CWE/HSR-30 OF 2023-24 REPAIR/REPLACEMENT OF STREET LIGHT, GARDER LIGHTS, CABLE, SWITCH GEAR AND CONNECTED ITEMS UNDER GE HISAR

Amount

Taking down of old unserviceable flood light/post top light/highbay light/bollard light/spike light of any make, typa and capacity complete all as specified and directed.

Supply and fixing in replacement LED highbay light 100 W (or nearest higher Cap), suspended or surface type with very high efficiency in PDC housing suitable for sheds. The luminaire has efficacy 110Lm/W with Ingress protection of IP66 including connecting 3 core copper wire complete all as specified and directed. Make: Crompton Cat Part No. TIP-320-100-57-SL-GL-NSG, Surya Cat No SLE RHB 100W, Havells Cat Part No. SAUCERGENXHBP100WLED757P90DBOLTG, WIPRO Cat Part No LF20-102-060-57-G2, or equivalent.

S&F in replacement LED flood light fitting of capacity 120W, efficacy >110LPW (or nearest higher Cap), 240 Volts, energy saving, environmental friendly, long life, exclusive innovative, die cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting complete with accessories, pre-wired upto a terminal block and mounting attachment complete all as specified and directed. Make: Crompton Cat Part No TFS -504-120-57-60D-SL-GL-NSG, Havells cat part No JET AIRISFL120W LED 757APWBLTG, Wipro cat part no LF 34-132-60-57XX,

S&F in replacement LED flood light fitting of capacity 100W, efficacy >110LPW (or nearest higher Cap), 240 Volts, energy saving, environmental friendly, long life, exclusive innovative, die cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting complete with accessories, pre-wired upto a terminal block and mounting attachment complete all as specified and directed. Make : Crompton Cat Part No. TFS-504-100-57-60D-SL-GL-NSG, Havells Cat Part No. JETAIRISFLS100WLED757ARWBLTG, WIPRO Cat Part No. LF20-122-060-57-G2

S&F in replacement LED flood light fitting of capacity 70W, efficacy >110LPW (or nearest higher Cap), 240 Volts, energy saving, environmental friendly, long life, exclusive innovative, die cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting complete with accessories, pre-wired upto a terminal block and mounting attachment complete all as specified and directed. Make: Crompton Cat Part No. TFS-504-70-57-60D-SL-GL-NSG, Havells Cat Part No. JETAALBAFLOODLIGHT70W, WIPRO Cat Part No. LF20-102-060-57-G2

S&F in replacement post top LED lantern of capacity 40 W (or nearest higher Cap), complete, 230 V AC outdoor type with decorative post for indirect light IP-65 protection, resistant to impact and corrosion glare free and better uniformity complete with driver and LED lamp all as specified & as directed. Make: Crompton Cat Part No. CBP-610-40-57-SL-CA-NBK, Havells Cat Part No. RUBYPT40WLED757PSYM TOPC, WIPRO Cat Part No. LP07-501-XXX-57CL

S&F in replacement post top LED lantern of capacity 20 W (or nearest higher Cap), complete, 230 V AC outdoor type with IP-65 rated LED post Top ideal to light up parks, gardens and heritage sites complete with driver and LED lamp all as specified & as directed. Make Crompton Cat Part No. LPTH-20-CDL, Havells Cat Part No. RUBYPT25WLED830SSYMTOPC, WIPRO Cat Part No. LP07-251-XXX-57-CL,

S&F in replacement LED bollard light of capacity 10 W (or nearest higher Cap) in cylindrical shape, high surge protection, integrated LED driver , high durablity with IP-66 complete all as specified & directed. Make : Crompton Cat Part No. LBLSN-10-CDL, Havells Cat Part No. TURINBLS10WLED830PSYMTOPC, WIPRO Cat Part No. LB12-131-SPK-65-08

S&F in replacement Spike light of capacity 5 Watt environmental friendly, compact, light weight, energy saving, IP66 LED spike light using COB LED as light of colour Red, Green, Blue and Warm White. Multi purpose application like columnlighting, tree up-lighting, statue accentuation etc.of make Havells Cate No : IRVINESPS5WLED830PSYMTG, Jaquar Cat No LSPK05R112W

S&F in replacement LED drivers suitable for capacity 35 to 100 watt and any make street light complete all as specified and directed.

S&F in replacement surge protection device 10 KV for LED light fitting complete all as specified & directed.

S&F in replacement street light bracket made to shape out of GI pipe 32 mm bore light grade, 1.5 meter length fixed with & including necessary MS Clamps of size 40x5mm including nuts, bolts and washers on pole etc complete all as specified and directed.

S&F in replacement 20mm rigid non-metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified & directed.

S&F in replacement FRLS PVC insulated and PVC sheathed 1.5 sqmm 3 core multistranded copper conductor cable from for street light including PVC wire connectors for making connection complete all as specified and directed.

S&F in replacement PVC sheathed 1.5 sqmm Twin core Aluminium conductor cable from street light fitting to conductor including PVC wire connectors for making connection complete all as specified and directed.

Prunning / trimming the branches of trees if any along overhead line, 3 mtr on all side below/ above/ sides of overhead line and removing the same upto 150 mtr away each span not exceeding 70 mtr etc complete all as specified and directed. Note :- The above is to be ensured for the entire contract period by cutting/trimming of trees any number of times as required.

M&L for preparation of old painted surface of steel tubular LT poles 9m long and applying two coats of synthetic enamel paint with black and white or yellow strips 30cm wide each upto 1.5m height from top of PCC foundation block and on remaining surface of steel pole applying one coat of aluminium paint after preparation of old steel surfaces including marking of numbering of poles with synthetic enamel paint white in colour in 80mm high letters over 150mm x 230mm yellow base and applying one coat of cement base paint on PCC pedestal complete all as specified and directed.

M&L for numbering of poles with synthetic enamel paint white in colour in 80mm high letters over 150mm x 230mm yellow base paint on PCC/steel pole complete all as specified and directed.

M&L for disconnecting, taking out defective under ground LT cable from loop of length not more than 3 meter size of cable 6 sqmm to 25 sqmm of any core including excavation, taking out bricks cover and relaying the old cable in loop and making connection with proper new thimbles in junction boxes, Feeder pillar box, MCBs etc including refilling of sand, relaying old bricks and returning, filling in soil etc complete including making good surfaces area as per surroundings all as specified and directed.

S&F in replacement PVC junction box suitable for street light of size not less than 350mm x 250mm x 150mm, made out of polycarbonate having front side openable shutter duly provided with locking arrangement and provided with 04 Nos aluminium bus bar of rating 200 Amp alongwith 01 No MCB 6 Amp SP and provision of 02 Nos cable entries of size upto 16 sqmm 4 core, fixed on any type of street light pole with proper size MS clamp with nut & bolt and connected assessories complete all as specified and directed. Note:- MS streep, nuts, bolts and washers will be measured and paid separetaly

Supply and Fixing MS cross arm, angle, clamps, nuts, bolts and washers and supply and fixing new MS Cross arms, MS strrep bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed.

Re-stringing / Re-stretching including jointing in situ of each span not more than 45 Mtrs between two electric poles having 3 to 5 Nos of ACSR conductors including GI earth continuity wire, with/ without guarding wires on electric poles of any size at different locations all as ordered manually or by telephonically means to the extent of permissible sag or tension by removing jumpers or bindings from insulators and making fresh binding with aluminium tapes after stringing complete as ordered.

Taking out the old unserviceable LT underground cable of size 6 sqmm 2/4 core to 16 sqmm 2/4 core aluminium conductors from trenches/wall/floor/road/ culverts or pole etc including brick cover complete all as specified and directed.

Supply, laying , jointing, testing and commissioning of size 6 sqmm 4 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified and directed. Note : Excavation, earth work, sand cushion & brick protection shall be paid separately.

All as per item No 24 above but of size 10 Sqmm 4 core

All as per item No 24 above but of size 16 Sqmm 4 core

S&F in replacement twin core flat 16 Sqmm size 1100 volt grade heavy duty cable PVC insulated with aluminum solid conductor over all PVC sheathed complete all as specified and directed.

Supply and laying double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50mm outer dia and 38 mm inner dia complete all as specified and as directed

Excavation in trenches not exc. 1.5 m wide and not exc 1.5 m deep in soft/loose soil for laying of cables, GI pipe or filling of earth resistance enhance compound and getting out including levelling of bottom suface to required level complete all as specified and directed

-- do -- all as per item No. 29 above but in soft disintegreted rock/laterite rock.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified.

Taking up bricks laid as cable covers and stacking serviceable brick for reuse at site etc complete all as specified and directed.

Laying only old bricks retrieved from item Srl Item No. 32.00 (here-in-before) as cable covers in trenches etc complete all as specified and directed.

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge.

Removing excavated material (ie soil) from site to a distance n. exc 50 m away and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed

Returning filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed.

Boring of hole under road/pavement/hard standing or any other situation by mannual means and suitable for passing of GI pipe 40 mm bore and making good both ends all specified and directed

S&F in replacement Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (40mmx6mm) clamps, bolts, nuts and washers for protection of LT electric cable complete.

S&F in replacement MCB four pole of capacity 63A,10 KA, type 'C',240 volts complete all as specified and directed.

Supply & fixing in replacement Nature Switch control panel (using Infrared Sensor technology) for Automatic switching of Street Light. The Panel should be suitable enough to take 3-phase load of 3-5KW. Nature Switch operation should be based on Natural Light Lux level ie required Illuminance Level for Switching ON is ≤ 60 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility of min. 4 hrs to max. 12 hrs.The Sensor along with suitable Power Contactor(s) and Incoming-Outgoing MCBs should be enclosed in a pole/wall mountable FR grade thermoplastic polycarbonate Enclosure (with HINGED LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation (i.e. Sensor By-Pass option). The Circuit should be suitable enough to take 3 nos. Contactors of 16 Amps/ phase rating, 3 nos. Incoming MCBs & 3 nos. Outgoing MCBs of 16-20 Amps each & Circuit wiring (Copper) of min.10 sq.mm complete all as specified and directed

Supply, install, testing and commissioning in replacement LT Feeder pillar distribution panel board CPRI approved outdoor type, horizontal type, double door system, weather proof, dust and vermin proof, made out of 40x40x6mm angle iron frame and 3.15mm thick CRCA sheet duly powder coated of suitable size with push type locking arrangement, factory assembled cubicle pattern modular and compartmentalized construction, floor mounted free standing type, 3 phase 4 wire system including wiring with suitable size rated current carrying capacity aluiminium bus bar with epoxy insulated coating with colour code and insulated support, complete with following accessories and suitable for accomodate the following MCB's etc complete and mounting the panel board on ground with PCC(1:3:6) bedding upto height of 30 cm above ground level complete all as specified and as directed (a) 150 Amps aluminium bus bar for all three phases and 100 Amps for neutral - 01 set. (b) MCB 63A TPN as incoming - 01 No (c) MCB SPN 32 upto 05 Nos (d) Internal All links with copper conductor or solid aluminum bus bar of adequate capacity -01

Dismantling unserviceable concrete pole/struts of any size removing from site etc complete all as specified and directed Note :- (i) The rates quoted shall deemed to include taking out conductors, earth wire from existing pole and refixing on new pole..

Supply, erecting & fixing true vertical position Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) complete all as specified and directed. Note :- (i) Earth work & PCC shall be measured and paid separately in respective items.

M&L for PCC (1:4:8) type D-2 using 40 mm crushed graded stone aggregate as in for pole foundations etc complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm crushed graded stone aggregate as in coping and the like including weathering slightly rounded or chamfered angles etc for poles complete all as specified and directed.

Dismantling insulator any type / any size from LT pole etc complete, all as directed.

Supply and fixing in replacement pin type insulators LT 1100 Volts grade porcelain vitreous white or brown including one galvanized mild steel spindle, two galvanized iron washers, one galvanised iron nut, 100 mm height, 65 mm dia all as specified and directed.

Supply & fixing in replacement shackle type insulator LT 1100 volt grade porcelain vitreous white or brown including galvanised insulator bolts, nuts 12 mm dia and washer including 31x3mm galvanised mild steel straps, 75 mm height and 90 mm dia of insulator complete all as specified and directed.

M/L for Demolition of path /concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed.

M/L for cement concrete type B-2, 1:2:4 (40mm graded aggregate) 150mm thick complete all as specified and as directed.

M&L in replacement of PVC separator in position to keep 2 Nos ACSR conductor wire as equal spacing complete all as specified and directed suitable for following Nos of ACSR conductors wire

M&L in replacement of PVC separator in position to keep 5 Nos ACSR conductor wire as equal spacing complete all as specified and directed suitable for following Nos of ACSR conductors wire

Supply and fixing in replacement Aluminium conductor steel reinforced (ACSR) of any size for LT OH lines on poles including stringing ,binding with aluminium wire 14 SWG or aluminium tape incl jumpers complete connecting of disconnected cable, service cable and street light connection complete all as specified and directed.

S&F in replacement Lithium based energy efficient integrated, solar street light 25 Watt Cap in single FRP body encase solar PV Panel 53/55Wp monocystalline, lithium battery 11.1/12.8V, 28.6AH with induilt BMS, high brightness W-LED (180lm/Watt) lamp, CRI>70, color temperature 6500K, microcontroller based charge controller cum driver, automatic dimming function with PRI motion sensor, dusk to down operation, LUX output 20-25 (from 8-9 mtr height), working temperature (-) 10 to (+) 55c weight : 14-16 Kg, with adjustable MS clamp suitable for pole/wall mounting, protection : short circuit, overload, reverse polarity and battery protections. Firm should produce vital parameters test report from NABL accredited lab and should be of made in India with CE & ROHS certified and including necessary civil work and incl GI pipe bracket of suitable dia light grade pipe bent to shape of approx length 1.5 mtr including 2 No MS clamp of flat iron of suitable size with nut, bolt washer including 4mtr long GI pole, top dia 70mm and bottom dia 130mm, thickness of sheet 3mm, base plate size 200 x 200 x 12mm foundation bolts 4 Nos, 16mm dia, 450mm long complete all as specified and directed by Engineer-in-Charge. Make - CROMPTON Cat Part No CSADSMP25CDL-NC, Surya Cart No SSLE AIO 25W HT3 50WP 24AH LFP W5 Solar or equivalent in Haveels, Wipro

SAINI ELECTRIC STORE

Natwadia Electrical Company