NIT No GE/ND-51/2025-26

Amount

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits/ casing caping and making good the disturbed surface of wall/ floor complete to match with the existing surface/ finishes complete all as specified and directed by Engg in charge.

M&L for Point wiring for one light/ ceiling fan/ exhaust fan point controlled by one, one way 6 Amp switch with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and new non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/ paint/ distemper) wherever required (as per the existing condition) complete all as specified and directed. Note: The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes and blank plate if required shall be deemed to be included in the unit rate. Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex

All as per item No 02.00 above but for one bell point controlled by one, one way 5 Amp switch complete all as specified and directed.

All as per Item No 02.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed.

All as per Item No 02.00 above but for One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed.

All as per item No 2.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge. Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex

S&F in replacement submain wiring alongwith earth wire with 2 run of 1.5 Sqmm (Main Cable and neutral) and one run of 1.5 Sqmm as earth wire of FRLSHPVC insulated copper conductor, single core cable drawn through existing rigid PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/polycab /GLOSTER / FINOLEX

S&F in replacement submain wiring alongwith earth wire with 2 run of 2.5 Sqmm (Main Cable and neutral) and one run of 2.5 Sqmm as earth wire of FRLSHPVC insulated copper conductor, single core cable drawn thro.5ugh existing rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/polycab/GLOSTER/FINOLEX

S&F in replacement flexible wire twin core white color having copper strand complete all as specified and directed.

S&F in replacement of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed. Make : Anchor/Havells/Goldmedal/Panasonic/indoasian

S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make : Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make :Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed. Make :Indoasian or Equvalent to Anchor/Havells/Goldmedal/Panasonic

S&F in replacement modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed. Make: Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement switch piano flush button single pole one way 6 amps complete all as specified and directed. Make: Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement switch piano flush type 15 amps single pole one way complete all as specified and directed. Make: Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and directed. Make: Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and directed. Make: Indoasian/Anchor/Havells/Goldmedal/Panasonic

S&F in replacement piano type bell push 6A with Neon 1 module 240 volts complete all as specified and directed. Make: Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and directed by Engr - in - Charge. Make : Indoasian/Anchor/Havells/Goldmedal/Panasonic

S&F in replacement electronic fan regulator modular type 120Watt step type Double Modular as per existing complete all as specified and directed. Make : Indoasian/Anchor/Havells/Goldmedal/Panasonic

S&F in replacement DIMMER/ STEP type electronic fan regulator flush type 230 volts complete all as specified and directed. Make : Indoasian/ Anchor/Havells/Goldmedal/Panasonic

S&F in replacement electric bell Ding-Dong AC 230 Volt complete all as specified and directed by Engr-in-Charge. Make : Indoasian/Legrand/Havells

S&F in replacement Sheet Metal enclosure with plug top & MCB single pole, 20 Amps 240 volts complete all as specified and directed. Make: Indoasian/Legrand/Havells

S&F in replacement modular AC box with plug top & mini MCB single pole, 20 Amps 240 volts complete all as specified and directed. Make: Indoasian/Legrand/Havells

S&F in replacement warm/ natural white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED lights fitting 1x 20W, 220V, AC warm / natural white decorative box type with driver, holder including LED tube light connecting up with three core lexible copper conductor cable of suitable size from ceiling rose complete complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC warm/ natural white decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: CG cat part no-LBHP-10-CDL or equivalent in Havells, Philips.

S&F in replacement mirror light upto 15 wat LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed. Make: Philips cat part No 581999 or equivalent in havells/crompton /Philips

S&F in replacement bollard LED light 10 watt inverted pyramid tripod type with soft 360 degree light out door type having resistant to corrosion withbetter optics for uniform distribution complete with suitable driveer & fixing nuts ,bolt and washer complete all as specified and directed. Make : Crompton Cat Part No LBLSN -10-CDL or equivalent in Havells ,philips

S&F in replacement LED building security light 120 watt luminare pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection of 120W, 240V 50 Hz AC supply complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED building security light 45 watt luminare pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection of 45W,240V 50 Hz AC supply complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED building security light luminare pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection of 90W,240V 50 Hz AC supply complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement LED building security light luminare pressure die cast aluminium housing with heat resistant toughened glass and IP 66 protection of 60 W,240V 50 Hz AC supply complete all as specified and directed. Make : Bajaj ,havells ,philips,crompton,orient ,polycab

S&F in replacement fan capacitor of capacity 2.5mfd complete all as specified and directed. Make : Epcos/ Anchor

S&F in replacement non metallic rigid PVC conduit medium grade upto 50 mm dia, ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

S&F in replacement non metallic rigid casing caping conduit medium grade upto 10 cm width , ISI Mark complete all as specified and directed. Make : Kalinga premium/ supreme/ finolex

S&F in replacement ceiling fans complete with REMOTE , blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling fan of color white or ( as per site requirment ) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt acomplete all as specified and directed. Make : Atomberg , Bajaj , Usha,Havells,Crompton ,Orient

S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample metal/pvc) complete all as specified and directed by Engg in charge. Make : Havells , Bajaj , Usha , Crompton , orient

S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 160 mm sweep (as per sample metal/pv ) complete all as specified and directed. Make : Havells , Bajaj , Usha , Crompton , orient

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc complete all as specified and directed by Engg in charge.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge.

S&F in replacement heating element of 2.0 KW (Rectangle/triangle /circular ) as required at site including rubber washers (ISI marked) etc complete all as specified and directed. Make : Venus or As per sample.

S&F in replacement storage tank made out of STEEL sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

S&F in replacement storage tank made out of STEEL sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed.

S&F in replacement chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

S&F in replacement PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark complete all as specified and directed by Engr-in Charge

S&F in replacement thermostat (ISI Marked) for 50 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

S&F in replacement thermostat (ISI Marked) for 25 Liters capacity Geyser complete all as specified and directed. Make : Daspass/Theeta/TTE

S&F in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed.

M&L in replacement for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected togalvanised iron (wire 4mm) as earthinglead lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 5 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc (NOTE:-GI earth streep 7.5m will be measured and paid separately) complete all as specified and directed.

S&F in replacement metal clad AC plug,20A , 230V AC complete all as specified and directed.

S&F in replacement Metal clad AC socket,20A , 230V AC complete all as specified and directed.

S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 A switch and one 5 A socket complete all as specified and directed. Note : no of switches and socket required are included in the quoted rate

S&F in replacement PVC gang box with cover four module suitable for fitting one15A switch and one socket complete all as specified and directed. Note : no of switches and socket required are included in the quoted rate

S&F in replacement PVC gang box with cover 6 module suitable for fitting switch and socket of 5 amp complete all as specified and directed. Note : no of switches and socket required are included in the quoted rate

S&F in replacement METALIC EXHAUST fans AC single phase 230/240 V of size 400 mm sweep (as per sample metal/pvc) complete all as specified and directed. Make : Havells , Bajaj , Usha , Crompton , Orient

S&F in replacement METALIC EXHAUST fans AC single phase 230/240 V of size 300 mm sweep (as per sample metal/pvc ) complete all as specified and directed. Make : Havells , Bajaj , Usha , Crompton , Orient

S&F in replacement METALIC EXHAUST fans AC single phase 230/240 V of size 250 mm sweep (as per sample metal/pvc) complete all as specified and directed. Make : Havells , Bajaj , Usha , Crompton , Orient

Repair / maintenance of complete solar heater plant of Cap 100/200 LPD installed at any height but not exceeding 15 mtr for carry out repair/removal of minor leakage cleaning of flate plate collection toughned glass cleaning of cold tank water storage tank & make up water tank including dismantling inlet & outlet pipe connection and re-fixing the same after cleaning for proper functioning of the system at required temp complete all as specified and directed by Engineer-in-charge

S&F in replacement Solar water heating element push type 3000 watt with and including thermostate of suitable shape round or triangular and size, any specification, confirming to ISI with PVC rubber washer clamps complete all as specified and directed by Engr-in- Charge.

S&F in replacement of toughed glass of flate plate collector of size 1800mm x 1200mm x 4mm thick complete all as specified and directed. Make – Inter solar/tata solar

S&F in replacement of Collector Observoir for flate plate collector of suitable size complete all as specified and directed. Make – Inter Solar Tech/tata Solar

S&F in replacement flate plate collector for solar waterheater suitable for Cap 100/200 Ltrs LPD hot rectangular in size 1840mm long x 1240mm wide and 100mm thick plus minus 10% with copper tubes headers fabricated out of 12mm dia copper tube 1300mm long & risers fabricated out of 8/10mm dia fixed with black coated radiation media film/compound with silver coated background housed in aluminium rectangular housing (frame) with heat resistance top toughened glass 4mm thick to collect the sun rays to operate the process complete with and connection with dead end plate & rubber washer etc confirming to IS 92177, complete all as specified and directed. Make-Inter Solar Tech/tata Solar.

S&F in replacement hot water tank complete with inner shell fabricated out of copper plate & outer cover fabricated of aluminium sheet of size 1.2mm thick duly filled with glass wools isolation media alongwith inlet/outlet & overflow provn fabricated in cylindrical/rectangular shape with including fixing with nut-bolts & clamps Cap 200 Ltrs complete all as specified and directed.

S&F in replacement Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore complete all as specified and directed.

S&F in replacement Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore complete all as specified and directed.

S&F in replacement 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC sheathed in service connections one twin core cable flat or circular of size 10 sqmm complete all as specified and directed.

S&F in replacement for sub main wiring with PVC insulated unsheathed copper conductor multi stranded FRLSHtype 1100V grade 2 x 6 sqmm complete drawn in new PVC conduit in surface wall and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSHtype cable for continuous earth wire and duly connected to common earth dolly complete all as specified and directed. Make : Havell, Polycab,RR kabel,Gloster , finolex

S&F in replacement for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSHtype 1100V grade 2 x 10 sqmm complete drawn in new PVC fixed to wall conduit and its accessories along with 1x 10 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSHtype cable for continuous earth wire and duly connected to common earth dolly connected complete all as specified and directed. Make : Havell, Polycab,RR kabel,Gloster , finolex

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSHtype, 1100 volts grade 2 x 4 sqmm complete drawn along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLSHtype in pvc conduit for continuous earth wire and connected to common earth dolly complete all as specified and directed. Make : Havell, Polycab,RR kabel,Gloster , finolex

S&F in replacement Complete Solar panel set (including battery ,LED , charger controller , diodeds everything ) complete all as specified and directed. Make Bajaj-BSZSL 50 Or philips , Halonix

Material and labour for cleaning and painting to old steel surfaces of Desert cooler with two coats of synthetic enamel spray paint over one coat of red oxide on external surface & two coats of anti corrosive black paint inside the Body tank & side grills over a coat of Red Oxide primer including scraping/rubbing with wire brush on old surface of Desert cooler complete all as specified and directed by engineer-in-Charge

S&F in replacement in replacement Desert Cooler fan motor capacity 1/5 HP, 1400 RPM single phase with fan blade and stand complete all as specified and directed.

S&F in replacement fan blade for fan motor of desert cooler complete all as specified and directed.

S&F in replacement capacitor 4 MFD for fan motors of desert coolers complete all as specified and directed.

S&F in replacement in replacement PVC insulated and PVC sheathed cable copper conductor 3 core 2.5 sqmm (superior quality) complete all as specified and directed.

S&F in replacement in replacement water lift pump plastic body of 220-240 Volts AC Supply single phase complete all as specified and directed by Engineer- in-Charge .

S&F in replacement grass pad for desert cooler ,sizea as per sample complete all as specified and directed.

S&F in repairs desert cooler body of size 60x55x65 cm made out of GI sheet & water storage tank of soze 65x55x20 cm deep made out of GI sheet including front grills & three side shutters duly fitted with wood pads 03 nos & duly spray painted with two coats of synthetic enamel paint over a coat of red oxide primer (inside & outside) complete all as specified and directed by Engr-in-charge.

Labour for checking and attending complants of desert cooler,Deepfreezer etc of any capacity, rectification minor defects and make the equipment functional complete all as specified and directed. Note: any parts required for replacement shall be measured and paid separately under respective items

M&L for taking down condensing coil from Deep freezers of any capacity and replacement by new Condensor coil as per existing capacity upto 800 Ltrs including brazing and dehydration by creating vaccuum so that no oil/sludge remains in the cooling coil/system complete all as specified and directed by Engr-in-Charge.

Servicing of deep freezer any capacity complete dismantling all parts and refixing after cleaning and replacement of defective parts, dismantling the cover of condensing coil carefuly and carryout servicing, cleaning the external surface (both side) and fan of the unit out side of equipment like base plate runner fan blade throughly with the help of descaling chemical, brush, water and dry properly including filling up the gas requirement using air blower for cleaning air dust deposited on the equipment and re-fixing the same after repair complete all as specified and directed. Note : gas (refrigerant ) charging and leakage testing -leakage repair includedin the quoted rate

M&L for taking down existing unsv compressor and fixing in replacemnt new sealed compressor suitable for upto 800ltr capacity deep freezer refixing including brazing work etc, pressure testing & establishing vacuum for dehydration complete all as specified and directed by Engr-in-Charge. Make: Kirloskar/Tecumsheh/Copeland/Danfoss/existing make deepfreezer complete all as specified.

S&F in replacement sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement sheet metal enclosures for DBs when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed.

S&F in replacement MCB TPN 40 to 63 Amps, 415 V, 10 kA rupture capacity, complete all as specified and directed.

S&F in replacement of MCB SPN 40 to 63 Amp 240 volt 10 kA rupture capacity, complete all as specified and directed.

S&F in replacement of MCB SPN / DP 6 to 32 Amp 240 volt 10 kA rupture capacity, complete all as specified and directed.

S&F in replacement MCB SP 6 Amp to 32 Amp 240 volts 10 kA rupture capacity, complete all as specified and directed.

S&F in replacement MCCB, 4 pole, 415 volt of capacity 100A breaking capacity not less than 25KA and including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and directed.

S&F in replacement MCCB, 4 pole, 415 volt of capacity 125A breaking capacity not less than 25KA including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc complete all as specified and directed.

S&F in replacement MCCB, 4 pole, 415 volt of capacity 80 A breaking capacity not less than 25KA including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc complete all as specified and directed.

M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc complete all as specified and directed.

S&F XLPE LT cable 25 sqmm 3.5 core, 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/fixed to wall/pole/laid in floor including taking out old unserviceable existing cables any sizes and necessary connections and suitable size of thimbling complete all as specified and directed by Engineer-in-Charge.

All as per item No 100.00 above but for size 35 sqmm 3.5 core complete all as specified and directed.

All as per item No 100.00 above but for size 50 sqmm 3.5 core complete all as specified and directed.

S&F in replacement factory made epoxy powder coated distribution board TP&N 4 ways (VTPN MCCB DB) with metal door suitable for one FP-MCCB 100 Amps as incomer and 12 SP MCBs or 4 TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed. Note : Rate of MCCB included in the quoted rate

S&F in replacement factory made epoxy powder coated distribution board TP&N 8 ways (VTPN MCCB DB) with metal door suitable for one FP-MCCB 125 Amps as incomer and 24 SP MCBs or 8 TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed. Note : Rate of MCCB included in the quoted rate

S&F in replacement factory made epoxy powder coated distribution board TP&N 12ways (VTPN MCCB DB) with metal door suitable for one FP-MCCB 160 Amps as incomer and 36 SP MCBs or 12 TP MCBs (or any combination of SP/TP MCBs) outgoings complete all as specified and directed. Note : Rate of MCCB included in the quoted rate

S&F in replacement double door bus bar chamber to connect XLPE cable euipped with copper bus bars of rationg 200 amp , made of MS sheet complete all as specified and directed.

S&F in replacement aluminium lugs complete all as specified, suitable for LT cable of sizes upto 50 Sqmm complete all as specified and directed.

M&L for painting of LT panels with two coat primer and two coat enamel paint , marking of danger sign on front cover of panel with RED colour marker complete all as specified and directed. Note: (a) Srl Item No 02.00 to 19.00, 22.00 to 35.00, 39.00 to 41.00, 45.00 to 48.00, 54.00, 57.00 to 62.00, 65.00 to 75.00, 77.00, 78.00, 82.00 to 84.00, 86.00, 88.00 to 102.00 & 104.00 to 109.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody. (b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge.

J B ELECTRICALS (BID ID -3385800)

SANJEEV ENTERPRISES (BID ID -3385886)

B Kumar and Co (BID ID -3386169)

M/S Sunil Steel Works (BID ID -3386197)

SNOWY ENGINEERING INC (BID ID -3385948)