(CM Monit A plus) Construction of a community hall in Zone No. 03, Ward No. 25

ALL KINDS OF SOIL

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

"WALLS (ANY THICKNESS) INCLUDING ATTACHED PILASTERS, BUTTERESSES, PLINTH AND STRING COURSES ETC"

BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN

MOORUM/HARD COPRA

1:4 (1 CEMENT: 4 SAND)

1:3 (1 CEMENT: 3 SAND)

APPLYING ONE COAT OF CEMENT PRIMER OF APPROVED BRAND AND MANUFACTURE ON WALL SURFACE : CEMENT PRIMER.

NEW WORK (TWO OR MORE COAT APPLIED @ 1.67 LTR/10 SQM OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPL

"IN GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATES AND SIMILAR WORKS."

LIGHT POINT/FAN POINTS. SHORT POINT

LIGHT POINT/FAN POINTS. MEDIUM POINT

LIGHT POINT/FAN POINTS. LONG POINT

"POINT WIRING INCLUDING METALLIC SWITCH BOX, SHEET, SWITCHE, SOCKET FOR 3 PIN 6 AMP. SOCKET OUTLET POINT WITH 1.5 SQ. MM

CEILING FAN (ENERGY SAVER 50 W)-1200 MM SWEEP

CIRCUIT WIRING 2X2.5 SQ.MM.

SUPPLY AND FIXING A LED TUBE ROD COMPRING OF LED

"PROVIDING AND LAYING VITRIFIED FLOOR TILES (WITHOUT SOLUBLE SALT) OR PRINTED (WITH SOLUBLE SALT) NANO POLISHED (GLOSSY

KOTA STONE 25MM THICK FLOORING OVER 20 MM (AVERAGE) THICK BASE LAID OVER AND JOINTED WITH GREY CEMENT SLURRY MIXED WITH

"PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI

"PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI