SPECIAL REPAIR TO SICK LINE 1 AND 2 AT 45 MVH AT NDA KHADAKWASLA

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling old unserviceable stable flooring all as directed.

S & f stable comfort /flooring 50mm (2")thick of characteristics of natural pasture on the wall to wall, water proofing system . The flooring should have system of ergonomic, efficient and economical, stable comfort system with cellular bag, thickness of mattress is @ 2" (50mm) and mattress is coveres with a very durable and moisture proof top cover. The thickness of top of cover is 1/4" ( 0.25") and is coated with Latex rubber which makes it durable & water proof & the durable system provides ideal comfort to the horses & easy to clean out & maintain all as specified and directed by manufacturers.

M&L in repairs for Rubber / Leather sheet 12mm thick with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive.

Demolition of reinforced Cement Concrete of any description and in any position not otherwise specifically provided for including cleaning off the premises.

Excavating over areas in hard / dense soil, n exc 1.5 m deep and getting out.

Demolition of cement concrete in ground floor and pavings n. exe 15cm thick (below or above ground level) including cleaning off the premises.

M&L for Cement concrete in foundations, filling and mass-concrete Type D2 1:4:8 (40 mm graded aggregate).

M&L for RCC 1:2:4 Type B1 (Nominal mix) (20 mm graded aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete.

M&L for RCC 1:2:4 Type B1 (Nominal mix) (20 mm graded aggregate) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses.

S&F Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

S&F Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base ,laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing complete including & over 15mm thick screed bed in CM 1:4.

M &L Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M &L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F mild steel rings & hooks in floors for tying horses complete all as specified and as directed. Note:- Rings & hooks are made of 16mm dia steel bar fixed with steel rod 30cm embedded in the floor all as directed.

S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever castiron brackets, connecting union etc. overall size 450mm x 450mm with bowl 160mm deep all as specified and directed.

M&L for Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in wall surfaces and 3 mm thick setting coat trowelled and even and smooth finished all as directed.

Taking down cement plaster of any description.

M & l for rendering 15 mm thick in cement mortar (1:3) to concrete surfac es to be finished even and smooth using extra cement Setting coat 3mm thick,in 1:2 trowelled to even and smooth finish in all as specified and directed.

Supply only integral water proofing compound.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store.

S&F galvanised mild steel medium grade tubes 15mm dia bore with all fittings and fixed to wall , floor etc. complete all as specified and directed.

Ditto all as per above item No. 23 above but 20mm dia pipes.including GI plugs all as directed.

S&F in repairs Stop valves 15mm dia, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions including dismantling of old one complete all as specified and directed.

Ditto all as per above item 25 but bore of pipe 20mm bore.

Removing excavated soil n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M & L for providing plain cement concrete 1:3:6 type C2 using 40mm grade aggregate as in foundation filling and mass concrete/plinth cources all as directed.

M & l for preparation of newly plastered of concrete surfaces and applying two coat of synthetic enamel paint over a coat of alkali resiatant primer all as specified and directed.

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in surfaces channels & drains.

Dismantling wooden frame jafri in one way wall rellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately).

Taking down chowkhats or frame exc 1.5 sqm but not exc 4.0 sqm each with shutters (without taking off shutters from the frames).

S& F Framed work Fe 410-W (Gde E-250) quality A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

M & l for preparation of new steel surface over 10 cm width or girth of any description and applying two coat of synthetic enamel paint over a coat of primer surface all as specified and directed.

S& F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as speicifed and directed.

M & L for powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Powder Coating t (minimum thickness of powder coating 50 micron).

M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

M & l for Anodised aluminium (powder coated) door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M & l for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

M & l for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixedin aluminum frame work all as directed.

Demolition of PCC block masonry built in cement mortar and cleaning off the premises.

M&L Precast cement concrete block masonry with solid blocks using Type C1 1:3:6 exc 10 cm in width & setting in mortar CM 1:6 complete.

M&L Precast cement concrete block masonry with solid blocks using old blocks exc 10 cm in width & setting in mortar CM 1:6 complete.

M&L Precast cement concrete block masonry with solid blocks using Type C1 1:3:6 not exc 10 cm in width & setting in mortar CM 1:4 complete.

M&L 15mm thick rendering in CM 1:6 on block/stone masonry surfaces finished even & smooth wthout using extra cement.

M & l for preparation of newly plastered wall surfaces and applying three coat of white wash all as dpecified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, wooden etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work size of grid 605x605mm for false ceiling all as specified and directed.

S & F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium framework with screw as work in ceiling flat or sloping.including three mm thick white wash all as directed.

S & f in repairs Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions all as specified and directed.

M & L 35 mm thick Factory made II nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) supplied and fitted to chowkats.

M&L 100mm butt hinges cold rolled mild steel medium weight and fixed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections all as specified and directed.

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed.

S&F 150mm Aluminium handles, cast type, anodised.

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings all as specified and directed.

M & l for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls fixed with L or J type hooks all as specified and directed.

M & l for two piece 6.0mm thick Asbestos cement ridge serrated for corrugated or semi corrugated two piece adjustable plainwing ridge fixed with L type or J type hooks all as directed.

M & l for flat iron for wind tie including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

M&L for joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) to wall surface all as directed.

M&L for joint free Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6

S & F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.

M&L Machine cut cuddapa stone slab 35 to 40mm thick over cement screed base ,laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete.

M&L for 20mm thick Granite (of any type) tiles machine cut in cooking platform skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type incl 15 mm thick screed bed or bedding layer in CM (1:6) complete all as directed.

S&F fancy type Bib taps 15mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F 2nd class hard wood (sal wood) Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and incl fixed hold fasts (split at one end).

Taking down shutter of any description n exc 2.0 sqm each.

M & L 35 mm thick Factory made II nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) supplied and fitted to chowkats.

S&F 35mm thick Factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

M&L for providing & laying 100 mm thick Cement Concrete with Gde M-20 tremix concrete (design mix) with RMC and tremix machine and plate vibrator by using 20mm graded coarse aggregates as in floor surface/hardstanding/roads/slabs over drain; finished surface of concrete surface with smooth finish as required without using extra cement etc all as specified and directed including metalic hardner all as specified and directed.

M&L Vitreous China wash basin, white, flat back, size 550x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as directed.

S&F 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed .

S & F PVC connections 15mm size with PTMT nuts of length 450mm.

Excavation in trenches n. exe 1.5m wide & n. exe 1.5m depth for foundation etc n.exe 10sqm on plan and getting out in Hard/Dense soil.

M & L for providing bed to drain pipes 100mm dia in cement concrete (1:3:6) type C2 using 40mm graded stone aggregate including packing under & haunching against the sides of pipes after they are laid & tested.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor.

M & L for providing reinforced cement concrete pipes 100mm dia class NP 2 with collars laid and jointed with cement jointed all as directed.

M & L for providing precast RCC 1:2:4 type B1 (using 20mm grade stone aggregate as in cover slabs for manholes set in CM (1:6) all as ( Note : Reinforcement shall be measured & paid separately).

M&L for Preparing new plastered surfaces of walls applying two coats of distemper oil bound including 3mm thick wall care putty on walls all as specified and directed.

Complete removal of old treated surface of wall and applying two coats of distemper oil bound including 3mm thick wall care putty on walls all as specified and directed.

M & L Preparing new surfaces plastered of wall & applying two coat of cement base paint over a coat of alkaly resistant primer all as specified and directed.

M & L Preparing old surfaces of wall & applying two coat of cement base paint over all as specified and directed.

Taking down existing old unserviceable steel collapsible shutter all as directed.

M&L for glossy finish machine pressed precast conctete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 30mm thick sand chusioning.

M & L for providing plain cement concrete 1:2:4 type B1 using 20mm grade agg. as in coping including weathering slightly, rounded or chamfered angles and throating and necessary use and waste of form work all as directed.

M & l for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in kerb stone all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly, One light/Fan point controlled by one way switch 6 Amps 240 volts complete all as specified and directed

All as per item No 90 but One 3 pin socket outlet, 5/6 Amps, independent

All as per item No 90 but One 3 pin socket outlet, 5/6 Amps on the same board with other switches

All as per item No 90 but One 3 pin socket outlet , 15/16 amps on independent board with cable 4 Sqmm and4 sqmm as earth wire

S & F switch piano flush type 5 Amps SP one way all as specified.

S&F Socket outlet, 3 pin 5 Amps flush type

M&L Switch socket Combination 16A, 3 pin, flush type

M&L Switch socket combination 2 in 1, 5A flush type

M&L in electronic step type ceiling fan regulator Conform IS 4615-1968 120W, flush type.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

S&F LED tube light with diffused optics ultra bright LED tube light 18/20watt with high efficiency,integrated aluminum heat sink suited for installation in existing T8 tube light with G13 lamp holders all as specified.

S&F in replacement 1x18/20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified .

Taking down the ceiling fan carefully and cleaning/Servicing the fan if any repairs/replacing of parts required complete including painting the fan with enamel spray paint white coloured and fixing back the fan with fixing accessoires required at site and replacing existing wornout fan hooks.

Taking down the Exhuast fans carefully and cleaning/Servicing the fan if any repairs/replacing of parts required complete and fixing back the fan with fixing accessoires required at site.

Disconnecting and taking down existing userviceable geyser of 100 ltrs capacity, taking it to civil workshop for repairing.Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enamel paint(existing colors) and re- fixing to original place all as directed.

S&F in replacement LED security light fiitting 30W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed.

M&L in repalcement recess mounted 2' x 2' LED Panel lights 36 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Make:Havells Cat Part: VENUSNEOHE2X2PLR18-42WLED857MOD equivalent in Luker/Philips/Wipro Note: The quoted price shall include the cost of Light and its driver.

Supply and fix in replacement sheet metal enclosures single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as directed.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed (Two runs of 04Sqmm cable with 01run of 04Sqmm earth wire along with casing caping shall be measured as one RM)

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as specified.

S&F in replacement MCB DB 08 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site

S&F in replacement MCB DB 04 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site

S&F MCB SP 6 to 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

Supply and fix in replacement of C Curve MCB DP 6-40 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed.

M&L for laying XLPE underground cable 10 sqmm 4 core armoured sheathed with PVC cable stranded aluminium conductor 1100 volts grade

Excavation in trenches, n.exc 1.5m wide and n. exc 1.5 m depth and getting out in for foundation of pole, stay, laying of cable and pipe etc Soft/disintegrated rocks

M&L for laying of reinforced concrete pipe, dia of 100 mm 2 nos half round for bottom and top and before laying excaved area shall be levelling all as specified and directed. Note: One half round Top and One half round bottom together will be considered as one running meter.Make as per sample approved

Material and labour for cutting of existing road/ hard standing by providing suitable T&P to make suitable size trench for laying 50 mm dia pipe in road crossing etc. including the cost of making good the disturbed surface and matching with existing (Chequered tiles/Road/PCC) complete all as specified and directed.

Supply & fix GI tubing light grade 50 mm dia ISI marked with all fittings laid in trenches and fixed pole by flat iron clamps, nut,bolt,washers suitable size all as specified and directed at size.

R & Y CONSTRUCTION COMPANY

OM GANESH CONSTRUCTION

Sarkar Enterprises

Mehta and Co.