PROVN OF ONE ROOM AT BLDG NO. P-189 AT JAK RRC, SPL REPAIR TO EXISTING TOE WALL AT BLDG NO. P-22 AT GRC, SPL REPAIR TO P-39/1 AT EGYPT ENCLAVE AND SPL REPAIR TO BOUNDARY WALL AT BLDG NO. P-205 OF AGE B/R-II UNDER GE (W) JABALPUR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed. 80.00+20.00

Excavation over areas not exceeding 1.50 m in depth and getting out in Soft / Loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Soft / Loose soil as in foundations, laying pipes, cables, etc. complete all as specified and as directed. 21.91+30+15+21.80+10.33+15

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. 13.90+38+10+13.30+8.10+14

M & L for dry river sand cushioning over and around the cable for cable protection in trenches, leveled and punned down complete all as specified and as directed. Note: The punned down thickness shall be measured for payment. 6.50+3.10+2.80

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. 8.01+30+5+8.5+2.96+1

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M & L for moorum/ red bajri filling under floors laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed.

M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along the internal floor and wall junction using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.

Along the external wall below concrete or masonry aron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed. 15.18+2.56+10.70+0.90

M & L for PCC 1:2:4, Type B-0, using 12.5 mm graded stone aggregate as in Roof kerbs, Coving etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for PCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in hold fast etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for Demolition of road/path /concrete in ground floors and pavings PCC 1:2:4 type B-1 n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed. 1+1

M&L for providing Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete.

M & L for RCC M 25 (design Mix) using 20mm graded aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. 78.30+45.18

M & L for RCC 1:2:4, Type B1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M & L for RCC M25 (design Mix) using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves and the like complete all as specified and as directed.

M & L for RCC M25 (design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. 24.68+5.66

M & L for RCC M25 (design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed. 20.38+8.10

Supply only integral water proofing compound complete.

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified. 6.62+40.02

Ditto all as per above item but except brick work.

M & L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

M & L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:4 complete all as specified and as directed.

M & L for brick work with fly ash modular bricks, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed. 95+27.60

M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in damp proof course horizontal or vertical surfaces, including necessary form work, complete all as specified and as dire

M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceed 10 cm girth complete all as specified and as directed. 5+10

Supply and lay bricks sub class 'B' laid dry abutting each other with gap between adjacent slab not exc 10mm over UG cabel as in cable protection all as directed.

M&L for Granite slab as in skirting, dado, jambs, cladding to columns, window cills, cooking platform and like,etc., 18-20mm thick, machine cut, machine polished, bedded over and including 10mm thick screed bed or bedding layer of CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and cutting of holes for gas pipe complete all as specified and as directed. Note : Shade and colour shall be as directed by Engineer-in-charge.

Use and waste of form work to sides of concrete foundation, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter; for rough finished surfaces complete all as specified and as directed. 11.52+120+100

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs complete all as specified and directed. 62.40+49.2

Use and waste of form work to sides of pillars, posts, struts, piers, columns of any shape/ cross section for fair finished surfaces of concrete complete all as specified and as directed. 20.16+108+75

Taking down chowkats or frames n exc1.5 sqm with shutter (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm with shutter (without taking off shutters from the frames).

S&F Factory Made Solid PVC & cupboard shutters with particle board core 18 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by GE.

S&F 200mm long aluminium anodised barrel tower bolt and fixed

S&F in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.

S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anofised and fixed type C-21.

S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed by Engr-in-charge.

S&F 150mm long aluminium anodised handle cast type and fixed

S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

S & F in repairs Aluminium Anodised Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges, complete all as specified and as directed.

S & F MS work confirming to Fe - 410 - 0 or Fe - 310 - 0 for post and struts in fencing including cutting tops to shape as directed, bending to shape, notching for wire, or as in flat iron fillets for securing wire mesh etc, necessary drilling holes for securing barbed wire etc including bolting or riveting etc as required complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0

S & F galvanised, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.

S & F Mild steel framed work conforming to Fe 290 (Gde-E-165) such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. 100+60+60

S & F Mild steel (1mm Thickness), plain, blacksheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed.

M&L reinforcement using TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 565+1000+500

S & F reinforcement using TMT steel bars of 6mm to 8mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 100+10

M&L reinforcement using TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 100+100

M & L for rolled mild steel framed work conforming to Fe 410-w (Grade E-250) as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, fastening and fixing complete all as specified and as directed.

S & F Aluminium anodised door, window,ventilator frame Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete, as spd .

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

M & L for 75mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Plinth protection etc surface finished even and fair complete all as specified and as directed. 56+20

M & L for 75 mm thick, PCC 1:4:8, Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed. 110+5

M & L for 40 mm thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Flooring, surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for glazed ceramic tiles, coloured, first quality, of size 350x250x7mm / 450x350x7mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, finished with flush pointing in white cement or coloured cement to match, and including over 10mm thick CM 1:4 on fair faces of brick work or concrete surfaces as backing for tiles, etc., complete all as specified and as directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick(Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, including 20mm thick screed bedding layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

M&L for Vitriefied ceramic tiles 10mm thick of light shade (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 20mm thick screed (1:6) bedding layer, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified.

All as per above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed.

M&L for 60mm thick, coloured, rubber moulded, M 35 grade, Machine pressed precast concrete interlocking paver block of any shape and size jointed and pointed with grey cement and no pigment, confirming to IS 15658-2006, complete all as specified and as directed.

M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed.

M & L for preparation of old or new concrete/ brick surfaces, priming the surface with bitumen primer @ 400 grams per Sq.m, applying a coat of Blown Bitumen of grade 85/25 or 90/15 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight 3.0 Kg per Sq.m with sandwiched polythene film consisting of 90 micron HMHDPE film centre core by torch application with 100 mm overlap by thermo fusion including coating the surface with compatible blow bitumen of 85/25 @ 1.2 Kg per Sq.m and finished with a coat of bituminous aluminum paint @ 100 grams per Sq.m on top for water proofing treatment complete all as specified. M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete a) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:3 complete all as specified and as directed.

(b) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces.

(c) Laying unrolled over the bitumen coated surface, 3 mm thick polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction.

(d) Applying two coats of bituminous base aluminium paint on old or new surfaces including preparation complete

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

M & L preparation of Old steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. 27.40+5

S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets clamps as in rain water down pipes complete all as specified and as directed.

S & F PVC iron Bends [any radius], diminishing pieces or tapers [larger bore measured] with oval type access doors of 110mm bore, for Cast Iron soil / waste / vent pipes complete all as specified and as directed.

S & F 75 mm bore PVC [SWR] Bends of any radius complete all as specified and as directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed. Make : Finolex/ Kisan/ Supreme/ Prince. 4+4

S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal. Make : Finolex/ Kisan/ Supreme/ Prince.

S & F PVC Iron Vent Cowls suitable for 75mm dia pipes complete all as specified and as directed.

S & F PVC Iron Vent Cowls suitable for 110mm dia pipes complete all as specified and as directed.

S & F in repairs 75mm dia out let, Cast Iron Floor Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, Type B-1 complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, surfaces finished fair and even complete all as specified and as directed. 300+696

M & L for rendering 10 mm thick in C:M 1:3 on Ceiling in patches and finishes and smooth complete all as specified and directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. 115+50

M&L rendering 15mm thick on brick or concrete surface consisting two layers, under layer of 10mm thick in CM (1;6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finish even and smooth.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surfaces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Taking down Cement Plaster any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed. 115+300+696

M & L for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed.

M&L for applying two coat of distemper Oil emulsion white or tinted on new putty surfaces of wall complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coat of distemper Oil emulsion white or tinted.

M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed. 70+50

Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-charge.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe all as specified and directed by Engr-in-charge.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as spd.

Dismantling water tanks and removing to store of capacity n exc 250 ltrs all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity all as spd.

S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 250 Ltr capacity all as spd.

S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

Pillar taps 15mm fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S&F 15 mm concealed type stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. 8+2

S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches/ floor, fixed to walls, fixed to walls including necessary brackets clamps; complete all as specified and as directed. 18+10

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete.

S & F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and as directed.

S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S & F in repairs white Vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and 'P' or 'S' trap including provision of lime concrete bedding complete all as specified and as directed.

S & F in repairs 10 Liters capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete.

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete article 34.22+66.70+1.50

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

Dismantling boarding, any description, fixed n any position with screw.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S & F punched tape concentrina coil placed and fixed in between double sawn neck angle iron posts complete all as specified and as directed.

Complete removal of existing treatment on walls including steel wire brushing and scraping etc and applying 3mm thick( Avg) Birla wall care putty in two layers on wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes as directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete.

S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower (Including Hand Shower and Flexible Hose & Bracket) complete with 115mm long bend pipe, connecting legs and wall flange complete.

S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete.

S&F cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete.

S&F in repair CP two way bib tap with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repair of stainless steel soap dish, of standard size and shape complete.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S & F in repairs Toilet Paper Holder, Chromium plated, Fancy type complete all as specified and directed.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

(a) Supply and fixing of oil pull out(sleek make) of SS304 grade anticorrosive material .

(b) Supply and fixing of plain basket(sleek make) of SS304 grade anticorrosive material .

(c) Supply and fixing of Thali basket(sleek make) of SS304 grade anticorrosive material .

(d) Supply and fixing of cup&saucer(sleek make) of SS304 grade anticorrosive material .

(e) Supply and fixing of cutlary tray(sleek make) of SS304 grade anticorrosive material .

(f) Supply and fixing of Binholder(sleek make) of SS304 grade anti corrosive material .

S&F stainless steel Auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment +_ 2.50mm & depth adjustment 4mm complete all as specified. Make : Godrej / Hettich.

S&F hitched channels Chanel and ( exc 300mm n exc 500 mm ) as complete all as specified and directed.

S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F Europa cupboard locks as complete all as specified and directed.

S & F factory made 100% Solid Wood plastic composite (WPC) Door frame 90mm x 45mm made from wood plastic composite (Single Extruded Process) material with density 780Kg/Cbm & manufactured by Rajshri Plastiwood, Pithampur (MP) an ISO 9001 - 2015 Certified Company, all as per specification drawings and as directed by the Engineer-in-Charge Door should be water proof, Termite Proof, Fire Retardant & having good screw holding capacity including making good to the disturbed surfaces complete Make : Rajshri

S & F Providing "RAJSHRI" brand SOLID PVC DOUBLE DOOR FRAME (CHOUKHAT) of size 120mm x 50mm with a wall thickness of 5mm (+0.25mm), made out of extruded 5mm (+0.25) mm thick PVC Sheet of density 600Kg/Cbm manufactured by an ISO 9001 - 2015 certified company and by joining 3 Nos. heat mouleded PVC Sections. The hinge section of size 35 x 35mm shall be made from plain colour PVC Sheet of 5mm (+0.25) thichness. The inside section will be covered with 5mm thich PVC sheet 'C' shape covering section of size 120mm x 50mm. At center top position 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cur at to corners & jointed with 4 Nos of 150mm long 'L' brackets of 19x19mm MS sq Tubeor fusion heat welding process. The two vertical doors frames are to be reinforced with 25x25mm MS sq Tube of 19 guge throughout the frame. The door frame shall be fixed to the wall using 8/100 mm fishcher screws. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. including making good to the disturbed surfaces complete as per manufacturer's specification & direction of Engineer-in-charge Make: Rajshri

S&F of 30mm thick "RAJSHRI" BRAND FACTORY MADE MOULDED DOOR SHUTTER- WOOD FREE consisting of frame made out of M.S. Tubes of 19guage thickness and size of 20mm X 40mm for stiles as well as top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick mutlichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/cynoacrylate adhesive with 5mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on oe side of the inside panel. 5mm plain/prelam PVC sheet to be pasted using solvent cement/cynoacrylate adhesive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (made by sticking 2 Nos. rigid foam PVC sheets of 5mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC link of matching colours of plain/prelam moulded PVC Sheet of door. 20mm thick (5mm x 4nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3nos. stainless steel butt hinges of size 100mm*25mm*2mm and 50mm long steel screws drilled suitable to pass through both the wall of the M.S. tube other hardware should be fixed with 25mm*8mm size steel screws etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacture's specification and drawing.

S&F of 30mm thick "RAJSHRI" BRAND FACTORY MADE WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. Tubes of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15MM for top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. 19mm x 19mm M.S. squqre tubes shell be covered with heat moulded plain sheet 'C' channel made from 5 mm (+0.25) thik PVC sheet of density 6 KG/Cbm Manufactured by an ISO-9001-2015 certified Company, of size 30 mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wiremesh fixing steel screws. 5mm (+0.25)thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of /gi/SS wiremesh of 24 gauge to be fitted inside area of stiles & rails. The wiremesh in top, bottom & rock rail is sealed with 15mm X15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wiremesh interior at the top, bottom & rock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.

S&F 24 mm thick PVC flush door shutter having one side lamination with 2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware's should be fixed with 25 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge

S&F anodised aluminum window and ventilator shutters, sliding type without sash bars, aluminium section weighing 0.55 Kg/ RM including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) including making good to the disturbed surfaces complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay complete

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F MS Peg set of six powder coated as approved by GE

S&F in repair Stainless steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour including end globe as approved complete including side mounting.

S&F Stainless steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete.

M&L for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed. 6+11+10

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

M & L solid wall DWCP socketed drain pipes class SN-8, conforming to IS 16098 (Part-2) with 150 mm bore dia in 6m length including laying and jointing complete all as specified and as directed

Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down carefully main switch and distribution board any make and size.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

Taking down carefully old unserviceable any type sub main wiring with wooden batten/ PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces completa all as specified and directed by Engineer in charge.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed/open PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point/ Bell point controlled by one switch. 30+3

(b) One fan point/ ex fan controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 165 here in befor but with 1100 volts grade copper standard conductor cable FRLSH of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge .

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge. Make: anchor/plaza/leader

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge Make: anchor/plaza/leader

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge.Make: anchor/plaza/leader

S & F in repair lamp holder PVC Polycarbonate type body, with back plate for batten fitting icluding 9 watt led lamp complete all as specified and as directed by Engineer in charge. Make: anchor/plaza/leader

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed.Make:City 1 of Havells or equivalent in bajaj/philips

S & F in repair Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed.Make : Philips Cat part BN 021 LED 22S 6500 PSU GR SI or equivalent.

S & F in repair of LED Decorative /mirror light fitting 9/10 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.Make- Havells LUMILINEPLUSSBS10WLED865SPCSS or equivalent in PHILIPS ,BAJAJ

S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suiyable size & length complete all as specified & directed. Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj

Supply and fixing single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 300mm sweep, metalic body complete with metalic louvers incliuding making hole of suitable size and makin goood the disturbed suface and shutters including electirc connection with pvc flexible twin core copper wire from ceiilng rose Exhaust fan, nut & bolt complete all as specified and directed. Make:Bajaj/havells

Supply and fixing Exhaust fan heavy duty plastic body size swep 250mm sweep, single phase AC 230 v, 50 Hz including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiilng rose to Exhaust fan, nut & bolt complete all as specified and directed. Make:Bajaj/havells

Supplying and fixing,testing the water heater storage type 25 litres, BEE Five star Rated capacity and after connecting electric and water connection and screwing nuts and bolts , anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as required and as directed at site.Make:Bajaj/Racold/Havells.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge Make: Legrand cat no :4086 83 or eq in SEIMENS /GE .

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.Make: Legrand cat no :5078 11 or eq in SEIMENS /GE

S&F in replacement of sheet steel enclouser distrubution boards, double door factory made vertical TPN 4 way 3 phases 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TPN 63 A- 04 Nos circuits comprising of 3 phases 4 wire of suitable rating all as specified and directed.

Supplying & fixing in repairs 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sqmm served with inner sheathed of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of make Plaza/ Polycab/ Finolex

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2.0 core 10 Sqmm complete all as specified and directed by Engineer in charge Make- Polycare,Havals

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2.0 core 16 Sqmm complete all as specified and directed by Engineer in charge Make- Polycare,Havals

Supply , laying and testsilng cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge Make- Polycare,Havals

S & F in repairs Integral Post Top Lanterns of capacity 20 Watt MH, brown painted LM6 alloy cylindrical spigot, decorative acrylic bowl supported by spun aluminium top cover with all accessories and 250 Watt MH lamp, complete all as specified and as directed by the Engineer - in - Charge of Bajaj catalogue No. BJODCI 250 MH or equivalent modal in Crompton Greaves or Phillips. .

Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V all as per required and directed make-Sudhir/ Baliga/Shyam

Supply and fixing in replacement MCB/ Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed by Engineer in charge Make- Legrand , L&T, ABB.

Supply and fixing LED light fitting 1x8 watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB Zone 1& 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube llight fixtures driver, holders, connector etc. Complete with all accessories prewired and includiing connecting up with three core flexible copper conductor cable with suitable sixr\e of 2x 16 watt. make Sudhir/ Baliga

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed by Engineer in chargeMake- Legrand , L&T , ABB.

Supply and fixing in replacement Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge Make- Legrand , L&T, ABB.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge Make:Legrand Cat no :5076 80 or Eq in SEIMENS/GE .

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) Reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. 1+2

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

Supply & fixing electronic energy meter tamper proof design digital technology of three phase 3 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp complete with all accessories complete with fixing accessories on finished wooden box all as specified & directed at site. Make: Saral of secure or equivalent.

M&L cutting of roads/trenchless technology method all as per required and directed by Engr-in-Charge.

S&F porceliene insulators 15 BMD type T with nut bolts/ screws for fixing of aluminium strips on roof including provn of PCC of size 10cmx10cmx10cm height etc to avoid leakage of roof complete as directed.

S & F in repairs Single Pointed Air Termination Aluminium Rod 12 mm dia and 300 mm long, fixed on over head reservoirs for Lighting Protection with necessary connections to earthing etc complete all as specified and as directed.

S & F in repairs Test Point Terminal Block made of Gun Metal or Phosphorus Bronze of size 75 X 75 X 25 mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw complete all as specified and as directed.

S & F Aluminium Strip of size 25 X 3.15 mm, fixed to walls / columns / beams etc with Porcelain Insulator at 1.00 m intervals for 16 to 18 m height reservoirs as in Lightening Protection complete all as specified and as directed.

Supply and fix Galvanised iron strip 32 x6mm buried in ground strips with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and as directed.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 3.15 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 25 mm X 4 mm GI Strip [Earth Lead] and GI Pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 5 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:3:6, Type C2] Pit with Cover, MS Funnel with 20 mm dia GI Watering pipe, wire mesh, earth work excavation etc complete all as specified and as directed.

Supply and errect vertically Galvanished, steel rod 16mm diameter and 2.5 metres length complete with fittings for raising height for air termination rods to site present requirement.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid dry flat complete all as specified and directed by Engr-in-charge. 646+630

M&L for Sub Main Wiring four single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and two run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Four Nos of 6.0 Sqmm Wire and two No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Sub Main Wiring two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 4.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

Supply and fixing in replament MCB single pole 240 volts 6 Amp to 32 Amps, B series complete all as specified and directed by Engineer in charge Make : Legrand Cat No DX3SP, 408587, 408590, 408592, 408593, 408594, 408595/ Siemens Cat No 5SL41067RC, 5SL41107RC, 5SL41207RC, 5SL41257RC, 5SL4132RC/GE

Supply and fix FLP DB 6 Way CMRI certified recommended for gas / vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing complete with all accessories I/C 32 amps SPN and outgoing MCB 16 amps 03 nos prewired with suitable rating of bus bar all as per required and directed by engineer-in-charge.

ANAMIKA CONSTRUCTION

MAA SHARDA CONSTRUCTION

chandra builders

mandeka constructions