PROVN OF GAURD ROOM ALONGWITH TOILET AND BATHROOM UNDER AGE B/R II AT GE JHANSI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out hard/dense soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard/dense soil, complete all as specified and directed.

M&L for pre-construction ATT for treating the backfill the top surface in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed

M&L for pre-construction ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

M&L for pre-construction ATT for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M&L Type D-2 1:4:8 ( 40 mm Aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed

Use and waste of formwork for foundations, footing, bases of columns and plinth beam etc. for flat rough finished surfaces of concrete complete all as specified and directed

Use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of complete all as specified and directed

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

M&L for RCC M-25 (design mix) using 20 mm garded stone aggregate as Foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-25 (design mix) using 20 mm garded stone aggregate as in columns complete all as specified and directed

M&L for RCC M-25 (design mix) using 20 mm garded stone aggregate as in Roof beams complete all as specified and directed

M&L for RCC M-25 (design mix) using 20 mm garded stone aggregate as in Roof Slab supported on walls complete all as specified and directed

M&L for RCC M-25 (design mix) using 20 mm garded stone aggregate as in chajja complete all as specified and directed

M&L Rendering 10mm thick in cement mortar 1:6 on INTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L Rendering 15mm thick in cement mortar 1:4 on EXTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for brick work with fly ash modular bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for half brick thick wall with fly ash modular bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces like soffit of RCC slab/ceiling, chajja etc finished surfaces even and smooth, without extra cement complete all as specified and directed

Supply only liquid water proofing compound

S&F powder coated aluminium window shutter Sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55Kg/M of three channel including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire gauze including necessary locking arrangement and handle etc; complete all as specified and directed. (Note. Rate is deemed to be inclusive of 4mm thick glass panes and stainless steel wire cloth required).

S&F powder coated aluminium ventilator louvered type with frame , aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, etc complete all as specified and directed.

S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars railing and similar works conforming to Fe 290. Gde-E165 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil ccomplete all as specified and directed

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L Hardcore (Broken stone) of guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub-base, complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. {Note:-Rate is deemed to be inclusive of materials against forming & filling of joints complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of cement based primer, complete all specified and directed

M&L for preparation of new plastered surfaces of walls applying two coats of distemper oil bound white of any tinted over a coat of primer over and including 1 mm thick layer of JK/ Birla White wall care putty on wall for getting smooth and even finish of surfaces, complete all as specified and directed

M&L for prepared on of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-S complete all as specified and directed

S&F 35 mm thick 2nd class hard wood, plain framed paneled shutter (any number of panels) with panel of timber flat on both side (feather edged) or of veneered particle board medium density, particle board with commercial face veneers complete all as specified and directed

M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F 200mm mils steel barrel tower bolts, stove enameled black, with bright bolt, complete all as specified and directed.

S&F 125 mm mild steel pressed handles over type stove enameled black, complete all as specified and directed.

S&F mild steel sliding door bolts 300mm plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply only 3mm thick figured glass, pinheaded type in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S & F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone, complete all as specified and directed.

All as per item here-in-above but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM 1:3 complete all as specified and directed.

M&L for Non skid ceramic colored tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed.

M&L 18-20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. (Note:- granite in one picece to be used for treads in step with nosing at front and two no of grooves)

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 15mm bore concealed stop cock CP type with long shank and cup screwed down high pressure with crutch or butterfly handle screwed for iron pope or union complete all as specifed and directed

S&F for 15 mm bore angle cock CP fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15mm bore body bib tap fancy cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule complete all as specified and directed.

S & f for 15mm dia pillar taps fancy cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule cast copper alloy type complete all as specified and directed.

S&F for Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F for of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in cement concrete bedding and making good of floor surface, complete all as specified and directed.

S&F for PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed.

S&F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Blank in toto

Blank in toto

M&L for 75 mm dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all specified and directed.

Supply and fix PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

Supply and fix shower rose of PTMT any colour for fixing with 150 mm pipe swivel type fixed to GI pipe complete all as specified and directed.

S&F grating square 100 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F 32 mm bore waste coupling of PTMT (half of full thread) (Min weight 45 gms each) complete all as specified and directed.

S&F tubular towel rail 20 mm dia 600 mm long brass CP including brackets complete all specified and directed.

S&F bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed.

M&L for 100 mm butt hinges stainless steel medium weight complete all as specified and directed.

S&F 125 mm aluminium alloy handles, cast type anodisedcomplete all as specified and directed.

S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed.

S&F 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type , having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

M&L for the non accessible roof top surface of concrete and providing water proofing treatment to roof slab with APP based modified polymeric membrane centre core 100 micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3 kg/sqm with 100mm overlap laid as per manufacturer's instructions over an dincluding 10mm thick plastering in CM 1:4 with WPC will be applied over the roof slab when concrete is green. After plaster is cured, complete all as specified and directed by Engineer-in-charge with following courses of description below :- (a) Applying evenly a coat of bituminous primer confirming to IS-3384-1965 @ 0.40 kg/sqm on prepared surfaces till the surface is properly impregnated. (b) Second coat of bonding material using blown grade bitumen 85/25 conforming to IS-702 @ 1.20 kg/sqm (c) third course is laying APP based modified membrane described hereinbefore with 100mm overlap in longitudinal direction and 100mm in tranverse direction, all joints and changes in all directions should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (d) Fourth coat of bonding materials using blown grade bitumen 85/25 confirming to IS-702 @ 1.20 kg/sqm (e) Apply a coat of bituminous aluminium paint @ 0.20 kg/sqm.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and shaping the edging of paver blocks with cement concrete 1:2:4 type B-1 usinf 20mm graed stone aggregates complete as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges as directed

M&L for cement concrete in foundation filling and mass concrete type C2 1:3:6 (40 mm graded aggregate) complete all as specified and directed

M&L for Brickwork with fly ash bricks, old size straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

M&L for 10 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

Providing and fixing SFRC (Steel fibre Reinforced Concrete) cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter confirming to IS-12592, total weight of cover and frame not less than 182 Kg fixed in cement concrete 1:2:4 type B-1 using 20mm garded stone aggregate complete all as specified and directed

M&L DWCPE(SN8) 200 (OD)/175(ID)mm complete laid in trenches including earthwork, removal and return filling and jointed including testing alongwith necessary jointing material tees/ union / socket etc complete laid on PCC beed 150 mm thick PCC in 1:2:4 type B0 of avg depth 2.0 m including packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 and as directed

M&L for conventional LLDPE septic tank conventional designed to carry sewage and sullage water, including excavation, returning filling in and removal, etc in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 30 User complete all as specified and directed

Construction of Soakage wells including excavation, returning filling in and removal, etc in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes ofsize 1.80 M dia X 3.00 M deep.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling over and including a layer of 1 mm thick wall care putty, complete all as specified and directed

Supply, laying and fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 sq mm 2 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :-

One light point/ceiling fan/exhaust fan controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per item No. 101.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm FRLSH copper wires.

M&L for submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Marked conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc and directed by Engineer-in-Charge. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length

S&F of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F Fan step regulator, 120W - 2 module, 240V, 50Hz ISI marked with valid CML complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

Supply and fix of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW Capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece and flexible PVC connection pipe 450 mm long suitable for Hot/Cold water application etc.

S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value more than 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers etc complete.

S&F LED Tube light fitting batten type 20W, 230W, efficiency 120 Lumens per watt, colour temperature 6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account. (ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase. (iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fix of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed.

Supply and fix of MCB distribution board, SPN, 8 way, 230 V, 1 phase, AC with MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately.

All as per item No. 118.00 here-in-before but SPN, 4 way, 230 V, 1 phase, AC Note: MCBs shall be measured and paid separately.

Supply and fix of MCB 40A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

Supply and fix of MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

M&L for earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connecting to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (i) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe, earth wire up to 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (ii) Contract must ensure earthing test result less than 5 Ohm and submitted test report to Engr-in-Charge.

m/s ramesh saran agarwal (BID ID -3471949)

M/sDaljeet singh keer (BID ID -3471610)

M/S S K AGARWAL (BID ID -3472172)

HARNAM SINGH ANIL SINGH (BID ID -3471979)

M/s Jagdish Chandra Arora (BID ID -3468247)

A K ENTERPRISES (BID ID -3471883)