WBPWD/EE/CED/e-NIQ-48/2024-25

Amount

SUB-HEAD 1--SITC of DB,Main switch & Change over Supplying and fixing 415V, 100 A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make- Havells/L & T/Siemens ]

Supplying and fixing 125A,415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [Make- Havells/L & T/Siemens]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [Make:HAVELLS/LEGRAND/Siemens/Schneider/ABB ]

upto 160 A-4way

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [Make:HAVELLS/LEGRAND/Siemens/Schneider/ABB ] 4way

Supplying and fixing double-door SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [Make:HAVELLS/LEGRAND/Siemens/Schneider/ABB ]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [Make: HAVELLS/LEGRAND/ Siemens/ Schneider/ABB ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make: HAVELLS/LEGRAND/ Siemens/ Schneider/ABB ]

63A TP MCB

6-32 A SP MCB

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.

SUB-HEAD 2--Distribution Wiring Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]- Average run 8mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works- 20mm size

25mm size

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Havells/KEI/Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required- 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm)

SUB-HEAD 3-- Computer Board & Socket Supplying & Fixing sheet metal inspection box (16 SWG) of 175mm x 150 mm x 65 mm flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works.

Supply & Fixing bakelite / perspex top cover of 175mm x 150 mm x 65 by Brass screws after making housing for switchby cutting bakelite / perspex cover and making necessaryconnections as required.

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works- (a) 150 mm x 100 mm x 65 mm

(B)175 mm x 100 mm x 65 mm

(C)200 mm x 150 mm x 65 mm

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc.

SUB-HEAD 4 -- SUPPLY & Fixing OF FANS Supply & Delivery of 230V, 1-Ph, 1200 mm sweep BLDC ceiling fan having Wattage ≤ 35 Watt, R.PM ≤ 300, Air Delivery ≥ 220 C.M.M incl. all accessories (Without Remote). (Make- Crompton / Usha / Orient/ Polar) [BEE 5 star rated]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supply & Delivery of 220V, Single Phase, 50 Hz A.C heavy duty exhaust fan of following sizes having complete metal body. (Make- EPC/ USHA/Orient CROMTON) [BEE star rated]

230 mm (9"), 4 Blade, RPM ≤ 1370 , Wattage ≤ 40 Watt, Sound level ≤ 49 dB, Air Displacement (In CFM) ≥ 440

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:(a) 23 cm (9")

Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long)(a)For 23 cm (9") Exhaust fan

SUB-HEAD 5 --SUPPLY OF LIGHT FITTINGS Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification

9 watt LED bulb B22/E 27

Supply & Delivery of 240V LED lamps of following wattage with glare free light distribution having minimum luminous efficiency of 100 Lm/Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification

.5 watt LED bulb B22/E 27(night lamp)

Supply and Delivery of 4 feet Industrial box type single LED tube batten/mounting rail (rust free) suitable for single TLED lamp. [Make- Philips/Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate]

Supply and Delivery of 4 feet Industrial box type double LED tube batten/mounting rail (rust free) suitable for single TLED lamp. [Make- Philips/Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate]

Supply & Delivery of 240V, 18/20 W LED Tube (Polycarbonate with heat sink) with glare free light distribution with CCT (5000K-6500K) having minimum luminous efficiency of 100 Lm/Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc

Fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

SUB-HEAD 6--AREA LIGHTING Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Supply & Delivery of 240V, LED street lights with optic lens and polycarbonate diffuser having following wattage, in white powder coated pressure die cast aluminium housing with IP 66 protection & incl. 10 kV SPD, with glare free uniform illumination with CCT (5700K-6500K) having minimum luminous efficiency of 110 Lm/ Watt or better & 50,000 LED burning hours or more. [Make- Philips/ Crompton/ Wipro or manufacturer with own NABL accredited lab with valid test certificate] [LED lamps & accessories shall have BEE certification]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Suppty and Erection of 7 mtr galvanized as per IS 4759 octagonal pole BSEN 1O025 grade SJ355 JO or equivalent with J-bolt, base plate, in built loop box, 1 mtr length arm bracket of minimum dia 40 mm with cement concrete casting (1:3:6) upto a minimum depth of 1 mtr below the ground level' (Make- Transrail/ Bqiaj/ Bansal)

Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run

SUB-HEAD 7--Supply & laying of cable Supply of 2/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

2 core 6 Sq. mm (for street lights)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of one No. cable upto 35 sqmm. in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :-

2Core 6 Sq. Mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 6 sqmm cable

SUB-HEAD 8--SITC of Glow sign Board SITC of Glow Sign Board (12ft x 4 ft x 6 inch depth) made from 40x40x5mm MS angl, 40x5mm MS flat having the provision for opening front side by 25x25x5mm MS angle, 3 nos hinges duly welded. There will be vertical support in each 3ft length and as per direction of EIC. The entire board should be painted with one coat of synthetic enamel paint over one coat of RO primer. The front and side facia of the board is to be made with 2mm thik White PVC sheet of export quality having suitable size and to be fixed by required SS screws. The back side of the board should be enclosed by 20 SWG GI SHEET. S & F 25X25X6 mm aluminium angle by SS Screws at peripheri of the board. The matter is to be'incripted on a whole best quality venyle sheet as per approved size, colour & matter which will be pasted properly over the PVC sheet. Inscripton of the board will be provided at the time of layout. Demo incription should be approved by EIC befor finalization.

Installation the same Glow sign board at suitable place by making suitable sized RCC muffing & neet cement finishing etc with two nos 32x32x6 mm MS angle iron bracket for support on the back side rigidly grouted or drilling for support on the back side rigidly grouted or drilling hole for protection support on the back side rigidly grouted or drilling hole for protection support by heavy type screw/nuts & cement net finish etc. & painting

S & F 240V, 4ft, 18/20 Watt-2100 lm LED Tube light fittings including making entire connection with 3x1.5 sq. mm stranded copper wire through flexible PVC pipe for proper illumination of the Glow Sign Board from inside as per direction of EIC (Make: Philips/Crompton/Wipro/Bajaj)

SUB-HEAD 15--SITC of DG Set Supplying installation, testing and commissioning of silient typwe DG sets, AMF Panel, Bus Ducting/Cables from DG sets to essential panel, synchronizing panelwhere required, DG set enclosure room sound insulation / ventilation/smoke exhaust as required , earthing of DG set system, control cablin, fuel tank / piping DG set exhaust piping/exhaust chimney as per CPCB norms, Civil works connected with DG Sets including foundation as required.

Supply of 2/4 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]-

4 core 16 Sq mm

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting .

Laying in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed-one No. cable upto 35 sqmm.

SUB-HEAD 11 --EARTHING INSTALLATION Excavation of soil for installation of Earth Electrode and filling & ramming.For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts.below the ground level as below : By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages-(vi)No. 8 SWG

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Note1:Rate Should be Quoted with inclusive of all taxes, duties, cess as applicable.

M/S DAS ENTERPRISE (BID ID -6334367)

DAS ELECTRICAL ENGINEERING CO (BID ID -6334235)