Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.8 LAccepted-AOC 00 BALAJI ENTERPRISES NEW ROAD NEW ROAD RATLAM MADHYA PRADESH 457001 | RATLAM | MADHYA PRADESH | 457001 | L1 | Accepted-AOC being L1 | |
| 2 | L2₹39.5 L+₹2.5 L (6.67%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junglighat PO Port Blair Andamand and Nicobar Islands
PERIODICAL SERVICES TO VARIOUS BUILDINGS UNDER AGE B/R II AT GE MINNIEBAY, PORT BLAIR
2022_MES_558717_2
8159/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹80,000
Yes
9 Feb 2023
22 Nov 2022
15 Dec 2022
22 Nov 2022
12 Dec 2022
29 Nov 2022
Amount
M&L for removing loose and broken concrete by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and washing with clean water with pressure and removing rubbish off the premises to a distance not exceeding 50 mtrs and including necessary safety precautions and scaffolding up to a height of 12 mtrs complete all as specified and as directed by Engineer- in- charge.
M&L for providing and applying rust remover to the exposed corroded reinforcement as per manufacturer's instruction including removing of concrete all around reinforcement by manual methods such as hammering the rebar, using wire brushes, salt paper, chiseling, etc (if left uncleared) including applying two coats of anticorrosive primer over dry steel surfaces after allowing due time for removal of rust complete as directed by Engineer-In-Charge. Note : The circumferential area around rusted bars along the length shall be measured and paid under this item.
M&L for applying one coat of epoxy bonding coat (two component epoxy resin & filler material) on dry exposed surfaces of cementitious substrate of soffit of slab, column, beam and similar structural members to create bonding with new Polymer modified mortar or micro concrete as per manufacture's instruction complete all as specified and as directed by Engineer-in-Charge. Note : Contractor is deemed to have accepted the existing condition of structures before quoting and shall liable for one more coat of above item if desired layer not obtained during the execution as directed by Engineer-in-Charge.
M&L for drilling 15mm dia holes in to RCC slab / wall / Column /beams to a depth of 100 to 150mm & provide shear connector of 12mm dia rod of length of 150mm bent to "L" shape with 75mm to be embedded in hole & 75mm to be used as dowel, fixed with polyester resin grout mixed mechanically and pour the same into the hole and insert the shear connector and finish the top; allow the same to set complete all as per manufacturer's instructions and as directed by Engineer-in-Charge.
S&F hard drawn stainless steel wire fabric weight not exceeding 4 kg per square metre, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia welding to existing reinforcement complete all as specified and as directed by Engineer- in- charge.
Material & Labour for removing loose disturbed & disintegrated concrete surface of RCC beams , columns , chajjas, ceiling, roof projections etc. and cleaning exposed rusted reinforcement , removing rusted scales by chipping and cleaning by wire brushes and applying anticorrosive epoxy coating as per manufacture's instructions on prepared surface to receive guniting, supply and tying welded IRC stainless steel wire fabric 100mm x 100 mm x 10 gauge, binding with GI wire 22 gauge to reinforcement , applying cementitious slurry (mixture of cement, sand, water and polymer based additive) uniformly to exposed surfaces and guniting using CM 1:3 average thickness of guniting not less than 40mm and at a pressure not less than 6Kg/Sqm and finishing the surfaces with 10mm thick rendering in CM 1:4, trowled even & smooth finish, without using extra cement, area exceeding 1.0sqm in each patches including necessary scaffolding and necessary safety arrangements up to 4th floor and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge. Note : Polymer based chemical additive used for guniting shall be measured and paid under separate item.
M&L for rendering the identified RCC surfaces with 15mm average thick cement mortar (1:3) on gunited surface by using POLYMER MODIFIED MORTAR in single layer of relevant proportion and weight of polymer, cement and filler material as per approved make, blended to a required consistency, applying, finishing and curing as per manufacturer's instructions including necessary scaffolding, formwork complete all as specified and as directed by Engr-in-Charge.
Supply only Polymer based additive used for guniting/grouting ratio as specified in manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge.
M&L for 15mm thick rendering/screed on terrace or concrete surfaces in cement mortar 1:4 finished even and fair and applying WPC as per manufacture's instructions complete all as specified and as directed by Engr-in-Charge Note : WPC shall be measured and paid separately under relevant item of this schedule
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface and then providing 10mm screed bed with water proofing compound with required slope complete as directed :- Note : Rendering and WPC shall be measured and paid separately under relevant item of this schedule (a) Applying bituminous primer @ 1.2 kg/Sqm on the prepared dry roof surface. (b) Laying 4mm thick APP membrane Plain finish weight not less than 3 to 4 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap.(c) Applying bituminous primer @ 1.2 kg/Sqm and applying one coat of bituminous aluminium paint at the rate of 0.3kg/sqm Note : The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane.
Note for item No 1 to 10:- (i) The work under item No 1 t0 10 shall be carried out by authorised dealer only (ii) Defect liability of these items shall be 5 years from the certified date of completion (iii) An amount of 3% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of defect liability period as mentioned above
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed by Engr-in-Charge
All as per item No 12 above but two coats of oil emulsion distemper complete all as specified and as directed by Engr-in-Charge
All as per item No 12 above but as in ceiling complete all as specified and as directed by Engr-in-Charge
M&L for applying 3mm thick wall care putty on wall and making surface even and smooth complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge
M&L for preparation of old wall surfaces and applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion including scaffolding at any height and necessary safety arrangements complete all as specified and as directed by Engr-in-Charge
M&L for complete removal of old wall surfaces and applying two coats of acrylic emulsion weather coat premium quality antifungal exterior emulsion including scaffolding at any height and necessary safety arrangements complete all as specified and as directed by Engr-in-Charge
M & L applying one coat of weather resistant floor paint including cleaning the floor / concrete surfaces/path by washing or rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI for obtaining a clean surfaces free from algae/organic particles etc complete all as specified and as directed by Engr-in-Charge
M&L for demolition of RCC work of any description and any position complete all as specified and as directed by Engr-in-Charge.
M&L for reinforced cement concrete (Design mix) M-30 graded using 20mm size coarse aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns & retaining wall etc; basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engr-in-Charge
M&L for reinforced cement concrete (Design mix) M-30 graded using 20mm size coarse aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed by Engr-in-Charge
M&L for reinforced cement concrete (Design mix) M-30 graded using 20mm size coarse aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engr-in-Charge
M&L for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge .
M&L for TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge..
M&L for TMT bars 5mm dia and over upto and including 10mm dia to 8mm dia in stirrups, spaces and binders cut ot length, bend to shape required, including cranking, bending spirally for hooping for colums, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.
M&L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, side and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter fair finished surfaces of concrete flat complete all as specified and as directed by Engr-in-Charge.
M&L for formwork to sides of pillars, posts, struts,piers,columns and stanchions fair finished surfaces of concrete Square, rectangular or polygonal complete all as specified and as directed by Engr-in-Charge.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finished surfaces of concrete flat complete all as specified and as directed by Engr-in-Charge.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) fair finished surfaces of concrete complete all as specified and as directed by Engr-in-Charge.
M&L for taking down cement plaster of any description on block masonry or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed by Engr-in-Charge.
M&L for rendering 15mm thick plaster in cement mortar 1:4 on block wall or concrete surfaces finished even and fair complete all as specified and as directed by Engr-in-Charge
M&L for rendering 15mm thick plaster in cement mortar 1:6 on block or concrete surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge
M&L for rendering 5mm thick ceiling plaster in cement mortar 1:3 on concrete surface finished even and smooth complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new surfaces of wall and applying two coats of cement based paint over a coat of chalk whitening including primer complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new surfaces and applying two coats of exterior emulsion weather coat premium quality antifungal paint over a coat of primer complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new surfaces on ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge
M & L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat of chalk whiting including primer complete all as specified and as directed by Engr-in-Charge
M&L for 40mm thick plain cement concrete type B-1 1:2:4 (nominal mix) using 20mm graded stone aggregate for correction of roof slab / roof padding including removal existing treatment and making necessary slope etc all as specified and directed by Engr-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided.
S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge
M&L for dismantling Plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings in roof covering complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre-painted galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all complete all as specified and as directed by Engr-in-Charge
S & F Aluminium flat iron work in, wind ties screwed on roof covering at any height including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description over 10cm in width or girth not other wise described. complete all as specified and as directed by Engr-in-Charge
M&L for complete removal of old existing treatment/finishes on (G+3) bldgs providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust,greases,growth of fungus,algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer.(c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.(d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
Note : (i) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.
(vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart periodicals not used. (viii) Proper masking arrangement shall be carried before the application of primer or paint. (ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (x) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.
GAYATRI ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .