02/E.U.D.C.-Talkatora/2025-26

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

T/F 11/0.4KV, 250 KVA

T/F 11/0.4KV, 400/630 KVA

Cable AL 3X120 SQMM XLPE 11 kV

LT XLPE Cable AL 3.5X240/400 sq.mm

LT XLPE Cable AL 1X400, 1X630 Sq.mm

Cable LT ABC (3X120+1X95+1X16) sq.mm

PCC Pole 9.0 Mtr.

STP 11M-IS 410 SP-55

Disc Fitting 70 KN (B&S TYPE)

Dropper Channel

T Off Channel 125X65mm 3200mm (10.70kg/M)

Top Channel 125X65mm 3200mm (10.70kg/M)

Stay Set Complete

11 kV Cable Jointing Kit (3X120 SQMM) O/D

Polymeric 11 KV Pin, PIn Insulator

11 KV TPMO with Fixing Clamps

LT incoming panel with metering equipment and fixing arrangements (L.S.)

GI PIPE 6" DIA

11 KV Fuse Set/DO Fuse Unit.

Fabrication, Erection of Double Pole Structure on 11 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 Nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Erection of Single Pole structure on 09 mtr. PCC with fixing of necessary clamps and other accessories required for stringing along with plinthing, grouting & earthing of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of the poles.

Erection of Single Pole structure on11 mtr. STP with fixing of necessary clamps and other accessories required for stringing along with plinthing, grouting & earthing of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Disconnection of existing 100/250/400 KVA Transformer from system shifted upto safe place to the nearest 33/11 K.V. Sub-Station of Division or required place.

Safe carriage of dismantled T/F from site of work to JE dump store & J.E. dump store to ESC Daliganj, Lucknow including loading/unloading and proper stacking

Placing of 250 K.V.A. healthy Transformer from out side of yard to plinth with the help of crain and T & P.

Placing of 400/630 K.V.A. healthy Transformer from out side of yard to plinth with the help of crain and T & P.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Laying of 11 K.V. XLPE Cable 3X120 mm2 in single circuit underground as per digging of earth pit of Size 0.60x0.90 with provision of Sand filling and Cover with side brick and Top with Stone pad. (11 K.V. XLPE Cable will be provided by deptt. only)

Lay down the LT XLPE Cable Al. of size 3.5X240, 1X240 Sq.mm. for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center. (11 K.V. L.T. XLPE Cable will be provided by deptt. only)

Lay down the LT XLPE Cable Al. of size 3.5X400, 1X400 Sq.mm. for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

Earthing of 11/0.4 K.V Distribution Transformer body/neutral by way of boring and lowering of ISI marked two Nos. G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral and body of the Transformer & other end will be clamped & welded with G.I Pipe as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Installation of 11 K.V. TPMO with Polymer insulator & Fixing clamp. ( TPMO provided by department)

Installation of L.T. incoming panel with metering equipment & fixing arrangments(LS)

Hoisting of 11 K.V. XLPE cable 3X120 mm2. along with 6" dia G.I. Pipe 03 meter long with required clamp etc. (All material provided by contractor)

Hoisting of 11 K.V. XLPE cable 3X185 mm2. along with 6" dia G.I. Pipe 03 meter long with required clamp etc. (All material provided by contractor)

Construction of masonary plinth suitable for 250/400/630 K.V.A. Transformer of size 2X2X1.2 Mtrs with complete civil material & 02 Nos.,100X50 mm, M.S Channel 2.0 Mtr. long and M.S Bar 8/10 SWG complete in all respect as per RESPO norms.

Fabrication and erection of wire mesh fencing 02 Mtr. height with a gate and with retaining wall including grouting of fabricated M.S. Angle 65X65X6 mm. support (05 Nos. in a Sub-Station). Painting of fencing/support with all material as per specification/drawing complete in all respect.

Fixing of 11 K.V. Fuse set as per RESPO specification and direction on E/I. (Fuse unit provided by department).

Grouting and nozzeling of Stay set complete of size 16X1800 mm. with cement, sand, brick-ballast 1:3:6 as per RESPO specification. (All the material will be arranged by the contractor)

Supply and fixing of following material -

Holding Clamp with Nut & Bolt.

Copper Bus Bar

H.T. Connector.

L.T. Connector/L-Piece.

Aluminium Lug for 400/630 KVA T/F

L.T. Clamp.

L.T. Shackel Insulator.

On site required material i.e. (clamp, shackle insulator, l-piece, Nuts & Bolt etc)

Fuse Unit.

Construction of masonry type D.P. Box for 250 KVA Transformer at required place with tabular fuse unit and M.S. Angle Iron support of size 50X50X6 mm. each. All the civil and other material required shall be arranged and provided by contractor for completion of job as per RESPO norms along with necessary laying of cable and its cartage & necessary connections.

Installation and Commissioning of 3 Phase ACDB including cost of all material and carriage charges in all respect as per RESPO norms.

Installation and Commissioning of DCDB including cost of all material and carriage charges in all respect as per RESPO norms.

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work should be carried out under Bussiness Plan 2025-26 9- The work will be done as per norms of UPPCL/RESPO.

SYED TRADERS (BID ID -5226481)

SINGH ENTERPRISES (BID ID -5226554)