CERTAIN REPAIRS TO WOODEN ALUMINIUM JOINERY CUPBOARD ROLLING SHUTTER ETC TO MD OTM ACCN OF ASC SOUTH 2 ATC UNDER GE CENTRAL BANGALORE

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc and removal of debris to a distance not exceeding 50 mts and depositing where directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MOD land complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site for credit & finally remaoval from site where directed.

All as per item 5 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each

Taking down shutter of any description area not exc 1.00 sqm Sqm each and stacking at site where directed.

Taking down shutter of any description exc 1 Sqm but not exc 2 Sqm each and stacking at site where directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L for injecting emulsion for soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified & as directed.

M&L for injecting emulsion for post constr anti-termite treatment to the soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.with cement mortar (1:2) to match the existing surface complete all as specified & as directed

M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

M & L for plain fillets of 2 nd class hard wood exc 13 but n.exc 25 Sqcm in section square, rectangular or triangular in section, cleanswan secured with nails complete all as directed.

S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm including filling the hollow section of frame with PCC 1:2:4 type Bo using 12.5 mm graded aggregate to thickness, complete as specified & as directed.

S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, mild steel sheet of 1.25 mm thickness, including filling the hollow section of frame with PCC 1:2:4 type Bo using 12.5 mm graded aggregate to thickness, complete as specified & as directed.(Note for item No 28 & 29 : : Quoted rate is deemed to inclusive of PCC filling in hollow section of steel frame).

S&F Second class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames , wrought, framed, rebated on the solid, rounded or chamfered , put together with glue, pinned at joints and fixed in position complete all as directed.

S &F factory made 35 mm thick plain framed, paneled shutter (Two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood rail and styles, fixed to chowkat, complete all as specified & directed.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

S&F 30 mm thick Flush shutters, solid core construction, with block coard core & plywood face panels commercial type on both side conforming to IS 2202 (Part- I) -1999, including internal liping beading all round fixed as in Door Shutter,Cup board shutter & Kitchen rack all as specified.

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed..

M&L for 18/19mm thick medium density fibre board, exterior grade, decorative type with decorative face veneer on one face & other side balancing white lamination , fixed with screws to timber frame work as in wall wardrobes , shelves and the like as ordered in repairs including 6mm thick Teak wood beading / edging / lipping fixed with nails to particle board complete all as specified & as directed.

M&L for 18-20mm thick WPC (Wood polymer composite) board with one side face decorative lamination & other side balancing white lamination , fixed in repairs to builtin cup boards / ward robe / partitions ,shutters , cabinets etc with screws to timber frame work as ordered complete all as specified & as directed.

M &L for 6mm thick external teak wood lipping fixed to 18/19 mm thick block board or veneered particle board fixed with nails complete all as directed.

S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F Powder coated aluminium sliding window (three way) frame & shutter with glazed shutter and with miremesh shutter /skeleton section with & including the following :- (i) Aluminium frame section 116x36.50x1.80mm. (ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick. (iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified. (iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape. (v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc. (vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for without glazed shutter etc. (vii) Aluminium disc /bow hanle and locking system complete

S&F anodized aluminium grill (anodised transperent or dyed to required shade according to IS: 1868 with minium anodic coating of grade AC 15) of approved design / pattern , with approved standard section & fixed to existing frame with CP brass stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing & operation of handles & fixing approved anodised aluminium standard section around the opening complete as directed and all as specified.

S & F150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 75 mm size butt hinges, medium weight coldrolled mild steel and fixed .

S&F 100 mm size butt hinges, medium weight coldrolled mild steel and fixed .

S&F 100 mm size extruded aluminium alloy handle (ISI Marked) cast type anodised and fixed.

S&F in repair 150 mm size extruded aluminium alloy handle (ISI Marked) cast type anodised and fixed.

S & F 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Supply and fixing brass mortice lock, vertical type, size 65mm, 2 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Supply and fixing magnet catcher / ball catches with 8 mm dia steel ball and brass body and striking plate including letting in and fixed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought , cross sectional area exceeding 3 Sqcm but n.exc 6 Sq cm fixed with nails complete all as directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including supply & fix second class hard wooden fillet, wrought, cross sectional area exceeding 3 Sqcm but n.exc 6 Sqcm fixed with nails complete all as directed.

S&F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Taking down damaged / rusted / unservicalbe MS gate fixed in any description & S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets etc including one shop coat of primer all around steel surface complete all as directed.

M&L for overhauling steel rolling shutter of area not exceeding 8 Sqm each (without taking down from position but by opening wood cover) , applying sufficient grease for trouble free operation , rexing the hood cover in position & making functional complete with necessary spares / parts as ordered complete all as directed.

All same as per item No 41 here-in-above but area of shutter exceeding 8 Sqm but not exceeding 12 Sqm each -do- (Note for item No 41 & 42 :(i) Replacement of parts to make the rolling shutter shall be measured & paid under respective items as supply only as quoted rate is deemed to be inclusive of fixing.(ii) In case any s

Supply only lever locks mild steel with 4 leversas per existing one & make for rolling shutter.

Supply only Ball bearing as per existing one suitable rolling shutter.

Supply only 25 mm dia mild steel connecting rod fitted to gear wheel & bevel gear as per existing one suitable rolling shutter.

S&F in repairs lath section made from colled rolled steel strips 1.2 mm thick with inter-locking curls at both edges & a deep corrugation at the centre with bridge depth of not less than 12 mm & each lath section shall be continious single piece with out any sort of welding complete all as specified and directed

S&F in repairs suspension shaft made out of mild steel pipe conforming to IS : 1161:1968 medium class 40 mm dia complete all directed

M & L for 75 mm thick plain cement conctere 1: 3 : 6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection finished the surface fair and even complete all as directed.

M&L glazed ceramic coloured tiles of size 350x250x7 mm / 450x300x7 mm thick, on verticals surfaces, set and jointed inneat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note : i) Quoted rate is deemed to be inclusive of cement screed. ii) Colour of tiles shall be got appproved before incorporation in the work)

M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surface finished the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls & distempering the surface with two coats 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete,as per manufacturer's specification.

S&F sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F in repairs sheet glass 4mm thick glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F 4mm thick figured glass , pin head type ordinary quality & glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane / louvers complete all as directed.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.