REPAIR/MAINT OF INTERNAL WIRING ALONGWITH ACCESSORIES, LED FITTINGS, MCBS, DBS INCLUDING REPAIR TO ACS/DESERT COOLERS AT DGQA BADARPUR UNDER GE (AF) TUGHLAKABAD

Amount

Taking out old unserviceable point wiring complete with fitting/fixtures and M&L for point wiring complete for followings with 1.5 Sqmm (nominal area) PVC insulated, multi stranded, FRLS copper conductor cable unsheathed in and include PVC conduit with all fittings medium grade ISI Marked and PVC insulated FRLS copper conductor cable of size 1.5 Sq mm as earth wire, connected to common earth dolly suitable for mounting modular switches including modular metal flush boxes and modular face plate complete all as specified and as directed by Engr-in-charge. Notes: The works includes cutting of chases and making good disturbed surfaces and rate deemed to included in quoted rate. Makes - Cable- Finolex/Havells/Polycab, PVC conduit - Presto Plast/Kalinga/Plaza

One Light point controlled by one way switch

One fan point controlled by one way switch and fan regulator on same switch board

One 3 pin socket outlet point 5 Amp on same board

One 3 pin socket outlet point 5 Amps on independent board

M&L for bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 Sq. mm size complete all as specified and as directed by Engr-in-charge.

All as per item no (1) above but One 3 pin socket out let 15 Amps on independent board, with cables 4.0 Sq mm size and earth wire 4.0 Sq mm complete all as specified and as directed by Engr-in-charge.

Taking out old U/S sub main wiring of any size and type and M&L sub main wiring with multistranded FRLS copper conductor cable PVC sheathed in and including concealed in brick wall/RCC as per the site condition, providing suitable PVC conduit with two runs of 6.0 Sqmm and 6 Sqmm FRLS copper conductor as earth wire and connected to earth dolly all as specified and as directed by Engr-in-Charge. Note: The work includes cutting of Chassis and making good the disturbed surfaces.

M&L in replacement for modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L in replacement modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L in replacement modular switch 1 way 6 Amps 1 module, suitable for 230 Volts AC supply complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L in replacement modular switch 1 way 15/16 Amps 1 module, suitable for 230 Volts Ac supply complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for modular white cover plate with frame 2 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for modular white cover plate with frame 6 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for modular white cover plate with frame 8 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for modular metal flush box 6 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for modular metal flush box 8 module complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for ceiling rose 3 phase/PVC/ polycarbonate isolated body complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

S&F step type electronic fan regulator Modular type, single phase 220 V, one module type complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

S&F in replacement of Ding Dong Bell, single phase, 230 volt AC,50 HZ complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L in replacement, Batten holder Bakelite, AC, 220 Volts complete all as specified and as directed by Engr-in-charge. Make: Anchor or equivalent in Kinjal.

M&L Bell push, Modular type, one module suitable for 230 Volts AC supply complete all as specified and as directed by Engr-in-charge. Make:- Anchor Rider/Havells/ Legrand

M&L for switch piano flush type single pole one way 5 Amps complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

M&L for switch piano flush type single pole one way 15 Amps complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

M&L for Socket outlet, 3 pin 2 in 1 of 5 amps capacity complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

M&L for Socket outlet, 3 pin 2 in 1 of 15 Amps capacity complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

M&L for Switch socket combination 2 in 1 3 pin 5 and 15 Amps flush type complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

M&L for Switch socket combination 2 in 1 3 pin 5 amps flush type complete all as specified and as directed by Engr-in-charge. Make- Anchor/Plaza/Havells

Taking down old unserviceable Plug & Sokcet DB, M&L for distribution boards in sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and as directed by Engr-in-charge. Make : Havells/Legrand

Taking down old unserviceable MCB DBs and M&L for distribution boards in sheet metal enclosure for MCB's (D.B) 8 way (SPN) 200 Amps rated bus bar complete all as specified and as directed by Engr-in-charge. Make: Cat No- DHDPSHODRW08 of Havells or equivalent in Legrand

Taking down old unserviceable MCB DBs and M&L for distribution boards in sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) Double door type complete fixed with concealed on walls/on surface and matching with existing surface complete all as specified and as directed by Engr-in-charge. Make : Havells or equivalent in Legrand.

Taking down old unserviceable MCCB DBs and M&L for distribution boards in sheet metal enclosure triple pole and neutral vertical Loadline 415 Volts 8 way, IP 43 of metal door type complete with 100 Amps MCCB, Double door type complete all as specified and as directed by Engr-in-charge. Make- Legrand/Havells/L&T. Note- MCCB 100 Amps 4P will be measured in quoted rate by the contractor.

M&L in replacement for MCB 240 volts SPN 06- 40 amp 10KA breaking capacity, ISI marked complete all as specified and as directed by Engr-in-charge. Make Legrand/Havells/L&T/Indo Asian

M&L in replacement for MCB 240 volts SP 6- 32 amp 10KA breaking, capacity, ISI marked complete all as specified and as directed by Engr-in-charge. Make Legrand/Havells/L&T

M&L in replacement for MCB 415 volts TPN 63 amp 10KA breaking, capacity, ISI marked complete all as specified and as directed by Engr-in-charge. Make Legrand/Havells/L&T

M&L in replacement MCB 415 volts TP 40amp 10KA breaking, capacity, ISI marked complete all as specified and as directed by Engr-in-charge. Make Legrand/Havells/L&T

Taking out old unserviceable fitting and S&F wall mounted LED batten 18 watt 6500K, extruded polycarbonate for efficient heat dissipation & integrated electronic driver 230 Volt, AC, single phase, 50 Hz incl all accessories prewired including making necessary electrical connection with 3 core copper conductor and testing complete all as directed by Engr-in-charge. Make- Havells/Philips/C&S

S&F in replacement wall mounted LED batten 10 watt 6500K, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 Volt, including all accessories prewired including and making necessary electrical connection with 3 core copper conductor and testing complete all as directed by Engr-in-charge. Make : Havells or equivalent in Phillips/Wipro

S&F in replacement 2'x2' size LED panel lighting luminaire glare free illumination suitable for false ceiling (armstrong/Grid) fitting size 600x600x70 mm (LXWXH) of 42 watts capacity surface mounting with high brightness SMD LEDs complete including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make- Havells/Philips/Wipro

S&F in replacement of LED 12 watt 6500K (round type) recess mounted with opal diffuser slim, compact, auminum die cast edge lit panel and separate electronic driver with high brightness SMD LEDs complete including taking down old unserviceable fittings complete all as specified and as directed by Engr-in-charge. Make- Havells/Philips/Wipro

S&F LED lamp 9 watt suitable for B22 base complete all as specified and as directed by Engr-in-charge. Make: Havells or equivalent Wipro/Phillips.

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 1.5 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge. Make of cable - Havells/Finolex/Plaza

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 2.5 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge. Make of cable - Havells/Finolex/Plaza

S&F in replacement copper wire in wiring circuits as per site requirements PVC insulated single core 4 Sqmm 1100 volts grade multi stranded conductor complete all as specified and directed by Engr-in-charge. Make of cable - Havells/Finolex/Plaza

M&L for PVC flat twin core cable with aluminium conductor of size 10 Sqmm 2 core suitable for 1100 volts power supply complete all as specified and directed by Engr-in-charge.

S&F in replacement of maintenance free battery suitable for solar light fitting of 12 Volt, 42 AH with copper terminals for wire connection complete all as specified and directed by Engr-in-charge. Make:- Amron/Exide/Luminous

M&L in repalcement Street light for building IP 65 of 25 watts capacity LED type with high power LEDs fabricated with die cast aluminium housing suitable for general purpose lighting complete suitable for single phase, 230 V, AC, 50 Hz complete all as specified and directed by Engr-in-charge. Make- Havells/Wipro/C&S/Halonix

S&F in replacement surface mounting 1feetx1feet size LED panel lighting luminaire glare free illumination suitable for surface mounting square slim down light white, size 300x300x70 mm (LXWXH) of 18/20 watts capacity recess mounting with high brightness SMD LEDs completee including taking down old unserviceable fittings complete all as specified and directed by Engr-in-charge. Make- Havells/Philips/Wipro

Taking out by disconnecting/unscrewing all electrical connection of unserviceable post top light, M&L including testing of post top of 35 watts capacity suitable for 240 volts, 50 Hz single phase power supply, light, spun aluminium landscape luminaire with high power LEDs as light source complete with all standard accessories and complete all as specified and directed by Engr-in-charge. Make- Havells/Philips/Bajaj

S&F in replacement of electronic type static watt hour electrical energy meter tamper proof made out of poly carbonate casing of class 1.0 accuracy confirming to IS-13779 and CBIP technical report 88 suitable for LT single phase two wire AC 230 Volt 50Hz 5 to 30Amps with fully tamper proof low consumption LCD display backlit, LT RTC optical communication port with facility storage of data and for downloading of data as and when required including sealing of meters and writing of MES No etc. complete all as specified and directed by Engr-in-charge. Make : L&T/HPL India Ltd/Havells

Taking down carefully storage type 25 litre capacity water heater (Geyser) after disconnecting the inlet/outlet/vent pipes, electric/earth connections etc, cleaning of the body, inlet/outlet/vent pipes, leakage arresting of inner copper/steel tank by welding/brazing etc, reassembling the geyser by replacing gaskets worn out nuts, washers re-fixing the same in position, reconnecting all inlet/outlet/vent pipes electric/earth connections and carrying out testing leakages for proper functioning complete all as specified and directed by Engr-in-Charge for various makes of geysers. Note: Necessary spare parts like Non return valve, stop valve, bib tap/ PVC connection /Copper connections cable, glass wool, element, thermostat, storage tank, geyser assembly, indicator etc shall be measured and paid separately.

Supply and replace the heating element with ISI marked element of capacity 1.5/2.0 Kilo Watt, suitable for 230 volts, AC, 50 Hz single phase power supply of storage type water heaters of compatible type duly making all connections by replacing inter connecting copper conductor cables and removal of the old unserviceable element complete all as specified and directed by Engr-in-Charge.

S&F thermostat suitable for 25/35/50 litres capacity storage type water heaters of size 9/11 inch long with temperature range of 0-90 degree centigrade including removal of old unserviceable one complete all as specified and directed by Engr-in-Charge.

S&F check/non return valve gun metal of size 15mm bore with necessary GI fittings required at site including removal of old one complete all as specified and directed by Engr-in-Charge.

S&F in replacement of stainless steel assembly for housing the Heating element, 6/8/9 Holes type for 50/35/25 litres for storage type Geyser complete all as specified and directed by Engr-in-Charge.

S&F in replacement of stainless steel tank for 25 litres storage type Geyser with MS collar, as per existing pattern complete all as specified and directed by Engr-in-Charge.

S&F in replacement of glass wool for 50/35/25 litres storage type Geyser as per sample complete all as specified and directed by Engr-in-Charge.

S&F in replacement of safety valve suitable for storage type Geyser of capacity 50/35/25 litres as per sample complete all as specified and directed by Engr-in-Charge.

S&F PVC insulated 3 core copper conductor wire of size 2.5 Sqmm overall PVC sheathed including taking down old one complete all as specified and directed by Engr-in-Charge.

M&L for PVC insulated 3 core copper conductor wire of size 1.5 Sqmm overall PVC sheathed including taking down old one complete all as specified and directed by Engr-in-Charge.

M&L for replacement of polycarbonate Plug top of 15 Amps, 3 pin 240 Volts complete all as specified and directed by Engr-in-Charge.

M&L for indicator lamp suitable for 25/35/50 litres geysers as per the existing sample in green and red colour including taking down old one complete all as specified and as directed by Engr-in-Charge.

M&L for Preparation of old painted surface of Geysers and applying two coats of synthetic enamel paint with machine spray paint including writing the MES number on body of the Geyser duly taking down and refixing the connections, testing and commissioning after painting complete all as specified and as directed by Engr-in-Charge.

S&F PVC braided connection of size 15 mm dia , 18"/24" length with nuts suitable for Hot & Cold water connections of geysers complete all as specified and directed by Engr-in-charge.

Supply only teflon tape PTPE 12 metres long and 19 mm wide complete all as specified and directed by Engr-in-Charge.

Supply only bituminous self adhesive flashing tape of size 10 cm x 5 cm x 1000 cm long Heavy duty, silver or black in colour as per sample complete all as specified and directed by Engr-in-Charge.

M&L for dash fastener and screws suitable for fixing/hanging electric geysers of capacity upto 50 ltrs fabricated with bronze and having 10 mm bore and 150 mm long with internal nails all as per sample kept at AGE E/M office complete all as specified and directed by Engr-in-Charge.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, Pedestal Fans and air circulating fans etc, of any description, any sweep and from any position / locations, sealing cable end, for repairs / servicing / overhauling / painting / numbering etc and hanging / fixing the repaired fans in same position or at position as directed by Engr-in-Charge after, dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing, fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, connecting to existing electric sources with using new 1.5 Sqmm 3 core multistranded PVC insulated copper wire (FRLS) to required length and testing at site to the entire satisfaction of Engineer-in-Charge complete all as specified and directed by Engr-in-charge. Note: - (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item of Sch ‘A’ for rewinding. (iii) The rates for above items are deemed to include for transportation of fans to & from workshop if required and approved by the Engineer-in-charge for necessary repairs. (iv) Remetaling of motor shaft, polishing and grinding and making to standard size to matching with GM Bush shall be measured and paid for separately under appropriate item. (v) Writing of fan No. and painting of fans shall be measured and paid for separately under appropriate item of Sch ‘A’

Taking out & removing old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction including painting of fans of any description (ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan) with applying one coat of synthetic enamel paint (White/grey) by spray machine including preparation of existing decorated surfaces of fans including engraving / painting MES No. on fan in capital letters of height not less than 20 mm on fan body complete all as specified and directed by Engr-in-charge for the following Fans:- Make : Atlas/Finolex/Devi Dayal

Rewinding of motor of ceiling fans 1200/1400 mm sweep complete all as specified and directed by Engr-in-charge.

Ditto but rewinding of motor of exhaust fans of 225 mm sweep complete all as specified and directed by Engr-in-charge.

Ditto but rewinding of motor of exhaust fans of 300 mm sweep complete all as specified and directed by Engr-in-charge.

Ditto but rewinding of motor of exhaust fans of 350 mm sweep complete all as specified and directed by Engr-in-charge.

Ditto but rewinding of motor of air circulating fan/wall mounting fans of 400 mm sweep complete all as specified and directed by Engr-in-charge.

Supply only the following new parts suitable for the ceiling/ exhaust fans, wall bracket fans & pedestal fans, air circulating fans etc. of any description, any sweep:-

Supplying only ball bearing No 6201 complete all as specified and directed by Engr-in-charge. Make: SKF/NRB/NBC

Supplying only ball bearing No 6202 complete all as specified and directed by Engr-in-charge. Make: SKF/NRB/NBC

Supply only gun metal bushes of any description and size to suit existing motor shaft including remetaling grinding & polishing of fan motor shaft to required shape/size complete all as specified and directed by Engr-in-charge.

Supplying only capacitor of capacity 2.5 mfd (PVC body) complete all as specified and directed by Engr-in-charge. Make:-Philips/Usha/Bajaj/Surya

Supplying only capacitor of capacity 4 mfd (PVC body) complete all as specified and directed by Engr-in-charge. Make:- Philips/Usha/Bajaj/Surya

Supplying only armature shaft of fans of any description and in any position complete all as specified and directed by Engr-in-charge.

Supply only PVC canopy of any description and suitable for any type & any make of fan complete all as specified and directed by Engr-in-charge.

Supply only rubber real of suitable size of hanging assembly complete all as specified and directed by Engr-in-charge.

Supply only 450 mm long down rod 15 mm dia of MS tube light grade, factory made, painted & duly finished with powder coating of white colour, including necessary holes and threading etc complete all as specified and directed by Engr-in-charge.

Supplying and fixing in repairs capacitor of capacity 2.5 mfd (PVC body) in fans of any description and in any position complete all as specified and directed by Engr-in-charge. Make:-Philips/Usha/Bajaj/Surya

Supplying and fixing in repair capacitor of capacity 4 mfd (PVC body) in fans of any description and in any position complete all as specified and directed by Engr-in-charge. Make:- Philips/Usha/Bajaj/Surya

M&L in replacement of the exhaust fan motor for 225 mm sweep with all accessories and depositing into AGE E/M Store yard at Vayusenabad of old one complete all as specified and directed by Engr-in-Charge.

M&L in replacement of the exhaust fan motor for 300 mm sweep with all accessories and depositing into AGE E/M Store yard at Vayusenabad of old one complete all as specified and directed by Engr-in-Charge.

M&L in replacement of the exhaust fan motor for 350 mm sweep with all accessories and depositing into AGE E/M Store yard at Vayusenabad of old one complete all as specified and directed by Engr-in-Charge.

Taking down the old unserviceable exhaust fan from the existing position and M&L in replacement of exhaust fan of 250 mm sweep ventilating fan, speed 1350 rpm and power 60 watts suitable for 230 volts, 50 Hz and deposit the old fan into AGE E/M store yard at Vayusenabad complete all as specified and directed by Engr-in-charge. Make: Bajaj/Orient/Havells

Taking down the old unserviceable exhaust fan from the existing position and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers with all connected accessories and depositing old fan at AGE E/M store yard complete all as specified and directed by Engr-in-Charge. Make: Havells/Usha/Bajaj

S&F in replacement of new ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. five star rated with brushless direct current motor (BLDC) and taking down and depositing the old ceiling fan at AGE E/M store yard complete all as specified and directed by Engr-in-Charge.

M&L in replacement of wall fan of 450 mm sweep, 3 blade type, 1440 rpm, 80 watts with 3 speed rating suitable for AC supply, 230 volts, 50 Hz and deposit the old fan into AGE E/M store yard at Vayusenabad complete all as specified and directed by Engr-in-Charge. Make: Havells /Orient /Bajaj

Taking out the old unserviceable geyser from the existing position and S&F installation and testing of new Geyser of 25 litres capacity with copper inner tank, 5 star rating suitable for 230 Volts, AC supply, 50 HZ complete with all standard accessories depositing the old geysers at AGE E/M store yard at Vayusena bad complete all as specified and directed by Engr-in-Charge. Make: Havells /CG /Venus

S&F in replacement of PVC insulated with copper conductor of flexible wire of size 23/0.0076 twin core for connecting from fan to electric system complete all as specified and directed by Engr-in-Charge.

Disconnecting U/S burnt out rotary/reciprocating compressor from existing electric and pipe line connections of Refrigerator of 165 ltr to 270 ltr capacity of any make / location, transporting and replacing with new compressor including connecting suction and discharge lines by copper brazing, refixing capillary filter, pressure testing with the help of nitrogen gas and flushing out the oil in condenser cooling coil , establishing vacuumed for dehydration complete all as specified and directed by Engr-in-charge. Make : Godrej , Shreeram , Tecumseh , Emersion

All as per item no. 85 above but Water cooler of capacity 40 / 80 litres complete all as specified and directed by Engr-in-charge.

All as per item no. 85 above but Window / Split type AC of capacity 1.5 TR complete all as specified and directed by Engr-in-charge.

All as per item no. 85 above but Window / Split type AC of capacity 2TR complete all as specified and directed by Engr-in-charge.

S&F in replacement fan motor / condensor motor 230 Volts, 50 Hz, SP suitable RPM for water cooler of capacity 40 / 80, 60 / 120 and 60 / 150 litres including connecting / mounting brackets to base frame and testing complete all as specified and as directed by Engr-in-charge. Make : Usha , Modi , Signature , Bajaj

All as per item no. 89 above but of 230 Volts, 50 Hz, SP suitable for frost free refrigerator of capacity 165 to 270 litres complete all as specified and directed by Engr-in-charge.

All as per item no. 89 above but suitable for window type AC of capacity 1.5 / 2 TR complete all as specified and directed by Engr-in-charge.

All as per item no. 89 above but suitable for split type AC outdoor unit of capacity 1.5 / 2 TR complete all as specified and directed by Engr-in-charge.

S&F in replacement blower motor 230 Volts, 50 Hz, single phase 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.

Supply and charging only refrigerant gas of required HD i.e hydrocarbon, R-134a, R-22 or R-12 or any latest version suitable for Refrigerators of capacity 165 to 270 ltr capacity including cutting copper pipe and sealing by brazing etc after charging gas as required and leak testing complete all as specified and directed by Engr-in-charge.

All as per item no. 94 above but for Water coolers 40/80,60/120/150 ltr capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 94 above but for Window / Split type AC of capacity 1.5 TR capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 94 above but for Window / Split type AC of capacity 2 TR capacity complete all as specified and directed by Engr-in-charge.

S&F in replacement Condenser unit for refrigerator of capacity 165 to 270 litres of any model, type, size and capacity including testing including making all connections complete all as specified and directed by Engr-in-charge. Note: Gas charging shall be measured and paid separately

All as per item no. 98 above but for Water coolers 40/80,60/120/150 ltr capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 98 above but for Window AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 98 above but for Split type AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.

S&F in replacement Cooling unit for refrigerator of capacity 165 to 270 litres of any model, type, size and capacity including making all connections complete all as specified and directed by Engr-in-charge. Note: Gas charging shall be measured and paid separately

All as per item no. 102 above but for Water coolers 40/80, 60/120/150 ltr capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 102 above but for Window AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.

All as per item no. 102 above but for Split type AC of capacity 1.5/2 TR capacity complete all as specified and directed by Engr-in-charge.

M&L for Detecting gas leakage of refrigerators, water coolers, window/split/ pillar type AC's and creating vacuum, rectifying/arresting the leakages, testing for pressure drop, charging refrigerant gas in the unit to the required pressure complete all as specified and as directed by Engr-in-charge.

Supply & fixing in replacement running/starter capacitor 2.5/3.15/4.0/6.0 mfd, 250 volts, AC, from cooling appliances complete all as specified and as directed by Engr-in-charge. Make : EPCOS , Asian, Bajaj

All as per item no. 107 above but of 45 mfd 6 pin complete all as specified and directed by Engr-in-charge.

All as per item no. 107 above but of 50.0/6 mfd complete all as specified and directed by Engr-in-charge.

S&F in replacement thermostat suitable for window / Split type AC's, Water coolers, Refrigerators of any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Indofos, Johnson, Honeywell

S&F capillary & filter suitable for AC, water cooler, Deep freezer, refrigerator complete all as specified and directed as specified by Engr-in-Charge

S&F in replacement over load protector suitable for window / Split type AC's, Water coolers, Refrigerators and Deep freezers of any make, capacity and model and testing complete all as specified and as directed by Engr-in-charge. Make : Indofos, Johnson, Honeywell

S&F in replacement PVC pipe 32 mm dia for draining out waste water complete all as specified and as directed by Engr-in-charge

S&F in replacement Timer for refrigerator of existing specifications of any model, type, size and capacity complete all as specified and as directed by Engr-in-charge.

S&F in replacement Copper tube 1/4"/1/2"/3/8'/5/8' size, thickness greater than 0.7 mm complete for cooling appliances, of any model, type, size and capacity to suit the existing including connecting complete all as specified and directed by Engr-in-charge.

S&F in replacement Heater of any size to refrigerator of any capacity from 165 to 270 litres of any model, type, size complete all as specified and directed by Engr-in-charge. Make : Indofos , Denfos

S&F in replacement Fan blade of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make complete all as specified and directed by Engr-in-charge.

M&L in replacement Metal clad DP Plug Assembly AC, 220 V, 50Hz, suitable for MCB of capacity 20A, with 2 Pin and one earth pin complete all as specified and directed by Engr-in-charge. Make- Havells/Legrand

M&L in replacement Metal Clad DP Socket Assembly AC, 220 V, 50Hz, suitable for MCB of capacity 20 A, with 2 Pin and one earth pin complete all as specified and directed by Engr-in-charge. Make- Havells/Legrand

S&F in replacement with new display assembly of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make including testing complete all as specified and directed by Engr-in-charge.

S&F in replacement of front grill with air filter of window AC 1.5/2 TR of any make complete all as specified and directed by Engr-in-charge.

S&F in replacement with new Electronic card/ PCB of existing window / split type air conditioners of capacity 1.5 / 2 TR, from any position, of any make including testing complete all as specified and directed by Engr-in-charge.

S&F complete indoor unit of split type AC 1.5 TR in replacement of worn out unit Comprises of cooling coil, blower, blower motor, swing motor, swing blade filter, PCB, Thermostat etc complete all as specified and directed by Engr-in-charge. Make- Voltas/ LG

S&F complete outdoor unit of split type ac 1.5 TR in replacement of existing worn out indoor unit complete with outdoor fan motor, outdoor fan, condenser unit with cooling coil, copper/aluminium fins, wiring etc as per existing with connection for indoor and outdoor with copper tubing complete all as specified and directed by Engr-in-charge. Make- Voltas/ LG

Supply & fixing in replacement of old rusted desert cooler capacity 4000/5000 cum/hr made out of GI sheet 22 SWG complete with front panel and replacement of complete cooler body , U/S fan motor and U/S water Pump of approved make all as specified and as directed by Engr-in-Charge.

S&F in replacement of fan blade made of GI sheet of heavy duty for desert cooler for any capacity complete all as specified and directed by Engr-in-charge. Make : Anchor , Havells , Legrand

S&F in replacement PVC flexible rubber pipe 15 mm dia for desert coolers complete all as specified and directed by Engr-in-charge.

S&F in replacement Plug top 3 pin, 230 Volts, 6 Amps including testing complete all as specified and directed by Engr-in-charge. Make : Anchor , Havells , Legrand

S&F in replacement wood wool pad (set of 3 ) of suitable size to dessert cooler of capacity 3000 to 6000 CFM complete all as specified and directed by Engr-in-charge.

S&F in replacement of exhaust fan motor size 18" (450 mm sweep)copper wound for desert cooler for operation on AC single phase 230 / 250 volts 50 HZ 1440 RPM complete all as specified and directed by Engr-in-charge. Make:- Khaitan/ Universal /USHA

S&F in replacement Water pump, 18/20 watt , 230 Volts, 50 Hz, SP with discharge head of 1.87 m for desert cooler of any capacity complete all as specified and directed by Engr-in-charge. Make: Signature, Modi, Usha

M&L for preparing the surfaces by scrapping out the old paint and painting with two coat of painting of synthetic enamel paint (Nerolac) inside & outside surface and applying two coats of rubber seal paint inside water tank to desert cooler capacity upto 5000 cum/hr by spray painting including rewriting MES/SM NO. complete all as specified and directed by Engr-in-charge.

M&L in replacement of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6, type C1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt oacked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I complete all as specified and directed by Engr-in-charge.

M/S Rohit Enterprises

M/S S.K.Electricals

R R Associates

AASHIANA CONSTRUCTION COMPANY