ADDITION ALTERATION TO COMMUNITY HALL OF CVRDE AVADI

Amount

Schedule 'A' Part - I (BUILDINGS WORK) This Schedule (contains under mentioned Sl. item No. 1.01) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for Construction of Toilet complete all as shown on drawings and as specified.

Lump sum price worked out by the Contractor for "EARTHWORK AND SITE CLEARANCE ” as listed in Schedule ‘A’ Part - II representing _______ % ________________ percent Above / Below the lumpsum price of 112878.00 inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for "Addition/Alteration ” as listed in Schedule ‘A’ Part - III representing _______ % ________________ percent Above / Below the lumpsum price of 4923056.04 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “ Internal Electrification ” as listed in Schedule ‘A’ Part - IV representing _______ % ______________ percent Above / Below the lump sum price of `349453.71 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for “ Road/Path/Hard standing ” as listed in Schedule ‘A’ Part - V representing __________ % ____________ percent Above / Below the lump sum price of `560869.16 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for " External Electrification” as listed in Schedule ‘A’ Part - VI representing ______ % ______________ percent Above / Below the lump sum price of `378990.10 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for “ Sewage Disposal ” as listed in Schedule ‘A’ Part - VII representing _______ % _________________ percent Above / Below the lump sum price of `54478.18 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “Area Drainage ” as listed in Schedule ‘A’ Part - VIII representing _______ % _________________ percent Above / Below the lump sum price of `111672.47 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “Internal Water Supply ” as listed in Schedule ‘A’ Part - IX representing _______ % _________________ percent Above / Below the lump sum price of `13764.89 inserted by the MES in Schedule ‘A’ Part - IX

Schedule 'A' Part -X This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 11.00 to 46.00

Taking down main switches, distribution board, steel enclosure with MCB’s any way and rating including wooden board or from steel board and making good disturbed surfaces complete all as specifed and directed.

M&L for Point wiring with PVC insulated, FRLS PVC unsheathed, two single core, stranded, copper conductor cable 1.5 Sqmm size, 1100V grade, drawn into and including concealed rigid non-metallic PVC conduit not less then 20mm wide, ISI marked with 1.5 Sqmm unsheathed, stranded copper FRLS cable for continuous earth wire and including pressed modular metal concealed terminal boxes of reqd size and suitable size inner frame with outer cover suitable for modular switches/sockets/regulators all as specified & directed for the following : a) One light/fan point controlled by one switch NOTE: (i) The quoted rate shall deemed to include the cost of pressed modular metal concealed terminal boxes, provision of blank plates as per requirement etc. (ii) Quoted rate shall deemed to be include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

All as per Sl. Item No. 12.00 here-in-before but for One point for socket outlet 5 amp independent board

All as per Sl. Item No. 12.00 here-in-before but for One point for socket outlet 5 amp same board

All as per item No.12 above but One 3/5 pin 15 amp socket outlet point controlled by one switch using 4 sqmm copper conductor FRLS cable with continuous earth wire of 4.0 sqmm copper conductor FRLS cable on independent board complete all as specifed and directed.

Taking down the sub main wiring of any size from the wall / roof / ceiling and removing from the site and making good disturbed surface all as directed.

M&L for sub main wiring for two single core PVC insulated cable 6sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit not less than 25 mm dia including all conduit and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete all as specifed and directed. Note: Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.

M&L for sub main wiring for two single core PVC insulated cable 4sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit not less than 20 mm dia including all conduit and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete all as specifed and directed Note: Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.

M&L for sub main wiring for four single core PVC insulated cable 6sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit not less than 25 mm dia including all conduit and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete all as specifed and directed .(Note: 4runs of 6sq mm cable and one run of 6sq mm cable and 1 run of PVC conduit shall be measured as one unit.) Note: Four runs of cable, two runs of earth continuity conductor and one run of PVC conduit shall be measured as unit length.

S&F MCCB 100 Amps, 4 pole, 16 kA breaking capacity, 415 volts, fixed type complete all as specifed and directed

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specifed and directed.

S&F LED light fitting surface and wall mounted 4 feet LED 20 W, 5700K, 230V 50Hz carbonate diffuser & integrated electronic driver batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specifed and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specifed and directed.

S&F Heavy duty exhaust fan 300mm sweep 240V 50hz 900RPM single phase AC supply with metal body powder coated with protective steel bird gaurd on wall with all fixing arrangments to fix on wall, including provision copper bunched flexible three core 1.5sq.mm PVC insulated cable from ceiling rose to fan including marking MES Number on exhaust fan motor complete all as specified and directed.

S&F Ceiling fan 5 star BEE rated ,milk white coloured complete 1200mm sweep with down rod and all accessories energy efficient suitable to function on 230V, single phase AC supply, complete and connecting with and including provision of three core 1.0sqmm cable flexible copper conductor from ceiling rose and requred length of down rod including marking MES Number on ceiling fan motor complete all as specified and directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth 4mm , GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL, and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 50mm thick RCC cover (1:2:4) type B1 mix with 8mm dia nominal reinforcement @ 75mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciified and as directed. NOTE:-1 Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. 2. GI wire above 7.5m will be measured and paid seperately

S&F Sheet metal enclosure, Vertical, flush type DB with 200 Amp bus bar, double door, provision for 4Pole MCCB as incomer, double door type complete all as specified and directed

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 AMP and current carrying capacity in the DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning.

S&F MCB SPN 240 Volts and 32 Amps current rating, 50Hz, 'C' curve with short circuit protection having rupturing capacity not less than 10KA, with suitable copper lugs, complete all as specified and as directed.

S&F MCB SPN 240 Volts and 10 Amps current rating, 50Hz, 'C' curve with short circuit protection having rupturing capacity not less than 10KA, with suitable copper lugs, complete all as specified and as directed.

S & F 1X30W LED road way lighting luminaries with pressure die -cast powder coated LED street light suitable for building light clear acrylic cover incl 25mm dia GI pipe bracket of 1.5m , bent to shape with necessary fixing arrangements with 0.5mm weather proof 3 core copper cable and complete accessories including drive with suitable connection complete all as specified and directed.

Point wiring complete with 1.5 sq.mm. (nominal area), single core, PVC insulated, unsheathed, multi-stranded copper conductor FRLS 1100 Volts grade cable ISI marked drawn through and including medium grade, rigid, non-metallic PVC conduit of suitable size not less than 20mm dia, with all necessary fittings, concealed in wall/ roof /floor duly earthed with one run of single core cable FRLS of same description as for wiring above but 1.5 sq.mm size as continuous earthing wire connected to common earth dolly with and including sunken type pressed steel / welded MS terminal boxes made out of 16 gauge MS sheet with hold fasts, flush mounting in the wall for mounting switches / switch / socket / fan regulators etc covered with 3mm thick plastic laminated sheet, complete all as specified and as directed for One Light / Exhaust fan point controlled by one 5A switch. NOTE: (i) The quoted rate shall deemed to include the cost of MS terminal boxes s, laminated cover plate, provision of blank plates as per requirement etc. (ii) Quoted rate shall deemed to be include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

Dismantling and taking out burnt / unserviceable distribution box and supply, installation, testing and connecting to electrical system distribution board (outdoor type), suitable size, factory made, double door, cubical type, compartmentalised design, back door hinged type & openable, fabricated out of 3mm thick CRCA steel sheet, weather/dust/vermin proof, IP 65 protection, suitable spaced totally enclosed in chamber, earthing arrangement, locking arrangement with one No lock with duplicate key duly painted with power coated paint and providing the following items incl connection of all incoming and outgoing cables using suitable size lugs and glands, danger notice board, panel to be mounted on PCC block/brick pillar complete in all respect all as specified & directed by EIC including comprising of following items :-

Dismantling and taking out burnt / unserviceable Distribution box and supply, installation, testing and connecting to electical system distribution board (outdoor type), suitable size, factory made, double door, cubical type, compartmentalised design, back door hinged type & openable, fabricated out of 3.15 mm thick CRCA steel sheet, weather/dust/vermin proof, IP 65 protection, suitable spaced totally enclosed in chamber, earthing arrangement, locking arrangement with one No lock with duplicate key duly painted with power coated paint and providing the following items incl connection of all incoming and outgoing cables using suitable size lugs and glands, danger notice board, panel to be mounted on PCC block/brick piller complete in all respect all as specified & directed by EIC including comprising of following items :-

(i) 4 Nos bus bars of high conductivity aluminium alloy, 3 Nos for phase (R,Y,B) rating 240 amp rating and 1 No for neutral rating 200 amp, mounted on DMC support with heat shrink sleeve - 01 set. (ii) MCCB 4 pole 160 amp, 415 volts, 25 KA - 01 No ( Incoming) (iii) MCB 4 pole 63 amp, 415 volts 10 KA - 03 No. (outgoing) (iv) Voltmeter, three phase, digital type, suitable for range (0-500) volts with selcetor switch - 01 No. (v) Ammeter, digital type, three phase, 200 amp with suitable CT's complete - 01 Set (vi) Indication lamp (R,Y,B), LED type, with toggle switches - 03 Set.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and incl taking down u/s HPSV fitting any type complete all as specified and directed.

S & F in replacement of fibre moulded loopin loopout enclosure of size 240mm x 130mm x 110mm, consisting of HD bakelite connector strip including 6 Amp SP, fixing of enclosure with pole using 40 x 6 mm size MS Flat clamps of required shape with bolts, nuts & washers complete all as specified and directed.

S&F garden decorative 8/9 watt LED Bollard light with opal diffuser and aluminium reflector including PCC foundation and connection incl taking down u/s CFL fitting any type complete all as specified and directed. all as specified and directed.

Supply and fixing post top lantern LED type 20-watt 230-watt volts AC outdoor type with decorative post top for 360-degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. and including CFL fitting complete all as specified and directed.

Supply and lay water proof treatment with APP based polymeric membrane minimum weighing 3 Kg/Sqm and 3mm thick reinforced with polyester non wove fabric( wt not less than 150gms/sqm ) laid on primed surfaces including bituminous primer conforming to IS-3384 applied @ 0.3 ltrs/sqm by forced application including torching and aluminium paint on top all as specified and directed. Four course roof treatment consist of as under: - (i) Cleaning the roof surfaces and applying one coat of bituminous primer conforming to IS-3384 @ 0.3 ltrs /sqm (ii) Laying of APP based membrane as specified thickness and weight. (iii) Applying one coat of industrial bitumen grade 85/25 @ 1.2 kg/sqm including cleaning surfaces. (iv) Applying two coats of aluminium paint @ 100 ml/sqm

Bituminous filler board of 20m thick for crumble joint of wall / beam / column width including provision of aluminium sheet of 1.5mm thick, 30cm width fixed width rawl plugs and screw @ 600mm c/c complete all as specified and directed

M&L Soap shelf, PVC white/colour appx size 450 x 125 x 40mm (as per sample). Make: Prayag or equivalent

S&F Bathroom cabinet PVC with mirror suitable for to keep the bathroom items, size 400 x 500mm, white colour all as specified and directed. Make: PRIYAG (CAT. NO - 554)

S&F 15mm bore dia (Fancy type) Health faucet chromium plated including flexible pipe, screwed for iron pipe and fixed complete all as directed.

Preparation of newly plastered wall surface and applying two coats of weather coat paint over a coat of primer and 2mm thick wall putty complete all as specified and directed.

Complete removal of existing treatment of any type on the wall and applying two coats weather coat paint over a coat of primer over a 2mm thick wall putty, complete all as specified and directed

D Subramani and Sons

SAI SRI HARSHA ENTERPRISES

S MARI CONTRACTOR