WBPWD/AE/RGKARESD/NIQ-10/25-26

Amount

PART-A (A.C WORK) : Supply & delivary 1.5 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 18000 BTU/hr. with 1No. Rotary compressor, 1nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. ( Make: Hitachi/Voltas/Bluestar/O-General/ Daikin/ Similar) [NS]

Supply & delivary 2 TR capacity concealed type Split Air Conditioner of rated cooling capacity of 18000 BTU/hr. with 1No. Rotary compressor, 1nos. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:- 650CFM. ( Make: Hitachi/ Voltas/ Bluestar/O-General/Daikin/Similar) [NS]

Installation, testing & Commissioning Charges for following Air Conditioner. The indoor unit must be supported by structure made of 25 x 25 x 5 mm angle and 25 x5 flat and tie rod incl. necy. Painting for 1.5 Tr/2.0 TR [NS]

Supply, Installation and commissioning of hard / soft copper refrigerant piping, complete with fittings, elbows, bends, globe valve of suction & liquid line with bracket & supporting arrangement on walls 0.6mm thick Liquid line with 9mm thick nitrile insulation. [NS]

Control copper Cabling from ODU Unit to IDU unit of Concealed Split AC 3 Core 2. 5 Sq. mm. Communication Cable. [NS]

Supply & Laying Drain Water piping work out of PVC/HDPE hard pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors.(Mk. Oriplast /Supreme) [NS]

Supply, fixing of M.S. Safety Net Guard for Outdoor unit of 2.0 ton Concealed Split type A.C. machine made with 20mm X 20mm X 3mm thick M.S.Angel and 20 mm x 3mm MS Flat bar of base size-1350mm X 1150mm X 750mm width, covering with 6 SWG square M.S.Net & complete painting with two coats of metal primer and two coats of ICI Synthetic enamel , fixing the same on outer wall by c.c & plastering the same to the original finish and supply of Lock & Key set. [NS]

S & F of GI AC Tray underneath the indoor units of AC machines.

S& Charging of R22/32/410/410/A gas to the machines

PART-B (E.I WORK) : S&F AC machine timer for one no. machine fabricated with double door 8 Way SPNDB as per L&T Cat no-LTSDO8N) i) 240 V, 32A DP MCB of breaking capacity 10KA & ''C'' Charecteristic (L&T)-1 No ii) 22A DP power contactor with 220 coil voltage (L&T, Cat no-MNX22-2P, CS90238)-1 No. iii) Digital timer switch (L&T, cat no-Crono 67DDTO)-1 No iv) Toggle switch -1 No. [NS]

S&F of outdoor type loop Box [Make-Legrand/Sintex] [NS]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [Average run 6 mtr] 2(c)/E-14]

Supply & Fixing 240 V, 2 nos. 6A and 2 Nos. 16 A plug socket with separate 2nos. 6 A and 2 Nos. 16 A Piano key type switch, indicator & 25A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required[NS]

Supply & Fixing of a fabricated set consisting of 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200x120x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 1 nos. 6A, & 1 nos. 20A plug socket with separate 1 nos. 6 A & 1 nos. 20A Piano key type switch, on sheet metal switch board embedded in wall incl. S & F 275x225x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing of a fabricated set consisting of 240 V, 3 nos. 6A, & 1 nos. 20A plug socket with separate 3 nos. 6 A & 1 nos. 20A Piano key type switch, on sheet metal switch board embedded in wall incl. S & F 275x175x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and fixing 20mm PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works [7a/E-16].

Supplying and Drawing 1.1 KV single core (2x4.0 sqmm)+(1x2.5 sqmm)stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/KEi/Gloster) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

2 x 2.5 Sqmm +1x 1.5 Sqmm

3 x 1.5 sq mm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. 2.5 sq.mm [9i/F-5]

4 sq.mm [9iii/F-5]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [Make- Legrand] [5(a)/E-17]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[Make-Legrand][17/E-19]

Supply of Full Metal Body Wall Fan[Make- Orient/USHA/cinni/Havells/Crompton] [NS]

Supply and fixing of ACP board with screws at four corners to seal the ventilators of the rooms.[NS]

Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 100A [Make-L&T]

MODERN ELECTRIC (BID ID -6585344)

P. M. COOLING AND ENGINEERING CO (BID ID -6608971)

CARRYON ENGINEERS (BID ID -6587031)