REPAIR REPLACEMENT OF TILING PLUMBING AND CERTAIN BR AND SUPPLY WORK UNDER GE I GOS

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L brick work with fly ash bricks, Straight or curved onplan exc 6m mean radius,built in 1:6 in cement mortar all as Specified and Directed

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete all as specified and directed

Supply only integral water proofing compound all as specified and directed.

M&L for preparation of newly plastered surfaces of wall applying two coat of white wash over a coat of primer all as specified and directed.

Dismanting of existing sunken floor treatment incl plaster and removal of all debris and M&L for water proofing treatment on existing sunken floor/wall with the following specification and sequence complete all as specified and directed by Engr-In-Chrg (a) Cleaning the internal surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical/manual means. (b) Removal of all surface Imperfections, protrusions ,loose concrete & filling of cracks using Dr Fixit Pidicrete URP Modified Mortar in the ratio Cement: Sand (1:4) and 5% by weight of cement. (c) Providing and making fillets at the junction of the walls and the slabs using cement mortar of 1:4 mix admixed with 5 % of DR. FIXIT URP by weight of cement. (d) Applying two coats of elastomeric compound viz beck bond WPC-30/Master coat IRC over one coat on neat primer i.e. Super latex of Dr Fixit/Master bond of Conchem. (e) Laying protection plaster 15mm, in CM 1:4 admixed with STP/DrFixit diproof LW@200 ml per bag of cement.

Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of sunken floor etc and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in Sub base flooring 100 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M/L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/light colour shade polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick on vertical surface of wall of size not exceeding 0.36 sqm,as in dado/skitting including 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for Non skid ceramic coloured tiles vertical surfaces area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm as skirting non skid ceramic tiles ncluding 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed.

Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 25 mm bore of pipe complete all as specified and directed.

Supplying and laying of 15mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings , fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Supplying and laying of 20mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings, fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Supplying and laying of 25mm bore dia, CPVC pipes SDR 11 & plain and brass CPVC SDR 11 fittings, fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed.

Dismantling PVC water tanks exc 250 ltr but not exc 500 ltr capacity and removing to store

Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M&L for cleaning of water storage tank of any capacity,size,type etc. mountred on roof incl removal of all vegetation if any, loose dirt and all other materials all as directed by Engr-in-Chrg

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts .

S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed.

S & F in repairs 20mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 125mm size complete all as specified and directed

S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Charge

S & F in repairs, vitreous china wash basin oval type, white, for fixing in shelves standard size inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Charge

S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Charge

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, incl 'P' or 'S' trap and plastic water closet seat, black, closed pattern with flat bottom and cover & MS chromium plated or aluminised hinging device, complete all as directed by Engr-in-Charge

S & F in repairs Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete.

S/F in repair CP health faucet with flex pipe and hand shover ,the length of hose 1.50 mtr fitted to the tap.complete all as specified

S&F in repair PVC Jet connector suitable for EWC all as specified and directed by Engineer-in-Charge.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S/F in repair CP 2 way bib cock. make as approved by GE complete all as specified

S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge

S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F as in repair glass shelf assembly consisting of 5.5mm thick sheet 12cm wide with chromium plated bracket guard railing 60cm long complete all as specified and directed

S&F as in repair cornner glass shelf of size 9"*9" shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws complete all as specified and directed.

S & F in repair LId of water tank capacity of 500/1000/2000 Ltrs including necessary cleats/clamps complete all as specified and directed.

S & F in repair LDPE waste pipe for WHB, sink etc. pipes of pressure rating 6 kgf/sq. cm complete.

S & F in repair 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors of 75 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or in floors of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

M&L for maintenance of Desalination plant including verhauling/Backwash & cleaning of the Desalination plant with Citric Acid and other chemicals as required including routine check up for require repairs of the Plant for the smooth functioning and to achieve desired output parameters and TDS not less than 100 ,complete all as specified and directed.

Supply & fixing 5 micron 20 inch long jumbo micon catridge filter complete all as specified and directed.

Supply and filling of lubricant in replacement ENGINE OIL multi-grade 20W40 complete all as specified and directed.

Discoonecting and Taking down Sand filter system from 20 TPD Desalination plant for removing old media of various sizes / type and cleaning completely inside vessels by using brushes , inspecte & rectify of any leakage by new technology method , checking of foundation / vibration , and Refixing in same position and also filling of new media for the following sizes / type including providing new pipe line / fittings of any type & size and operating system handle unit ,complete all as specified and directed. Note :- filter media will be paid under separate item

S&F Inlet network system to the Sand Media Vessel & Carbon Vessel to with stand the high pressure of the water flow of the system ,complete all as specified and directed.

S&F Distribution Outlet network system to the Sand Media Vessel & Carbon Vessel to with stand the high pressure of the water flow of the system ,complete all as specified and directed.

Supply only sand Filter Media of Sizes from 3/4,1/2,4/8, 8/16 &16/32 inch of mesh sizes as to achieive the desired out put parameters of the water ,complete all as specified and directed.

Discoonecting and Taking down Acivated Carbon filter system from 20 TPD Desalination plant for removing old media of various sizes / type and cleaning inside vessel completely by using brushes ,inspect & rectifie any leakage by new technology method , checking of foundation / vibration , and Refixing in same position and also filling of new media for the following sizes / type including providing new pipe line / fittings of any type & size and operating system handle unit ,complete all as specified and directed. Note :- filling of various sizes of Carbon filter Media will be paid and Measured separately .

Supply only Activated Carbon of existing size ,complete all as specified and directed.

S&F in replacement of RO membrane of suitable size as per existing Seawater membrane housing of max operating presure 1000 PSI (68 Bar) to achieve the desired output parameters ,complete all as specified and directed.

S&F in replacement Vitalac Coupling with nut & bolts size 25MM dia ,complete all as specified and directed.

S&F in replacement 'U' PVC ball valve of size 25mm dia ,complete all as specified and directed.

S&F in replacement SS Ball Valve 40MM Dia Including necessary fittings ,complete all as specified and directed.

Supply and fix in replacement of MCCB 4 pole , 415 V , fixed type 63 Amp panel mounting type ,with breaking capacity 16 KA AC, ,complete all as specified and directed. Make – CG/HAVELL’S/ L&T/C&S.

S&F Multiport Valve 65 NB with SM filter union along with connected fittings ,complete all as specified and directed.

M&L in repair mild steel work for angles supports clamps, fabricated from structural steel section including nuts,bolts, washers welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing of paint including taking out existing unserviaceble MS work of open well channel and MS ladder etc complete all as specified and directed.

M&L for dismantling of old dmaged/leaking distribution pipe lines network upto 15 mm dia, removing damage lines alongwith union, elbows,FTA, tees , , replaceent of defective broken pipe lines alongwith connected items for its statisfactory operation during working to with stand high pressure without any leakage vibration ,complete all as specified and directed.

All as per item ser no 92 but for 25 mm dia system

All as per item ser no 92 but for 40 mm dia system

All as per item ser no 92 but for 50 mm dia system

Su[pply , Installation ,testing and commisioning of 10000 LPH 17 kg/cm2 pressure pump set of high pressure plunger pump with motor of capacity 30HP Triplex Plunger Pump including dismantling the existing pump & motor complete all as specified & directed by Engr-in-Charge. MAKE : CRI /KIRLOSKAR or equivalent as approved by GE. Note: The UNSV pumpset will be deposited to the AGE E/M store yard.

Supply and fix in replacement of low/high voltage monitoring device 440 volts, 3 phase ,complete all as specified and directed.

Supply and fix in replacement of phase monitoring device 440 volts, 3 phase ,complete all as specified and directed.

Supply & fix in replacement of Dry run & over load protection with phase failure relay alongwith suitable CTS ,complete all as specified and directed.

Supply and fix in replacement of electronic adjustable cyclic timer ,complete all as specified and directed.

Supply and replacement contactor 16 Amps capacity 2 NO + 2 NC, AC 3 phase 415 Volts, 50 HZ , complete all as specified and directed.

All as per item No. 101 but for 25 Amps capacity.

M/s Bapujee Builders and Traders

R K Traders

M/s M M Engineering Systems

M/S JAGANNATH SASMAL

M/S.J.BIJAYA KUMAR PATRO

R J ENTERPRISES

M/S S. N. ENTERPRISES