8884/E8 REPAIR / RESURFACING OF ROADS IN PATCHES AND REPLACEMENT OF ROAD FURNITURES INSIDE DEPOT AREA AND RESIDENTIAL AREA AT NAD SUNABEDA, ODISHA

Amount

Material and labour in preparing old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Material and Labour for applying evenly a priming / tack coat with hot bituminous primer VG 10 at 5 KG per 10 Sq.m complete all as specified and directed by Engineer-in-charge.

M&L for Repair to potholes of any depth and n.exc 1.0Sqm each, including sweeping free from dust, mud, water, scoring sunken surfaces in roads, path, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal), and including applying evenly a priming / tack coat with bituminous primer using paving bitumen of viscocity VG 10 at the rate of 10kg per 10Sq.m, complete all as specified.

M&L for Bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5% binder content with paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using hot mix plant and mechanical paver complete all as specified. Note: If actual design mix covers less than 5.5% binder content, then rate of recovery of bitumen shall be as per rate in purchase voucher per KG for the purpose of adjustment. No adjustment shall be made if the design mix binder content is more than 5.5% complete all as specified and directed.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n.exc 400 sqm and n.exc 50mm deep and disposal of the same to a distance n.exc 250m complete all as specified and directed

M&L premix bituminous macadam using binder content (paving bitumen VG-30) of 4.5% (minimum) by weight of the total mix laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) using hot mix plant, laid to a required profile / level using mechanical paver and rolled to a uniform smooth surface with a power roller of 8 to 12 tonne complete all as specified and directed.

Material and Labour for Surface dressing not exceeding 15cm deep and getting out in hard/dense soil as in berms including uprooting of grass/spalings etc and removing rubbish to a distance not exceeding 50m complete all as specified

M&L for 100mm thick Moorum/red bajri filling brought from outside MD land spreading, levelling in layers not exc 25cm thick, well ramming and watering as required, as in road side berms complete all as specified and directed. Note: 10% (Ten percent) deduction shall be made from the quantity computed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M&L in repairs Delineator 600 mm long all directional retro reflected round delineator short made out of 18 gauge MS pipe of outer Dia 47mm, Delineator powder coated to have 200 mm wide high intensity reflective band of colour white and red. Reflective bands protected with welded wire mesh cage Greenlite CAT PART No. GPL 11-20 Make or equivqlent make of 3M/Dark eye/ Ace/Trafitronics/Lion/Automat or Equivalent MES approved make complete all as specified and approved by Engineer-in-Charge and fixing in cement concrete 1:2:4 type B1 by using 20mm graded stone aggregate with size of block 150mmx150mmx300mm deep including earth work excavation and removal of soil to a distance n.exe 50M complete all as directed by Engineer-in-Charge. Note : - The rate of PCC & earth work is included in this item and nothing shall be extra paid.

M&L Bi-Directional reflective road studs / Cat Eye of ABS Plastic body of dimensions 100 x 115 mm, having 30 degree micro cube corner spark glow reflector white / red / yellow fixing with nail and including taking down complete all as specified and directed. Note :- Cat eye shall conform to ASTm D-4280 and mort 7th from CRRI New Delhi and model ALEXIX-1402 or equivalent.

S&F in repairs Solar Road Studs having 3 LED of colours red/yellow to a side (total-06 Nos) housed in a tough pressure dia casted aluminium alloy of any size 120 x 130mm of height 20mm built in stem-nail 30 mm x 50 mm long for fixing with epoxy. LEDs, Solar - cells, battery & light sensor roof, system workable 2-3 days after full charge in 8-10 hours, Greenlite CAT No- GPL-03-01 Make or equivqlent make of 3M/Dark eye/ Ace/ Trafitronics/ Lion/Automat or Equivalent MES approved make complete all as specified and directed by Engr-in-Charge.

S&F in repairs Reflector round type.Dimension Dia: 144.5mm,Colour in Red, Amber or White. Make : Greenlite/ 3M/Dark eye/ Ace/ Trafitronics/ Lion/Automat or Equivalent MES approved make complete all as specified and directed by Engr-in-Charge.

S&F dual-directional speed-breaker having high intensity cube corner reflector firmly bonded to high impact resistant plastic body of colour yellow and black of size 250 x 345 x 50 mm (height) provided with 4 steel nails, shape of side body to have interlocking pattern to keep all speed breakers in a row and including taking down complete all as specified and directed. Make: Greenlite CAT No. GPL-07-06 or equivalent of 3M / Dark Eye / Ace / Trafitronics / Lion / Automat

S&F solar road delineator 4 LEDs of colour red / yellow housed in plastic body, LEDs, solar-cells, battery and light sensor well protected inside polycarbonate sheet; device protected with powder coated wire mesh cage, system mounted over 50 mm dia steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. System workable for 2-3 days (nights) after full charge for 8-10 hours and including fixing in PCC 1:2:4 type B1 with size of block 150 x 150 x 300 mm deep with necessary earth work excavation and removal of soil to a distance n.exc. 50 m and including taking down complete all as specified and directed. MAKE: Greenlite CAT No. GPL-13-01 or equivalent of 3M / Dark Eye / Ace / Trafitronics / Lion / Automat

M&L for Cautionary sign board size 600x600x600mm triangular with definition plate 500x200mm with prismatic grade retro reflective sheeting fixed over 3MM thick Aluminium composite material sheeting to back supported frame of 20x20x3mm angle iron duly powder coated with aluminium pop rivits supported over square MS pipe 47mm of 3metre length duly painted black and white along with GI nuts, bolts and washer. Make: Greens/Greenlite or equivalent all as specified and directed by Engr-in-Charge and fixing in cement concrete 1:2:4 with size of block 300x300x450mm deep including earth work complete all as directed by Engineer-in-Charge. Note:- The rate of PCC & earth work is included in this item and nothing shall be extra paid.

SMART ENERGY SOLUTIONS (BID ID -3092654)