HOLISTIC, RESTORATION AND MAINTENANCE OF CERTAIN GATES FORT, REPAIRS TO SHEDS, ROOF SHEET REPLACEMENT AND CONNECTED WORKS IN OD FORT UNDER GE (EAST) PRAYAGRAJ.

Amount

Dismantling of brick tiles any size laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roofs any thickness and in any position and leaping over roof terrace, removing the demolished materials to a distance exc 250 Mtr & n.exc 500 mtrand depositing where directed at a level n.exc 1.50 mtr above starting point, complete all as specified and as directed.

M&L for cleaning the old roof surface including taking down existing roof treatment of any type from roof slabs and cleaning of surfaces, by wire brushes, brooming, removing dust from roof and levelling coarse of Plain Cement concrete (PCC) 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof padding and finishing the surface fair & even and mixed with water proofing compound (WPC shall be measured and paid separately) as per manufacture's instructions finished even & fair complete all as specified and directed.

M&L for screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with water proofing compound ( WPC to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.(Make:Dr. Fixit,Pidilite).complete all as specified and directed.

Preparation of PCC/RCC roof surfaces and then providing 10 mm thick SBR polymer modified plaster in cement mortar 1:4 cement mixed with polymer in ratio of 1:10 (1 part of polymer and 10 parts of cement) applying priming coat of epoxy primer with resin and hardener with water dilution as per manufacturer instructions, applying two coats of solvent based polyurethane liquid membrane not less than 500 micron thick UV stable having SRI value greater that equal to 105 with consumption of 0.61 Kg/Sqm (each coat), complete all as specified and directed. Note:- (a) The work shall be carried out complete as per manufacture's specifications and application methodology. Execution shall be done with authorized trained/skilled applicator of manufacturer as per the technical guidelines laid by manufacturer. Company back guarantee of 10 years shall be given by contractor after completion of Water Proofing work before payment. b) Ponding test for 72 Hours shall be carried out by contractor to check any instances of Leakage/Seepage, The results of successfull Ponding Test shall be certified by Engineer-in-charge and User Rep before payment.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified and as directed.

S&F ceiling using 'E' board of size 605 mm x 605mm x 4mm thick, white prelaminated set embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick galvanised steel sheet and of size 24mmx32mmx300 mm board spaced at 1200 mm maximum centre to centre. Hangers of GI wire 4mm dia to be fixed by approved rawal plug level and fasteners and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 1200mm longer cross tee (with double stitching) to be interlocked between main runners at 600mm centre to centre from 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm doubles to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee.(with double stitching) to be interlocked between main runners at 600mm centre to centre from 1200x600mm modules cross tee longer than 600mm to be supported independently. Tee perimeter wall angle shall be 0.45mm thick GS sheet of size 19 mmx19 mm and 300mm long of white colour all as per manufacture's instructions compete all as specified & directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets in roof covering complete all as specified and directed.

S&F prepainted coloured galvaniume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stregnth of 550 mpa as in roof covering and gladding to wall fixed with self tapping screws complete all as specified and directed.

S&F prepainted coloured galvaniume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to roof wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F structural rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, ladders etc fixed with angle cleats or other connecting plates conforming to grade Fe-410W (Gde E-250) quality-B complete all as specified and directed.

S&F structural rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to gradeFe-410W (Gde E-250) quality-B complete all as specified and directed.

M&L for synthetic enamel painting two coats to new steel surfaces over a coat of red oxide primer including preparation of surfaces of any description over 10cm girth or width not other wise described complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat synthetic enamel paint complete all as specified and directed.

S&F in repair 110 mm dia PVC(SWR) plain bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, finished even and smooth witht using extra cement complete all as specified and directed.

S&F in repair Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, Kerbs, etc including necessary formwork etc complete all as specified and as directed.

M&L for Removing of vegitation growth cutting of shrubs plant or tree of girth any size incl roots from wall and roof of bldg,mouth of rain/waste water pipe for building height upto 25 mtr including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying chemical blue vitriol at the root of vegetation and making good the damaged portion with CM 1:3 or PCC 1:2:4 & two coats of cement base paint etc complete all as specified and directed.

Note for Item Ser 1.00 to 23.00 :- The items executed upto 25 mtr height from GL, necessary scaffolding, props, jacks, shuttering and ladder shall be provided by the contractor in his own arrangement and the same is included in unit rates quoted. Green cloth shall be provided all around the work site for any position/height with all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc) Without safety precaution this work will not be commenced as decided by Engineer-in- Charge/ by AGE(I). NO extra cost shall be paid for such precaution. Such precaution shall be deemed to be included in the quoted rate.

Demolition of Stone slabs and tiles of any description or thickness in floors,walls etc.laid bedded and pointed in any mortar complete all as specified and direced.

S&F for Dholpur stone cladding 16 to 18 mm thick gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment.including 15mm thick rendering as in backing coat in CM 1:4 complete all as specified and directed.

S&F 40 mm thick Dholpur sand stone slabs as in flooring, dressed close picked on exposed faces, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match including 20 mm thick screed bed cement mortar 1:6 complete all as specified and directed.

M&L for 25 mm thick cement concrete type type B-0, 1:2:4 (12.5mm graded stone aggregate) as in sub base complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Supply & fixing sand stone jali 40 mm thick through out in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone complete all as specified and directed.

M&L for sand stone pillar work moulded at top and both side make a groove for fixing of sand stone jali cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : Red sand stone complete all as specified and directed.

S&F in repair ACP panel as in wall panelling,cladding or ceiling 3 mm thick of required colour, fixed on mild steel framing or grid o specified spacing fixed on wall or coloumns by drilling hole with screw and joints of panels shall be sealed with silicon tape as per manufacture instruction complete all as specified and directed.

S&F for 3D LED Acrylic sign letters in twin or multi colour (as directed by engr-in-charge) (english capital letters) of size exceeding 300mm up to 450 mm in height not less than 40mm in thickness fixed to groves of the letter size cut in ACP Pannel of fixing the same with sitable LED strips of single or multi colour,drivers,connector and wires duly connected to each letter complete all as specified and directed. ACP sheet will be measure and paid seperately)

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for Brick work with fly ash (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6.complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured & paid seprately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly external plastered surfaces of wall and applying two coats of weather proof paint of APEX of Asian paints or its equivalent over a coat of white primer including applying 2mm to 3mm thick wall care putty all as specified and directed. Make : Apex of Asian/ Weather coat of Berger / Extra of Shalimar

M&L for preparation of old external plastered surfaces of wall and applying two coats of weather proof paint of APEX of Asian paints or its equivalent over a coat of white primer including applying 2mm to 3mm thick wall care putty all as specified and directed. Make : Apex of Asian/ Weather coat of Berger / Extra of Shalimar

Note for Item Ser 36.00 to 39.00 :- Wherever, the items are to be executed upto 25 mtr height from GL. Necessary scaffolding, props, jacks, shuttering and ladder shall be provided by the contractor in his own arrangement and the cost of the same is deemed to be included in unit rates quoted. Green cloth shall be provided all around the work site for any position/height with all safety precaution (i.e. Safety Jacket, Safety Shoes, Safety Masks, Safety Helmet, Safety harness, Safety Goggles etc). Without safety precaution this work will not be allowed to commence complete all as specified and as directed. NO extra cost shall be paid for such precaution. Cost of Such precautions shall be deemed to be included in the quoted rate.

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site complete all as specified and as directed.

M&L for point wiring in concealed PVC conduit complete including necessary chasing, cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd size (factory made) with top cover 3 mm thick of plastic laminated sheets of required colour painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match with existing surface complete all as specified and as directed for the following:-

One light/fan/exhaust fan point controlled by one switch

One light point contro- lled by two 2-way switches,

One 5 amp socket outlet point on same board

One 5 amp socket outlet point on an independent board

One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire complete all as specified and as directed.

S&F switch piano, single pole one way 5 Amps 240 Volt complete all as specified and as directed.

S&F switch piano 06 Amp 2 way 240 Volt complete all as specified and as directed.

S&F for switch piano fiush button single pole one way 15 amps 240 volt complete all as specified and as directed.

S&F for socket 5 amps 5 pin flush type , 230 volts complete all as specified and as directed.

S&F for socket 15 amps 6 pin flush type , 230 volts complete all as specified and as directed.

S&F ceiling rose three terminals / PVC / polycarbonate ,isolated body on PVC board complete all as specified and as directed.

S&F modular Switch Piano Flush button single pole one way 5 Amp complete all as specified and as directed.

S&F modular socket outlet flush type 3/5 pin 5/6 Amps 230V AC all as specified and directed.

S&F modular switch piano flush single pole one way 15/16 Amps all as specified and directed.

S&F modular socket outlet flush type 5/6 pin 15 Amps 230V AC all as specified and directed.

S&F modular ceiling fan step regulator 2 module complete all as specified and as directed.

S&F modular ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F modular Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F modular flush box 3 module complete all as specified and as directed.

S&F modular flush box 6 module complete all as specified and as directed.

S&F modular flush box 8 module complete all as specified and as directed.

S&F modular white cover plate 3 module complete all as specified and as directed.

S&F modular white cover plate 6 module complete all as specified and as directed.

S&F modular white cover plate 8 module complete all as specified and as directed.

S&F in repair for LED tube light fitting 1 x 20 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body, environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F in repair lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent holder fittings including lamp complete all as specified and directed

S&F in repair ceiling light with recessed mounted LED light luminaries of size 600 mm x 600 mm (cool day light /warm white) an independent isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage- 36 watt maximum, Colour Temp - 3000 to 6500 K, Lumen output- 4200-4400 Lm, THD < 10%, PF > 0.95, having short circuit and surge protection upto 4 KVA with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F in repair for wall mounting light fitting polycarbonate body, decorative type unbreakable including 9 Watt LED lamp complete all as specified and directed.

S&F in repair fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and as directed.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 A complete all as specified and as directed.

S&F in repair sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note:- MCBs will be measured separately.)

S&F in repair MCB single pole 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and as directed.

S&F in repair MCB SPN 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S&F in repair Sheet metal enclosure Vertical TPN DB 4 Way 415 V with 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands and With provision for one no of 4 Pole MCCB as incomer and MCB SP/TP as outgoing complete all as specified and directed.

Supply and fixing in repair MCCB TPN 100 Amp, 415 volts 16 KA Thermal Release Range complete all as specified and directed.

M&L for Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawing into conduit and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC riged conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and as directed. Note:- The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt. Quoted rates shall deemed to be included for taking down and transportation of the fans and the fans will be disposed off as per policy in vogue.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S&F in repair electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt. complete all as specified and as directed.

S&F in repair wall fan, AC single Phase. 230V of size 400 mm sweep with blades, The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt. complete all as specified and as directed.

S&F in LT UG PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size cross-sectional area 3 1/2 core x 95 sq mm , fixed on walls / ceilings / trusses of complete incl taking down the old unserviceable cables complete all as specified and as directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. fixing on wall/pole with GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and grouting on wall with necessary MS nuts, bolts and washers all as specified and directed.

M&L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of galvanised iron 25x4mm strip all as shown in Plate No. 03 and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1 and connected to earth test point, 40mm GI light grade protection pipe and 20mm GI medium grade water pipe including testing & taking down of old/ ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode)

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of suitable hole for exhaust fan and making good disturbed surfaces of walls, floor to match with existing specification The contractor shall deposit the existing fan to store yard of AGE E/M Fort cantt complete and all as specified

S&F in repair downlights with recessed mounted adjustable LED downlights made of extruded due cast aluminium housing and high power LED as a light source of system wattage - 12 Watt, Colour Temp - 6000 K, Minimum Lumen output- 800 Lm, cutout dia - 125mm, complete with including separate independent electronic LED driver and accessories pre-wired upto terminal block including making connection and testing complete all as specified and directed.

S&F in repair connect & test energy efficient LED flood light fittings 120 watts presure diecast aluminium housing and IP 66 all as specified & directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil including bottom surface to required level or slope for laying of cable etc. complete all as specified and directed.

Returning filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft/loose soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches and consolidated complete all as specified and directed.

Supply and laying dry well burnt locally available bricks sub class 'B' brics laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

Boring holes for Insertion of 40 mm dia GI pipe under PCC/ Road/ Taxi track/ hard standing not more than 12mm deep complete all as specified and directed. Note: - (i) Cost of equipments tools & plants, material required for boring shall be deemed to be included in the rates quoted above. (ii) GI Pipe shall be measured and paid separately.

S&F in repair for GI pipe 40 mm bore 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing including taking down existing pipe complete all as specified and directed.

Supply and laying and testing cable XLPE Insulated ,screened ,PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) 1100Volts grade with stranded aliminium conductor or size 10 sq mm 4 core and including rigid PVC conduit as per site requirement, flat or circular , in repair complete all as specified and as directed.

S&F in repair Post top light 35 W , Warm White, IP 66 light and to be fixed on cement conctrete in bed in foundations filling and mass contrete and making electrical connection with copper cable complete all as specified and as directed.

Supply and Installation in repair of 3 mtr cast aluminum heavy pole designer leg and broader designer base finished with polyurethane paint (with prior treatments). diameter of one leg is approx 76 mm. outer dia for spigot entry 60 mm. 03 nos. t shaped bolts with nuts & washers provided for concrete foundation and total length of the pole including base and legs (base with plate x 4 nos legs) is 3100 mm (10 feet 2 inches) complete all as specified and directed.

S&F in repair digital type 24 hrs timer switches suitable for operation of street light luminarie with 4 pole Power contacotr of 40 A capacity - 01 No suitable for 3 Phase, 4 wire system incl necessary MCB TPN 6-40 A capacity - 01 No as control the system, fixed in the Outdoor type LT junction box madeup of powder coated CRCA sheet steel enclosure 3 mm thick floor mounted of suitable size complete all as specified and as directed.

S&F in repair Robustly designed IP65/IK10 Bollard garden light 15 W, size 900mm Innovative desigh with uniformly lit diffuser at the upper portion acts a beacon of path guidence in a landscape environment light , inclusive LED bulb 15 W ,warm light to be fixed on cement conctrete in bed in foundations filling and mass contrete and making electrical connection with copper cable all as specified .

S&F in repair of wall mounted Distribution Board factory made of size 600mm x 450mm x 150mm made of MS sheet 2.0 mm thick CRCA sheet with powder coated paint ,dust and vermin proof with front openable door and locking arrangement consisting of following accessories: (a) MCCB 100A, 4 pole 25kA fixed magnetic and thermal release - 01 No (incoming) (b) 3 phase and neutral bus bar copper LT 440V, 200 A (outgoing) (c) Phase indication lamp LED type R,Y,B

M/S A P CONSTRUCTION (BID ID -3120605)

M/s NSA Engineering Corporation (BID ID -3129134)

R.K.ASSOCIATES (BID ID -3128939)