Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC SHOP NO 106 1ST FLOOR ASHOKA SHOPPING CENTRE LT ROAD MUMBAI 400001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | L1 | Accepted-AOC Admitted being L1 | |
| 2 | L2₹37.6 L+₹69,303 (1.88%)Rejected-Finance FLAT NO 201 GREEN VALLEY CHS PLOT NO 26 SECTOR 19 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Not admitted being L2 | |
| 3 | L3₹38.7 L+₹1.8 L (4.89%)Rejected-Finance | L3 | Rejected-Finance Not admitted being L3 | |
| 4 | L4₹39.7 L+₹2.8 L (7.67%)Rejected-Finance | L4 | Rejected-Finance Not admitted being L4 | |
| 5 | L5₹42.5 L+₹5.6 L (15.2%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L5 | Rejected-Finance Not admitted being L5 |
| Sl No | Description | Qty | Unit | M.K Enterprises L2 | R A Electric Co. L4 | pk Enterprises L1 | venus enterprises L3 | Shree Ayyappa Engineering L5 | cooltech engineering services L7 | Advait Enterprises L8 | BRITE INDUSTRIES L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 12.5 to 15 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 12.5 to 15 HP HP pump set.
(b) Ball bearing suitable for 12.5 to 15 HP HP pump set
(c) Bronze bush suitable for 12.5 to 15 HP HP pump set | 12 | Each Job | 15,999 ₹1,91,988 | 17,100 ₹2,05,200 | 15,900 ₹1,90,800 | 17,800 ₹2,13,600 | 13,331 ₹1,59,972 | 15,400 ₹1,84,800 | 14,751 ₹1,77,012 | 12,500 ₹1,50,000 Lowest |
| 2.00 | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 10 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 10HP HP pump set.
(b) Ball bearing suitable for 10HP HP pump set
(c) Bronze bush suitable for 10HP HP pump set | 16 | Each Job | 12,999 ₹2,07,984 | 12,500 ₹2,00,000 | 11,200 ₹1,79,200 Lowest | 12,150 ₹1,94,400 | 14,600 ₹2,33,600 | 14,575 ₹2,33,200 | 17,926 ₹2,86,816 | 13,900 ₹2,22,400 |
| 3.00 | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 7.5 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 7.5 HP HP pump set.
(b) Ball bearing suitable for 7.5 HP HP pump set
(c) Bronze bush suitable for 7.5 HP HP pump set | 20 | Each Job | 10,109 ₹2,02,180 | 10,990 ₹2,19,800 | 9,950 ₹1,99,000 | 8,975 ₹1,79,500 Lowest | 11,301 ₹2,26,020 | 12,050 ₹2,41,000 | 11,926 ₹2,38,520 | 12,100 ₹2,42,000 |
| 4.00 | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 3 to 5 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 3 to 5 HP HP pump set.
(b) Ball bearing suitable for 3 to 5 HP HP pump set
(c) Bronze bush suitable for 3 to 5 HP HP pump set
Note for Item Nos. 01 to 04 :- (i). Quoted rates shall be deemed to be included the cost of replacement of gaskets, packing with bearing grease, glands with graphite packing, nuts bolts, washers etc.
(ii). Cost of transportation shall be deemed to be included in unit quoted rates of these items. (iv). While taking out pump for repairs, the contractor will make arrangement of plugging of suction & discharge line with dead flanges, so that pumping of installation should not disturbed and ensure there is no leakage of water. | 16 | Each Job | 6,299 ₹1,00,784 | 7,590 ₹1,21,440 | 6,245 ₹99,920 | 6,950 ₹1,11,200 | 6,131 ₹98,096 Lowest | 7,069 ₹1,13,104 | 7,329 ₹1,17,264 | 6,900 ₹1,10,400 |
| 5.00 | M & L for painting of motor & pump for removing the existing deteriorated paint by scrapping the complete body along with complete foundation of Pump and Motor and filling the cavities with filter spray painting with anti corrosive paint and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer and marking of SM / MES No. with black / white paint, complete all as specified and directed by Engr-in-Charge for the following:-
(a). Capacity 15 HP to 30 HP | 30 | Each Job | 2,619 ₹78,570 | 2,450 ₹73,500 Lowest | 2,500 ₹75,000 | 3,500 ₹1,05,000 | 2,783 ₹83,490 | 3,782 ₹1,13,460 | 4,431 ₹1,32,930 | 3,500 ₹1,05,000 |
| 5.01 | (b). Capacity 7.5 HP to 12.5 HP | 50 | Each Job | 1,729 ₹86,450 | 1,755 ₹87,750 | 1,700 ₹85,000 Lowest | 2,250 ₹1,12,500 | 1,943 ₹97,150 | 2,253 ₹1,12,650 | 3,260 ₹1,63,000 | 2,290 ₹1,14,500 |
| 5.02 | (c). Capacity 2 HP to 5 HP | 60 | Each Job | 996 ₹59,760 | 1,055 ₹63,300 | 990 ₹59,400 Lowest | 1,750 ₹1,05,000 | 1,231 ₹73,860 | 1,467 ₹88,020 | 2,160 ₹1,29,600 | 1,450 ₹87,000 |
| 6.00 | Demolition of PCC foundation of any size and material & Labour for construction of new foundation as per site requirement by using plain cement concrete 1:2:4, type B-1 (Using 20mm graded stone aggregate) with and including 6 nos. of M20 X200 mm foundtion bolts which has to be grouted in the PCC & supply & fix of MS plate 600 X 700 X8 mm thick fitted properly in the foundtion bolts, duly drilled & tap for fixing the pump set painted with two coats of anti corrosive paint over one coat of red oxide primer complete all as directed by Engr.-In-Charge. | 22 | Each Job | 9,999 ₹2,19,978 | 9,650 ₹2,12,300 | 9,870 ₹2,17,140 | 9,560 ₹2,10,320 | 14,404 ₹3,16,888 | 15,000 ₹3,30,000 | 5,569 ₹1,22,518 Lowest | 15,500 ₹3,41,000 |
| 7.00 | S&F of MS iron frame work using MS channel, MS angle 50 x 50 x 6 mm for two structural support to pipe lines / base plate for pumps / approach ladder to over head water tanks fixed to wall by nuts bolts at T&P and bottom of size, 50 x 6 mm flat iron strip sqmm type grouting in floor. All steel work has to be painted with two coats synthetic enamel paint over one coat red oxide primer including taking down / dismantling of old one, complete all as specified and directed by Engr-in-Charge | 60 | Kg | 109 ₹6,540 | 105 ₹6,300 | 111 ₹6,660 | 85 ₹5,100 Lowest | 150 ₹9,000 | 140 ₹8,400 | 119 ₹7,140 | 135 ₹8,100 |
| 8.00 | M & L for re-winding of induction motor 900 RPM, 3 phase, 50 Hz, 415 volt of compressor motor and AHU Blower, chiller, condenser motor comprising of the following activities for induction motor of following capacities complete all as directed and as per manufacturer's instructions:-
Note :- (i). Any adjustment in the pump set, if required at site shall also be carried out by the contractor without any extra payment.
(ii) Any damage to the pump set occurs due to improper installation of motor, the contractor shall be liable for repair the same at his own cost.
(a). Capacity 20 HP and above | 3 | Each Job | 22,309 ₹66,927 | 23,000 ₹69,000 | 22,500 ₹67,500 | 23,800 ₹71,400 | 24,591 ₹73,773 | 22,000 ₹66,000 Lowest | 29,902 ₹89,706 | 22,100 ₹66,300 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
27 Jun 2026, 6:00 pmClosed
GE NW KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
IMPROVEMENT OF INSTALLATION REPAIR/MAINTENANCE AND REPLACEMENT OF MOTOR SET REWINDING OF PUMP MOTOR REPAIR OF COOLING TOWER PAINTING WORK AND REPLACEMENT OF UNSERVICEABLE MS PIPE LINES AND THEIR ACCESSORIES AND ALLIED WORKS AT NAD AREA NAVAL STAT
2026_MES_769931_1
8334/E8
Open Tender
Civil Works
Item Rate
180 days
GE NW KARANJA
Class D and above and category a (ii)
8 documents required · 8 mandatory
₹500
Yes
GE NW KARANJA
₹80,000
Yes
17 Aug 2026
5 Jun 2026
29 Jun 2026
5 Jun 2026
27 Jun 2026
20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 12.5 to 15 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 12.5 to 15 HP HP pump set.
(b) Ball bearing suitable for 12.5 to 15 HP HP pump set
(c) Bronze bush suitable for 12.5 to 15 HP HP pump set | 12 | Each Job | - | - |
| - | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 10 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 10HP HP pump set.
(b) Ball bearing suitable for 10HP HP pump set
(c) Bronze bush suitable for 10HP HP pump set | 16 | Each Job | - | - |
| - | Repair / replacement, dismantling and taking down for overhauling of chiller, condenser pump set Capacity 7.5 HP of M/S Kirloskar Ltd / Becon including provision of replacement of following defective parts all as required and Re-assembling complete set including connecting and testing in accordance with manufactures instruction to ensure stipulated performance etc. complete all as specified and directed by Engr-in-Charge:-
(a) Bronze impeller suitable for 7.5 HP HP pump set.
(b) Ball bearing suitable for 7.5 HP HP pump set
(c) Bronze bush suitable for 7.5 HP HP pump set | 20 | Each Job | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
8334TenderDocs.pdf
Tender Documents • 1.11 MB
BOQ_862222.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .