REPAIRS/MAINT OF EXTERNAL WATER DISTR PIPE LINES, VALVES AT MANKHURD, MAHUL, SEWRI AND THANE AND NTERNAL ELECTRIC SUPPLY, BLDG SECURITY LIGHT, WELL GLASS LED, FLAME PROOF AT BCF SEWRI AND JEREKENE FACTORY WADALA UNDER GE(NW) MANKHURD

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and not exceeding 10 sqm on plan and getting out in hard/dense soil for laying of cables, etc. complete all as specified and as directed.

-ditto- all as per item no 1 above but soft/loose soil.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm deep as in hard/soft soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil including spreading in low lying area and leveling complete all as specified and as directed.

M&L for cutting existing road/hard standing not exceeding 45x50 cm in wide & depth getting out excavated material for laying GI tube, returning filling & well rammaing watering finish suraface 10 cm from top including provision of PCC 1:3:6 for repairing, including removal of surplus soil all as directed.

M & L for PCC 1:3:6 in round/ square shape as per site requirement of thickness not less than 3" suitable for fixing of cast iron tank cover complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning and setting aside for refixing or as schedule of credit, etc complete all as specified and as directed for the 20 mm bore pipes including necessary staging/scaffolding as required.

Ditto all as per item No 7 above but 25 mm dia bore complete

Ditto all as per item No 7 above but 40 mm dia bore complete

Ditto all as per item No 7 above but 50 mm dia bore complete

Ditto all as per item No 7 above but 80 mm dia bore complete

Ditto all as per item No 7 above but 100 mm dia bore complete

Taking up or down steel water tubing 15 mm bore and connections including cleaning for re-fixing or removal.

-Ditto- all as per item No 13 above but 20mm bore

-Ditto- all as per item No 13.00 above but 25mm bore

-Ditto- all as per item No 13.00 above but 40mm bore

-Ditto- all as per item No 13.00 above but 50mm bore

M & L for relaying/fixing old pipe obtained from demolition/taking down including cutting out damaged ends and rethreading for fixing with and including new fitting complete of 25 mm bore including necessary staging/scaffolding all as specified and directed.

Ditto all as per item No 18 above but 40 mm dia bore complete

Ditto all as per item No 18 above but 50 mm dia bore complete

Ditto all as per item No 18 above but 80 mm dia bore complete

Ditto all as per item No 18 above but 100 mm dia bore complete

Supply & Laying fixing, connecting and testing steel water tubing, medium grade, galvanised, with screwed and socketed joints, in any length, including supply and fixing all fittings, fixed to walls or laid in trenches / floors etc complete all as specified and as directed for the 20 mm bore, ISI marked. Make-: Tata/ Jindal/ BST/ Oswal

Ditto all as per item No 23 above but 25 mm dia bore complete

Ditto all as per item No 23 above but 40 mm dia bore complete

Ditto all as per item No 23 above but 50 mm dia bore complete

Ditto all as per item No 23 above but 80 mm dia bore complete

Ditto all as per item No 23above but 100 mm dia bore complete

Supply and fix ISI Marked UPVC Pipe size 50 mm nominal dia,pressure pipe Schedule 80 with all connected acessories like UPVC bend,Tees,Unions,Sockets etc for each 3 mtr length of Pipe & solvent to join it all as specified and as directed. Make:Supreme/Dutron/Finolex/Duplon

Ditto all as per item No 29 above but 40 mm dia bore complete

Ditto all as per item No 29 above but 25 mm dia bore complete

Supply, lay/fix, connect and testing DI water tubing of 80 mm bore with spigot and socket ends class K-9 conforming to IS:8329/2000 suitable for rubber tyton joint including taking out old damaged CI main with fitting burning out joints and recovering lead complete etc as specified and directed.

Ditto all as per item No 32 above but 100mm dia bore complete

Ditto all as per item No 32 above but 150mm dia bore complete

Ditto all as per item No 32 above but 200mm dia bore complete

M & L for DI fittings class K-12 conforming to IS:9523/2000 upto 200 mm dia of any type, size, such as bend, tapper, tail piece, tee piece, cross etc complete all as specified and directed.

S&F in repairs gunmetal gate or globe valve for 50 mm dia, conforming to IS-778, ISI marked, with iron wheel head screwed at both ends for iron pipes or ferrule and fixing including necessary fittings like unions, check nuts, etc and any addition / alteration required for fixing, complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 37 above but 40 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 37 above but 25 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No 37 above but 20 mm dia bore complete. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Taking out sluice valves of size 80 mm to 100 mm and transporting to workshop for lathe work by refacing, regrinding, metalling and refixing back at site to match with standard size and refixing in position including replacing of worn out gland packing/washers /nuts/ bolts etc for the following size sluice valves. Note : Rate quoted is inclusive of cost of spare parts.

Ditto all as per item No 41 above but for size 150 mm to 200 mm dia bore complete.

S&F sluice valve 80 mm bore, cast iron body, flanged and drilled end, conforming to IS-14846, ISI marked, Class PN 1.6 including all joints with rubber or fibre board, gaskets, bolts and nuts, washers, iron wheel including taking up / down old unserviceable valves from any position and any addition / alteration for fixing required complete all as specified and as directed. Make-: Kartar/ Kirloskar/ Upadhyay

Ditto all as per item No 43 above but 100 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay

Ditto all as per item No 43 above but 150 mm dia bore complete. Make-: Kartar/ Kirloskar/ Upadhyay

M&L for run lead joints to CI spigot and socket pipes of 80 mm bore and fittings including cleaning the joints, re-aligning the pipeline properly as required, cocking and jointing with old pig lead, including any addition / alteration for fixing required, testing pipelines for any leakage, making good any disturbed / damaged pipeline / parts etc, complete all as specified and as directed Note-: Necessary excavation and earthwork will be measured and paid separately

Ditto all as per item No 46 above but 100 mm dia bore complete

Ditto all as per item No 46 above but 150 mm dia bore complete

Supply and fix display boards of 3 mm thick Acrylic sheet of size 0.50 mtr x 0.4 mtr, showing machine details / specifications of pumpsets all as specified and as directed by Engr-in-charge.

Supply and install of installation display board of size 4'' x 3" made out of ECO printing lamination and mounting on ACP sheet board with back side MS channel frame and MS 2 pole 50mm square pipe with black paint, including PCC foundation complete all as specified and directed. Note-: Detail to be writing on board shall be as per site/ installation requirement.

Fabricate supply and fix valve chamber covers made out of suitable size MS angle/MS plate/flat/rod,hinges, locking arrangement including painting with two coats of synthetic enamel paint over one coat of red oxide primer including removing existing unserviceable rusted cover all as directed.

M & L for Valve chamber of size 900 X 900 X 900 mm including necessary earth work in any type of soil, PCC foundation D-2 1:3:6 in base concrete, brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in CM 1:4, 6 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made-out of 40 X 40 X 6 mm MS angles complete with 2 coats of synthetic enamel paint over one coat of red oxide zinc chrome primer on all metal works including dismenteling the existing valve chamber complete necessary excavation earth work all plastered surfaces of valve chambers complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement ladder height 10 feet max, steps on every 01 feet made of angle iron of size 50x65x5 mm thick for sump including taking down old rusted iron ladder complete all as specified and directed.

Dismantling existing PVC water storage tanks and Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) of 500 Litres capacity with and including covers, hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes etc complete all as specified and as directed Make-: Sintex/ Reno/ Plasto

Ditto all as per item No.54 above but 1000 litres capacity

Ditto all as per item No.54 above but 2000 litres capacity

Ditto all as per item No.54above but 3000 litres capacity

Dismantling of existing PVC water storage tank covers and Supplying and fixing PVC tank cover round shape of suitable size as per ground requirement with locking arrangement and fixed in position etc complete all as specified and as directed

Supply and fix in repair 50 mm bore PVC Ball valve ISI marked high presssure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. Make -: Prayag/Shakti

Ditto all as per item No. 59 above but 40mm dia bore complete. Make -: Prayag/Shakti

Ditto all as per item No. 59 above but 25mm dia bore complete. Make -: Prayag/Shakti

Ditto all as per item No. 59 above but 20mm dia bore complete. Make -: Prayag/Shakti

M& L for draining out water complete cleaning & removing accumulated sludge/ dirt, scales from bottom of walls/ ceiling /top of slab and from mouths of circulating pipes of service tanks/ PVC tanks of capacity not exceeding 500 litres, located on roof of bldgs and disinfecting the tank using bleaching powder to make the tank bacteria free and depositing the rubbish in low lying areas of defence land, writing by stencil date of cleaning of tank with white synthetic enamel paint on black ground " cleaned on (date) due on (date) complete all as directed.

All as per item No 63 above but capacity of tank exceeding 500 litres but not exceeding 1000 ltrs complete.

All as per item No 63 above but capacity of tank exceeding 1000 ltr but not exceeding 2000 litres complete.

M&L for cleaning of balancing tank of swimming pool of capacity 1,00,000 ltrs, from bottom and side walls by scrubbing with wire brush and removing mud collected at the bottom all as directed by Engr-in-charge.

Supply only Bleaching powder grade -I ISI marked having stable available chlorine % by mass minimum 35% as per IS 1065,1971 and packed in 25 Kg bag complete all as specified and directed. Make : Vikram or equivalent as approved by GE.

S&F in repair wooden base brush of size 92cm x 7cm x 4cm suitable for suction sweeper assembly, with nylon hair brush with bristles of length 7cm and 1mm dia each complete all as specified and directed by Engr-in-charge.

M&L for petty repair work by replacement of fittings such as elbow,socket,tee etc including any addition/ alteration in existing line and depositing the complaint slip in complaint cell after user signature complete as per directed by engineer in charge.

Taking out old/ unsv cast iron/ MS tank cover from RCC tank including dismatlling of RCC base support/ MS or cast iron frame and supplying & fixing cast iron tank cover in round shape of size 21 inches internal dia, with proper anchor in PCC with nut, bolts, anchor fastner etc with locking arrangement etc complete with two coats of black bituminous paint (drinking grade) for 1000 ltr/ 2000 ltr/ 3000 ltr all as specified and as directed Note-: Plastering and PCC work shall measured and paid seperately

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces cement plaster 1:6, all as specified and directed.

Supplying, fixing, jointing and testing non-return valve suitable for GI tubing of size 80 mm bore size, (ISI Marked) both ends flanged and drilled for jointing including two flange joints and jointing material such as nuts, bolts washers rubber packing etc including taking down complete all as specified and as directed. Make :- Kirloskar, Upadhaya , Leader, Zoloto.

Ditto all as per item No. 72 above but 50 mm dia bore complete all as specified & directed.

Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 40 mm bore complete all as specified & directed. Make :- Leader, Zoloto

Supplying, fixing, jointing and testing non-return valve (Forged brass swing type check valve) suitable for GI tubing of size 25 mm bore complete all as specified & directed. Make :- Leader, Zoloto

S & F foot valve of size 80 mm dia cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conformimg to relevant IS, ISI marked, including all joints, gaskets, bolts and nuts, washers, including taking up/down old unserviceable valves from any position and any addition/alteration for fixing required complete all as specified and directed by the engineer in charge. Make : Kirloskar or equivalant or as approved by GE.

S & F in repairs foot valve of 150 mm bore, in cast iron body, ball type, with flanged and drilled ends and synthetic rubber coated MS ball, conformimg to relevant IS, ISI marked, including all joints, gaskets, bolts and nuts, washers, including taking up/down old unserviceable valves from any position and any addition/alteration for fixing required complete all as specified and directed by the engineer in charge.

Supply and fix 63 mm dia 15 mtr long hose canvas non percolating type conforming to IS 636 complete with male and female coupling conforming to IS-903 complete all as specified and directed.

Supply only calcium based granular disinfectant for water treatment, available Chlorine 60% to 70% by weight of the compound as per manufacturers instructions and packed in 45 Kg plastic drums complete all as specified & directed. Make :- Aquafit / Declibac

Supply and Fix in replacement of Contactor Three Pole 415 volts 25 Amps AC 3 Rating, Conforming to Type MNX 25 & Cat No - CS94110 of L & T or Equivalentt from Schnider Electric, ABB including add on Blocks suitable for driving POWER Capacitors, including making addition/Alternation to existing Wiring/circuit system

All as per item No 80 above but Contactor Three Pole 415 volts 32 Amps AC 3 Rating Conforming to Type - MNX 32 & Cat no - CS94111 of L & T or equivalent from Schnider Electric, ABB/ C&S

All as per item No 80 above but Contactor Three Pole 415 volts 40 Amps AC 3 RatingConforming to Type - MNX - 40 & Cat no - CS94190 of L & T or equivalent from Schnider Electric/ABB/ C&S

All as per item No 80 above but Contactor Three Pole 415 volts 50 Amps AC 3 Rating Conforming to Type -MNX - 50 & Cat no CS-97075 of L & T or equivalent from Schnider Electric/ABB/ C&S

All as per item No 80 above but Contactor Three Pole 415 volts 70 Amps AC 3 Rating Conforming to Type - MNX - 70 & Cat no - CS-97076 of L & T or equivalent from Schnider Electric/ABB/ C&S

Lifting the submersible pump of 05 Horse Power from bore well,including flange/socket joints of delivery pipe, dismantling the flanged joints, lowering the submersible pump after repairing, by tightening the flanged/socket joints of column pipe, re-fixing of existing safety bucket with steel rope including taking down to workshop & rewinding and complete to make it operational /functional all as per specified and as directed.

Dismantling the Centrifugal pump/monoblock pump of 40 HP capacity, cleaning, repairing, overhauling replacement of all unserviceable parts, nut, bolts, impellars, bushes, thrust bearing, clutch system, bowl assembly and repairing/replacement of pump shaft and re-assembling, commissioning and testing to make it operational / functional complete all as specified and as directed.

Ditto all as per Item No 86 But 25 Horse Power

Ditto all as per Item No 86 But 15 Horse Power

Ditto all as per Item No 86 But 10 Horse Power

Ditto all as per Item No 86 But 7.5 Horse Power

Ditto all as per Item No 86 But 5 Horse Power

M & L in repairs for servicing of Centrifugal pump set of capacity 25 HP by opening end covers, greasing the bearings, replacing worn out nut, bolts, gasket, air release valve key, gland stuffing box male/ female set, Rubber bush and painting one coat of synthetic enamel paint, including writing/marking in 1" size letters SM & MES No. for the following capacity of pumps:-

All as per Item No 92 above but Pump set 20 HP

All as per Item No 92 above but Pump set 15 HP

All as per Item No 92 above but Pump set 10 HP

All as per Item No 92 above but Pump set 5HP

M&L for electric water pump (self priming) of capacity 0.5 HP, 220V, 50 Hz head range 06 to 24 m, insulation class B conforming to Crompton Mini force II commissioning and testing to make it operational / functional complete all as specified and as directed.

M&L for Repair of any type unserviceable starter suitable upto 10 HP motor Cat No - SS94351 of L & T complete all as specified and directed EIC. Make:- L&T / ABB / Legrand / Schneider.

M&L for rewinding of electric motor 25 HP 3 phase 50 Hz 415 volt of following capacities complete all as directed and specified as under: (a) Disconnecitng, dismantling existing burnt widning from motor and rewinding complete with super enamled copper winding wire of matching gauge including all insulation material such as PVC insulated sheet, cotton tape sleeves varnish etc. (b) Transporting electric motor including loading/ unloading upto wksp and back to site. (c) Re-installing the same at the orignal locaition with proper alignmenent connecting and testing on load. (d) Replacement 2 Nos ball bearing for each motor of existing size/model. Make- SKF/NBC/TATA. (e) Replacement of winding terminal plate with brass stus,/ nut, bolt washer.

All as per Item No 99 For Motor 20 HP Cap

All as per Item No 99 For Motor 15 HP Cap

All as per Item No 99 For Motor 10 HP Cap

All as per item No 99 for Motor 7.5/5 HP cap NOTE: Quoted rates shall be deemed to include one year warranty for motors after rewinding and commissioning.

Dismantling the Decrin Dozing pump, cleaning, repairing, overhauling replacement of all unserviceable parts, nut, bolts, impellars, bushes, thrust bearing, clutch system, bowl assembly and repairing/replacement of pump shaft and re-assembling, commissioning and testing to make it operational / functional complete all as specified and as directed.

M&L PVC Insulated unsheathed 4 sqmm 3 core & PVC round sheathed Multicore bright eletrolytic annealed aluminium conductor flexible industrial power cables for working voltage upto and including 1100 Volts. Make :RR Kable / Polycab / Finolex / Havells

M&L PVC Insulated unsheathed 6 sqmm 3 core & PVC round sheathed Multicore bright eletrolytic annealed aluminium copper conductor flexible industrial power cables for working voltage upto and including 1100 Volts. Make :RR Kable / Polycab / Finolex / Havells

M&L XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 16 sq. mm, 4 Core on walls, surfaces, cable ducts etc complete. Make :RR Kable / Polycab / Finolex / Havells

M&L XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 25 sq. mm, 3.5 Core on walls, surfaces, cable ducts etc complete. Make :RR Kable / Polycab / Finolex / Havells

M&L for provn of Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.5M below normal GL, connected to Galvanized earth strip 32x6mm upto 7.5 mtr with protection pipe by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 40mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 3 of SSR Pt-I 2009 specification.

Earthing complete with Galvanised Steel earthplate of size 60x60cmx6.3mm thick electrode and GI wire 4 sqmm dia as earth lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to earth wire 4 sqmm by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, including testing on completion (Rates inclusive of neccessary excavation in any type of soil, earth work, PCC pit, CI cover, funnel with watering pipe, suitable size of light grade GI Protection pipe for earth strip in ground etc. all as required at site for complete earthing).

S&F GI strip size 32 x 6 mm all as directed including welding brazing and taking down of old copper strips as required at site

Maint/Cleaning of Pump house stations inside and out side area and removing of creepers and vegetation raised along with water supply installation including surface dressing around the E/M installation not less then 3 mtr from out side fencing and removing the all waste material from site and Chemical spray inside and out side area of Sub station. Note:- T & P will be arreanged by contractor

Supply and Fixing industrial type pressure gause made out of SS 304 material, SS sipon shall be factory insulated with closed cell elastomeric insulation in tubing form, pressure gauses shall be factory fitted with a ball valve complete, all as specified and directed.

Collecting water sample in clean bottle from location as directed for testing of physical test, chemical test, as per IS-10500-1991 from any government recognized institute and submitting test report complete.

Supply only portable water from approved and authorised water point through water bowser to MES water supply installation at various locations under GE (NW) Mankhurd complete all as specified and directed by Engr-in-Charge. Note:- (a) Source of water supply shall be got approved before procurement of water.

Supply and fix in repairs/replacement of old unserviceable Cast iron tank cover with MS strip /flat iron framework with all necessary fixing and locking arrangement nuts,bolts all as per BMC standards any required alteration to the tank for fixing of new CI covers all as specified and directed by the Engineer -in-Chief of sizes:- 508mm dia. (weight of tank cover not less than 12 Kgs)

S&F in repairs the following component in existing LT Kiosks (Idoor/Outdoor) including disconnecting and taking down at different locations all as directed :- Voltmeter Digital type ,0-500 Volts of size 96x96mm.

All as per item No 117 but Ammeter Digital type of upto 400 amps capacity of size 96X96mm.

M&L in repairs Phase indicating lamp neon type complete with holder assy RYB phase complete.

M&L in repairs CT coils any capacity suitable for 1100volts, 50Hz, AC, supply complete.

Supply and adding Calcium hypo chlorite 65% -70% chlorine content granular based water disinfectent in sealed containers complete all as specified and as directed.Brands having pan india availability, acceptability & being manufactured /processed in open market termed as traditional products .The brands /makes must have certified by All India Institute of Hygenic & Public Health. Note-: The chemical shall be brought in three lot and period to be procured only before previous batch completed.

Drilling and taping cast iron water mains (in position) for branch connections 15 mm bore of the internal dia.

-Ditto- all as per item No 123 above but 20mm bore

M & L for preparation of old painted / unpainted surfaces of any description, including taking out of parts / components under painting (if required) from any position / location as listed hereinunder and applying one coat of epoxy paint (with colour code maintained as per relevant IS) including marking with flow directions (of approved colour) complete al as specified and as directed by the Engineer-In-Charge. Make:- ASIAN/BERGER/APCOLITE (a) Induction motors 25 HP/20 HP - 06 Nos. (b) Electric motors 10/7.5 HP - 03 No. (c) Sluice valve 100 mm dia. - 06 Nos. (d) Sluice valve 80 mm dia. - 06 Nos. (e) Electric Panel Board - 04 Nos

All as per item No 125 above but 80mm bore complete.

M&L for dismantling existing unserviceable sluice valve and supply and fix new sluice valve ISI marked IS-14846 PN 1.6 with iron operating wheel, flanged type rubber gasket, nut, bolts, washers, including any addition alteration. Fixing of new sluice valve of size 100 mm bore complete.

All as per item No 127.00 above but of 80 mm bore complete.

S&F in repairs electronic timers for star-delta starter three phase 415 volts including taking down old unserviceable starters complete.

S&F in repairs pressure gauge 4" dial 0-14 kgcm2. Make: Warrie / H-Guru / FIBIG

M & L for point wiring in repair with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly including taking down carefully copper/ aluminium point wiring and making good disturbed surfaces for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (a) One light/Exhaust/Ceiling fan point controlled by one switch.

(b) One 3 pin switch socket combination 5 Amps on the same board with other switches.

(c) One 3 pin switch socket combination 5 Amps, independent.

(d) One bell point controlled by one push button

All as per item No 131 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.

S & F in replacement with modular switch, 1 module, single pole one way 6 Amp conforming to IS:3854 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

S & F in replacement with modular switch, 1 module, single pole one way 16 Amp conforming to IS:3854 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

S & F in replacement with ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm

S & F in replacement with modular socket 6A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

S & F in replacement with modular socket 6/16A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

S & F in replacement with modular bell push switch, 1 module, single pole one way 6Amp ISI marked. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

S & F in replacement with modular electric bell ding dong, AC, 230V single pole.

S & F in replacement with modular stepped type fan regulator, 2 module, single pole one way ISI marked. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

Supply & Fixing in replace Retrofit LED lamp 7 Watts complete all as specified and directed. Make : C&S/Bajaj/Havells/ Philips.

Supply & Fixing in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. Make : Anchor/Kay Kay/Leader

Taking out old wooden/PVC board and disconnecting all electric connection from switches, board and S & F modular PVC Gang box, screwless, with silver border of 8 module for mounting of modular switches and sockets including blank plate for blank module. Make - Crabtree(Athena)/Anchor(Penta)/Legrand(Britzy)

All as per Item No- 146.00 above but of modular PVC Gang box, 6 module.

All as per Item No- 146.00 above but of modular PVC Gang box, 3 module.

All as per Item No- 146.00 above but of modular PVC Gang box, 2 module.

All as per Item No- 146.00 above but of modular PVC Gang box, 1 module.

S&F modular white cover plate with frame, 8 module.

S&F modular white cover plate with frame, 6 module.

S&F modular white cover plate with frame, 3 module.

S&F modular white cover plate with frame, 2 module.

S&F modular white cover plate with frame, 1 module.

Taking down unserviceable FTL/batten fittings with supply and fix LED batten fitting 20 Watt, 240V, 4ft CDL/NW comprises of extruded channel in thermally conductive material with decorative end cap and high translucent serration milky white diffuser of high optically efficient plastic FR grade. The luminaire is pre-wired with high efficiency electronic driver having operating voltage 140-270V, P.F >0.95, THD <20% and IP20 protected alongwith provision of two Nos of PVC box of size 75x75x20mm for mounting light fittings including ceiling rose. The contractor shall provide test certificate from authorized lab. Make of Light Fitting : Shakti/Bajaj/Philips/Wipro

Taking down unserviceable FTL/batten fittings with supply and fix LED integrated batten of 10 Watt 2ft LED give minimum output lumen 1150 lm, efficiency >110, CCT 4000/6500K, CRI >80, power factor >0.9, operating temperature 45 degree celcious, THD <20% of housing aluminium extrusion with LED dimension 603mmx22mmx36mm upto 50% energy saving. Make of Light Fitting : Shakti/Bajaj/Philips/Wipro

Taking out any type of fitting bulkhead/FTL and S&F 10 watt linear LED batten, 2 feet, aluminium extruded channel, powder coated with diffuser for glare free light, inbult motion sensor prewired with 25% dimmer illuminiuos in ideal time with all accessories including two nos of PVC box of size 75x75x20mm for mounting light fittings complete in common area and staircase. Make of Light Fitting : Shakti/Bajaj/Philips/Wipro

S&F in repairs MCB DB SPN conforming to IP 43 - IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distembering to the affetced to walls.

Taking out Old U/S and S&F in repairs MCB SPN, 32 Amp, 10 KA, 230 Volt.

Taking out Old U/S and S&F in repairs MCB, single pole, upto 20 Amp, 10 KA, 230 Volt.

Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. Model : Orient/Usha/Crompton/Havells/Bajaj/Polycab

Taking out unserviceable exhaust Fan and deposit to MES Store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. Make :- Havells/Crompton/Bajaj/Polycab/Usha.

Taking down deteriorted louvers and supplying and fix new louvers fixed type made out of 1.6mm GI sheet with horizontal ventilation, bending into shape of size 45cmx45cm (outer) with 20x3mm flat iron base of size 45cmx45cm complete by providing of fixing arrangement for louvers upto 5th floor of including rate all as specified and directed by Engr-in-Charge

S&F loop-in/loop-out box of outer size size 225mmx295mmx122mm made out of FRP(Hot moulded type) with weather proof canopy and locking screws along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box, duly fixed to to steel tubular/rail/PCC/RCC pole using 25 x 3mm aluminium clamp not less than, including suitable gland and lugs for connecting cable complete all as directed including dismantling old one. Make: Hensel/National/Sintex/Legrand

S&F in repair thermoplastic cable junction water proof boxes of 130x130x77mm, with metric knockouts for cable entry and suitable size of gland for 4 to 10 Sqmm cable out door type with clamp for mounting on pole complete all as specified and as directed. Make: Hensel/National/Sintex/Legrand

S & F cable PVC insulated, PVC sheathed, armoured, FRLS, 1100V grade, 2 core 6 sqmm stranded copper conductor electric cable laid on wall/ roof/ duct complete with proper saddling and connecting to DBs with glands including taking out existing unserviceable cable complete all as specified.

S&F in relplacement with new cable PVC insulated three core over all PVC sheathed 2.5 Sqmm stranded copper conductor cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC conduit not less than 20mm including taking out old one all as directed. Make of wire - Polycab/Plaza/Finolex/ Havells/L&T.

S & F junction box of size not less than 4x4 inch with connector encloser, 3 terminal/ PVC/ polycarbonate, isolated body including taking out old one.

S&F street light bracket bend to shape made as required of 40mm dia 1.0 mtr long GI pipe light grade fixed to pole/ Wall including M&L for fixing with the help of flat iron clamp of size 40x6mm two numbers with the help of nuts and bolts for fixing of street light fitting on the wall complete after taking out old U/S one all as specified and as directed.

Taking out Old, U/s one and S&F LED 30 Watts building street light in Aluminium PDC housing, toughened glass cover in IP66 protection with 3000 (k) including connecting light with three core copper wire from connector or ceiling rose. Make of Light Fitting : Shakti/Bajaj/Philips/Wipro/Jaquar

Supply and fix in replacement 9 Watt LED Bollard garden light fitting with efficient high output COB LED, pressue die cast powder coated housing with PC diffuser driver nut bolt ,washer base plate foundation 0.3 mtrx0.3 mtr x.40 mtr by PCC 1:2:4 type B-1 using 20mm grade stone aggegates of size including excavtion and earth work , provision of GI bend of size 50MM dia in the PCC for cable entry the fitting shall cvonform to Make of Light Fitting : Shakti/Bajaj/Philips/Wipro

Taking down ol U/s and Suply and fix New generation , post-top LED warm white light 25 Watt,energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light provision of GI bend of size 40 mm dia in the PCC for cable entry the fitting with nut bolts,washer all as specified and directed in EIC. Make:- HAVELLS/ PHILLIPS/ JAQUAR/ WIPRO.

Taking down old U/s and Suply and fix New generation , post-top for 360 degree indirect lights with IP 65 LED light 40W,energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light fitting with nut bolts,washer all as specified and directed in EIC. Make:- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO/ HAVELLS.

M & L for Flame proof Light point wiring with FRLS PVC insulated unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including Stove Enamlled steel conduit and accessories such as bend tee elbow(two way, three way,four way) junction box with cover fixed on wall / ceiling etc with neccessar fixing access complete for all as directed

S&F in repair flame proof WP rotoy switch/Isolator 230 volt 10 A double pole ON / OFF with cable termination box in LM6, including anchor fasteners complete for all as directed

Supply and fix in repairs flame proof LED Light fittings CIMFR certified LED flameproof wellness in die cast AI housing with heat resistance toughened glass GLAZE PRO LED Lights fittings 30 W . Recommendation for gas/Vapour group of IIA and IIB and Zone 1 & 2 IP65 pretected confirm to CAT No FWL1315-30-CDL of crompton or equivalent from Philips/Bajaj as approved by the GE.

S&F in replace of capacitor up to 2.5 mfd. Make:- Keltron/Epcos

S&F in Repairs/Replacement Ultra bright glass LED tube rod 20 Watts(Single/Double side connection), 230 volts with very high efficacy with G13 lamp holder including fixing arrangements and taking down old unserviceable tube rod complete. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

S&F in repairs Surface, hanging and wall mounted batten (Double side connection) suitable for LED tube 20/22 watts, 230 volts alongwith tube rod 22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply and fix in repairs SUPRA NEO-I LED Lights fittings 35 W wellglass in PDC Aluminium housing with finless design and exellent thermal management offering high durability and superior performance with energy saving and having efficacy of 110 Lm/W with provision of suitable fixing arrangement such as MS clamps,nut,bolts etc. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply install, test and commissioning of cubical type indoor type feeder pillar box of 0.5mx0.5mx0.4m platform mounted factory made totally enclosed dust and vermin proof (protection class IP-54, CPRI approved) front openable lockable hinghed door arrangement duly earthed complete made of iron angle 40mmx40mmx5mm thick frame work height 450mm from ground level duly painted with one coat of red oxide primer and two coat of stove enamelled paint and 2mm thick CRCA sheet duly painted with powder coated paint to all steel surfaces over outside and inside complete. The panel board shall be suitable for 415volt 50Hz 3 phase 4 wire system for two incoming and one out going with epoxy insulated type electolytr copper busbar of capacity 400 amp (RYB) LED type indicating Lamps RYB (Make:- ABB , L&T) and 250 Amps capacity FP, on load change over switch (Make:- L&T, ABB, Schnieder). Location : DG Room Rukmani & near existing change over switch.

M/s Mukesh Engineers

sapana enterprises