.5 KV including necessary fixing arrangementsfixed cocomplete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement surface ceiling mounted, LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fix i in replacement 40W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole complete all as specified and directed by Engineer-in-Charge.

S & F electronic driver with high voltage protection upto 380 Volt AC suitable for LED recessed mount 2"x2", 36/40 watt including connecting complete with connected accessories at given site complete all as specified and directed by engr-in-charge. Make:as per sample

S & F electronic driver with high voltage protection upto 380 Volt ACdriver suitable for LED surface mounted 12/15 watt ceiling light including connecting complete with connected accessories at given site complete all as specified and directed by engr-in-charge. Make:as per sample

S & F electronic driver with high voltage protection upto 380 Volt AC suitable for LED building security light, 30 watt including connecting complete with connected accessories at given site complete all as specified and directed by engr-in-charge. Make:as per sample

Supply and fix in replacement MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix in replacement MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCCB 100 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'C' curve ccomplete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCB SPN 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair MCB SP 6-32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed by Engineer-in-Charge.

S & F exhaust fan 230 mm in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site complete all as specified and directed by Engineer-in-Charge.

S & F exhaust fan 300 mm in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site complete all as specified and directed by Engineer-in-Charge..

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Ventilating Fan 200 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing conduit/ surface on walls complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4 sqmm cable shall be measured as one RM.

Supply and fix in repair Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing conduit in walls complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 10 sqmm cable shall be measured as one RM.

Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing conduit in walls complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 6 sqmm cable shall be measured as one RM.

S & F PVC Gang box surface type heavy duty suitable for single switch 5 Amps complete all as specified and directed by Engineer-in-Charge.

S & F PVC Gang box surface type heavy duty suitable for single 5 Amps switch & socket complete all as specified and directed by Engineer-in-Charge.

S & F Gang box surface type heavy duty suitasble for 15 Amps switch and socket complete all as specified and directed by Engineer-in-Charge.

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits, all as specified and directed by Engr-in-Charge.

M & L in replacement for only single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

M & L in replacement for only single core PVC insulated cable 4 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

M & L in replacement for only single core PVC insulated cable 10 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge.

M&L in replacement copper cable flexible 2 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge. Note : Each Roll consist of 90 RM

M&L in replacement copper cable flexible 3 core PVC insulated of size 40/.0076 ll as specified and directed by Engr-in-Charge. Note : Each Roll consist of 90 RM

S & F in replacement copper wire 1.5 Sqmm all as specified and directed by Engr-in-Charge. . Note : Each Roll consist of 90 RM

S & F in replacement copper wire 2.5 Sqmm all as specified and directed by Engr-in-Charge. . Note : Each Roll consist of 90 RM

S & F in replacement copper wire 4 Sqmm all as specified and directed by Engr-in-Charge. Note : Each Roll consist of 90 RM

M & L in replacement for only twin core PVC insulated unarmoured cable 10 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor complete all as specified and directed by Engr-in-Charge.

M & L in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor complete all as specified and directed by Engr-in-Charge.

S & F hole fastner madeup of MS 6" long with complete nut bolt complete all as specified and directed by Engineer-in-Charge. Make:as per sample

S & F hole fastner madeup of MS 4" long with complete nut bolt all as specified.Make:as per sample

S&F in replacement GI Pipe bracket bent to shape drilled welded made out of light grade GI pipe 32/40mm dia 1.5 mtr long and fixing on the wall where as directed by the Engr-in-Charge for fixing of building security light fitting including MS clamps, nuts, bolts and washers complete all as specified by the Engr-in-Charge . Make:As per sample

Refixing of Ceiling fan / exhaust fan/ fresh air/ Wall mounted fan after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only.

Refixing carefully geysers 25/50 ltrs capacity opening for inspection reassembling in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only complete all as specified and directed by Engineer-in-Charge..

Taking down carefully old unserviceable heating element, thermostat, connection pipe, NRV, Pressure valve plug top and socket from geyger of any storage capacity and make complete all as specified and directed by Engineer-in-Charge.

M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Testing of the ceiling fan to the entire satisfaction of Engr-in-Charge.

All as per item No 77 above but 1400mm sweep complete. Testing of the ceiling fan to the entire satisfaction of Engr-in-Charge.

M&L for opening up the winding of Exhaust fan 225/300 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Testing of the ceiling fan to the entire satisfaction of Engr-in-Charge.

M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L in replacement for painting of exhaust fans complete, in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc ccomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement as per existing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement Ceiling fan blade suitable for 1400mm sweep of any make with suitable size as per site requirement as per existing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement exhaust fan Metal blade suitable for 225/300mm sweep of any make with suitable size of split pin as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement PVC canopy upper and lower of celing fan of any make & size complete with nuts, bolts & washers as per existing sample approved .

Taking down old unserviceable down rod and supply and fix 60 cm long down rod duly made out off Mild steel including taking down & refixing of existing ceiling fan of any sweep and make and making connection from ceiling rose to PVC connector complete all as specified and directed by Engineer-in-Charge.

S&F in replacement capacitor of 2.5 MFD, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement capacitor 3.15 MFDcomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing ball bearing No. 6202, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing ball bearing No. 6203, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing gun metal bush of any size and make sutiable for ceiling fans 1200/1400 mm compete all as specified and directed.

Supply & fixing worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed.

M & L non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.

S&F SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and directed by Engineer-in-Charge.

S&F SS braided pipe of 12 mm ((internal) suitable for hot/cold water, 600 mm long with brass nuts and rubber washers complete all as specified and directed by Engineer-in-Charge.

S&F heating element of 2 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge.

S&F heating element of 2 KW circular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge.

S&F heating element of 1.5 KW triangular type with nut bolt washer complete all as specified and directed by Engineer-in-Charge.

S&F of thermostat for 25/50 ltrs capacity of geysers complete all as specified and directed by Engineer-in-Charge.

M & L neon lamp/indicator lamp for geysers complete all as specified and directed by Engineer-in-Charge.

M&L for soldering and brazing inner copper tank 25/50 ltrs with brass solder and refixing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement inner copper tank for geysers of capacity 25/35 ltr as per existing of approved make ccomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement outer body/cover suitable for 25 ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body including two coat of white synthetic enamel paint over one coat of red oxide (spray painting) all asdirected by Engineer-in-charge.

Supply & fixing in replacement top cover for geysers (confirming to IS) suitable for any makes/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade acomplete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement bottom cover for geysers (Confirming to IS) suitable for any make/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade as directed complete with inspection plate in two pieces.

Supply & fixing in replacement Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply alongwith 1 MFD capacitor and cap suitable for 250/200 mm size Fresh air fan as per sample complete all as spd and directed.

S&F plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S&F socket 3 pin 10/20 amp earth metal clad (ISI marked) complete all as specified and directed by Engineer-in-Charge.

M & L plug top, 3 pin, 5 Amp all as specified and directed by Engr-in-charge.

M & L plug top, 3 pin, 15 Amp all as specified and directed by Engr-in-charge.

M & L tape roll 25mm size 25 mtr length all as specified and directed by Engr-in-charge.

S & F switch socket combination 15 Amp all as specified and directed by Engr-in-charge.

S & F switch socket combination 5 Amp all as specified and directed by Engr-in-charge.

Supply & fixing in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in replacement PVC fresh air fan blade suitable for 250/200 mm size with all fixing accessories complete all as specified and directed by Engineer-in-Charge.

Supply and fix wall mounted fan 400mm, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed by Engineer-in-Charge.

S&F garden light ABS plastic with 10 Watt LED bulb, poles, service wire and cement work etc all as specified and directed. Make :- As per sample

Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb complete all as specified and directed by Engineer-in-Charge.

M&L providing protection pipe PVC or flexible pipe as reqd at site to out going cables, cleaning of LT panel boards with air blower cleaning inside, dressing in proper alignment, replacement of rusted iron parts with new one with suitable size of angles/strips, painting of new parts with matching colour as per existing, tightening of fixing bolts and nuts, providing thimbles to whole bunch of wires uniformly clean manner etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair factory made epoxy powder coated Load line Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including insulated 200 Amp copper bus bar, Isolated neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 32 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623 complete all as specified and directed by Engineer-in-Charge..

Note :- Total amount of Sch of credit is Rs. 85354.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

imran construction company

M/S ANIL KUMAR

LAMBA ENTERPRISES

Pall Associates

SANJEEV ENTERPRISES

L G BUILDERS