WELCOME MAINTENANCE TO VARIOUS QUARTERS AND REPAIR TO FENCING / COMPOUND WALL, GATES, FOOT PATH AND OTHER MISC WORKS AT DGQA COMPLEX BADARPUR UNDER GE (AF) TUGHLAKABAD

Amount

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and complete all as specified and directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters without taking off shutters from the frames complete all as specified and directed by Engr-in-charge.

S&F for Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.

S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron 40mm x 40mm x 6mm including necessay cutting welding etc complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed by Engr-in-charge.

S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.

S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed by Engr-in-charge.

S&F 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.

S&F 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified and directed by Engr-in-charge.

S&F in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed by Engr-in-charge.

S&F 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-charge.

S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-charge.

S&F 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and directed by Engr-in-charge.

S&F 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge.

M&L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified and directed by Engr-in-charge.

M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engr-in-charge.

S&F in repair 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.

S&F in repair for 25mm dia fancy type PVC coated on MS Pipe coloured curtainrod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removesust,etc. complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

S&F virtified ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, complete all as specified and directed by Engr-in-charge.

M&L Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors etc complete all as specified and directed by Engr-in-charge.

Taking down cement plaster/terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engr-in-charge.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirtings etc complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engr-in-charge.

M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-charge.

Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-charge.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in patches in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in patches in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in patches in cement mortar in (1:3) on ceiling complete all as specified and directed by Engr-in-charge.

M&L preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and directed by Engr-in-charge.

All as per item No 56 above but three coat white wash on ceiling complete all as specified and directed by Engr-in-charge.

All as per item No 56 above but two coat of cement base paint on wall complete all as specified and directed by Engr-in charge.

M&L for making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 10 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

S&F in reapir 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F in repair 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastec ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. (Minimum weight 20 mm - 210 gms).

S&F in repair gun metal gate valves with iron wheel head 20 mm complete all as specified and directed by Engr-in-charge.

S&F in repair PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repair 1.0 mtr long Almn door seal with screw complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

S&F in reapir cp 15 mm dia Health Faucet with 1.0 mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.

Supply only water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-charge.

S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hige desity plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair PVC corner bracket golden colour suitable for drapery rod as per sample complete all as specified and directed by Engr-in-charge.

S&F in repair PVC knobs golden colour suitable ISI marked as per sample complete all as specified and directed by Engr-in-charge.

S&F in repair MS Bracket suitable for drapery rod with nuts & bolts as per sample complete all as specified and directed by Engr-in-charge.

S&F in repair for PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVc nut bolts complete all as specified and directed by Engr-in-charge. Note: The cover to be provided 500/1000 ltrs capacity.

S&F in repair of wall mixture 15 mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair Basin mixture 15 mm bore dia cast copper alloy with cap capstan chromium plated screwed down high pressure with or without "Hot" or "Cold" long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.

S&F in repairs bib cock 2 way double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and as direcetd by Engr-in-charge .

M&L for preparation of old plastered surfaces of walls and applying one coat of Cement base paint of approved tint, complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of Oil Bound distemper of approved tint, complete all as specified and directed by Engr-in-charge. Note :- All holes/cracks to be filled with birla putty and making good to old surface).

All as per Item No. 81 above but one coat white wash on ceilings complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engr-in-charge.

Ditto all as per item No 83 above but on steel surface over 10 cm or girth complete all as specified and directed by Engr-in-charge.

S&F in repair stainless steel kitchen rack plate rack over all size 24" x30" complete all as specified and directed by Engr-in-charge.

Dismantling of Fencing Wire Mesh of any type and in any position complete all as specified and directed by Engr-in-charge.

S&F in reapir Galvanised 2 strand, steel barbed wire of 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strain-ing bolts, including securing or tying at crosing with and provision of galvanised mild steel wire, staples or steel pins etc. (each line wire to be measured) complete all as specified and directed by Engr-in-charge.

M&L for concertina coil reinforced punched (chrome rajor or blade wire) with barbed tap of 0.5 mm thick galvanised steel sheet and core wire of dia 2.5mm high tensile steel wire complete all as specified and directed by Engr-in-charge.

S&F Chain Link Fencing of 3.25mm dia galvanised steel wire 100mm x 100mm mesh as in chain link fencing including nibs, clamps, nuts & bolts, straining bolts, FI Strap under fencing, welding and provision of etc and laid / fixed in position complete all as specified and directed by Engr-in-charge.

Dismantling posts / struts (wood, steel or RCC) any section including taking out embedded portion from concrete / brick masonry etc and making good disturbed ground complete all as specified and directed by Engr-in-charge.

S&F Mild Steel Fencing Post and Struts, Channel, Angle or Tee Sections, fixed independently without connecting plates etc cut to ordinary lengths complete all as specified and directed by Engr-in-charge.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed by Engr-in-charge.

Excavating in post holes (or similar holdes), in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed by Engr-in-charge.

M&L for Hard core of broken stone of gauge not exceeding 63mm, deposited,spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface using brick bat complete all as specified and directed by Engr-in-charge.

M&L for Providing plain cement concrete (1:4:8) of type D-2 by using 40 mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for Use and waste of form work to sides of pillars, posts, struts, piers columns and stanchions for rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-charge.

S&F in repairs of zebra blinds, Horizontal type, 75-100 mm wide with polyster fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc fixed cuttings and alteration if necessary whereever AC/ coolers exists complete all as specified and directed by Engr-in-charge.

Dismantling structural steel work including doors, gates in any position complete all as specified and directed by Engr-in-charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also welding fastening and fixing complete Fe-290 (Gde E-165) complete all as specified and directed by Engr-in-charge.

S&F in repair Mild steel, Plain black sheet of 1.25 mm thick as in curtain to steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed by Engr-in-charge.

S&F in repair Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-charge.

M&L for preparation of New or previously untreated steel & Iron surfaces and applying two coats of aluminium paint over a coat of red oxide primer of any discription over 10 cm in width or girth, not otherwise described complete all as specified and directed by Engr-in-charge.

Demolition of brick work built in cement mortar complete all as specified and directed by Engr-in-charge.

M&L for brick work work in cement mortar (1:6) exc. 6m mean radius using old size sub class'B' bricks complete all as specified and directed by Engr-in-charge.

M&L in repair for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) door shutters, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-charge.

S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs aluminium grill of make thicknes not less than 7 mm thick fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and directed by Engr-in-charge.

S&F 5.0 mm thick froasted glass panes and glazing with oil putty or fix in aluminium door / widnow complete all as specified and directed by Engr-in-charge.

S&F in repair 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engr-in-charge.

S&F in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-charge.

Supply and fixed in repairs of 150 mm aluminium handles cast type anodised complete all as specified and directed by Engr-in-charge.

M&L for post construction ATT treatment along the external wall on the junction of wall and floor below concrete or masonry apron using emulsion @ 2.25 litre per metre, 300mm apart and 300mm depth including drilling and plugging 12mm dia holes with white cement to match the existing floors complete all as specified and directed by Engr-in-charge.

M&L for post construction ATT treatment at points of contact of wood/wall panelling/partision board work by chemical emulsion (in oil or kerosene based solution) @ 0.50ltr /hole by drilling 6mm dia. Hole at a down ward angle of 45 degree at 150mm centre to centre snd sealing the same with matching colour complete all as specified and directed by Engr-in-charge.

M&L for flush pointing in CM (1:4) including racking out joints/pointing to brick work or brick tile laid in floors or surface channels roof complete all as specified and directed by Engr-In-Charge.

M&L for making good broken egdes of chajjas slabs, facing, fins etc in patches area not exceeding 1 Sqm of each patch, height upto 12 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC 1:2:4 type B-0, with necessary form work, finished the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Dismantling bricks laid dry flat or on edge and pointed in any mortar complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed by Engr-in-charge.

M&L for 60mm thick machine pressed precast concrete interlocking paver blocks any tiles any size and shape factory casted with grey cement and pigment and conforming to IS 15658-2006 of M-35 Grade and joints filled with sand including 25 mm thick sand cushion complete all as specified and directed by Engr-in-charge.

M&L for PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in foundation, sub base under interlocking tiles, etc complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete block type B1, (1:2:4) (20mm graded aggregate) as in Kerb stone, etc and set in CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L washed stone grit plaster on exterior walls in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15 mm cement plaster 1:1/2:2 (1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) inpanels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in-charge. Note: Payment for providing grooves shall be made separately.

M&L forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finshing the groove complete all as specified and directed by Engr-in-charge.

M&L for gunniting to RCC works in column,beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC(loose concrete) including plaster and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying 25mm to 100 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of sand) using ordinary port land cement of 43 grade over wherever required at any height, complete all as specified and directed by Engr-in-charge. Note:-(i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work or quoted rate. (iii) Work to be carried out as in patches. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.

S&F Steel rolling shutters of 1.25mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated of gear operated type with bevel gear box and crank handle including taking down complete all as specified and directed by Engr-in-charge.

Taking down carefully the hood of steel rolling shutter of size not exceeding 5 sqm each for replacement of unserviceable/ defective parts and refixing in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut, bolts etc. removing of bend, alignment etc to make good the system and to made good the disturbed surfaces of walls including periodicals to match with the existing complete all as specified and directed by Engr-in-charge. Note :- (i) The unserviceable parts to be replaced shall be measured and paid for separately as "Supply only". (ii) Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring etc.

All as per item No 126 above but size exceeding 5 sqm & not exceeding 15 sqm each complete all as specified and directed by Engr-in-charge.

S&F 1.25 mm thickness of Steel laths or top cover bent to shape match with existing for rolling shutters without ball bearing including one shop coat of primer and erected in position complete all as specified and directed by Engr-in-charge.

S&F Ball bearing of any dia for rolling shutters complete all as specified and directed by Engr-in-charge.

M&L for replacement of rolling spring for rolling shutter of size not exceeding 5.0 sqm each complete all as specified and directed by Engr-in-charge.

All as per item No.130 above but for rolling shutter of size exceeding 5 sqm but not exceeding 15 sqm each complete all as specified and directed by Engr-in-charge.

Notes:- Note: 1. All works to be carried out up to Approx 12 mtr height. Rates included to the necessary steel scaffolding required for execution of works upto Approx 12 mtr height from ground floor and disposal of all demolished material from out side the MOD land. 2. The work will be scatted in nature various buildings according to site and according location requirement and as directed by Engineer-in- Charge.

Neeraj Enterprises

akenterprises

Rohan Construction Company

M/S DEVRAJ SINGHAL

M/S S.K.Electricals