GE/C-64/2022-23 REPAIR/ REPLACEMENT OF SEWAGE LINE AND CLEANING OF MANHOLE AND SEPTIC TANK INCLUDING COMPREHENSIVE MAINT AT ZONE A IN THE AREA OF AGE B/R-I UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed.

M &L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per Itr, water ratio 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr finished fair and even. Complete all as specified and directed by Engineer-in-Charge.

M &L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per Itr, water ratio 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr finished fair and even. Complete all as specified and directed by Engineer-in-Charge.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement incl scafolding etc, complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying single coat of oil bond destember over one coat of wall care putty on old plastered surfaces of walls complete all as specified and directed.

M&L preparing old decorated surfaces of ceiling and applying single coat of white wash complete all as specified and directed.

M&L preparing old decorated surfaces of wall and applying single coat of white wash complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls removal of surfaceing of existing layered of paint an and applying two coat of exterior emulsion acrylic weather coat paint (Apex) one coat of primer complete all as specified and directed.

Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work complete all as specified and directed.

M & L for snap grid ceiling with E - board ceiling tiles of size 600x600mm 4mm thick incl aluminium alloy anodised at edges angle 25x25x1.5mm and tee section 38x38x1.5 mm at other than edges both ways fixed with 4mm dia gi wire including two coats of oil bound distemper complete all as specified and directed.

S&F for 19/20mm thick Block board grade 2 quality interrior grade commercial type fixed with screws to timber frame work including teak wood leaping and necessary rebating for double shutter where required (Note : teak wood leaping shall be measured and paid separatly) complete all as specified and directed.

S&F MS butt hinges medium weight 75 mm size fixed with MS screws complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel, bright finished complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section 75 mm long and fixed with MS screws complete all as specified and directed.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any discription exceeding 1 sqm each and not exceeding 2 sqm each complete all as specified and directed.

M&L II nd class hard wood Plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with iglue pinned at joints, supplied and fied all as specified and directed.

M&L Mild steel frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd. complete all as specified and directed.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mm for doors, ventilator including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b) complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and as directed.

M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 complete all as specified

S&F Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

S&F MS butt hinges medium weight 100 mm size fixed with MS screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws complete all as specified and directed.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc. complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, roof truss and similar work con- forming to Fe.290.Gde-E-165

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

M&L aluminium alloy powder coated windows including aluminium coated frames silding track, bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windowos with framed shutter including aluminium alloy powder coated snap type beads handles with locking arrngement spring action and glazing clips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted glass/frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed

M&L for aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section 85 mm x44045 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm incl as durected and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required incl handle ,tower bolt ,floor spring heavy duty "SAMRAT" ,looking arrangement "GODREJ" rubber gasket and door stopper complete all as specified and directed.

Material and labour for aluminium alloy Powder coated standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

S&F in repairs stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

S&F stainless steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified.

Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

S & F in repairs floor mounted EWC one piece incl all necessary fittings complete all as specified and directed by Engr -in-charge.

Supply and fix in repairs PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified.

S&F in repairs PVC waste pipe 32 mm dia for wash hand basin, complete all as specified.

S & F in repairs 32mm dia sink waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S & F in repair 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repair Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S&F in repair CP jet spray for EWC with flexible pipe and angle cock/stop cock complete all as specified.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&Fin repairs stop valve, concealed, fancy type , chromium plated brass, screwed down, high pressure screwed both ends for iron pipe or for unions, 15mm bore with long shank and cup complete all as directed.

S&Fin repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed.

S&Fin repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified

S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold complete all as specified.

S&F in repairs of 15mm bore size PVC PTMT bib tap complete all as specified.

S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified.

S&F in repair stainless steel gratings 100mm bore size fixed with cement motar complete all as specified.

S&F in repair toilet paper holder fixed to wall with chromium plated brass screws and rawl/phil plugs complete all as directed all as ppecified .

S&F in repairs chromium plated soap dish fancy type all directed. complete all as directed all as ppecified .

S & F in repair towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

S & F in repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F in repair brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO)of make Jaquar as all specifed and as directed. Code SOL-6281

Material and labour for welding in repairs not exc 2.5 cm in length complete all as directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

S&F Non - skid Ceramic colour tiles 600 x100 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for 18 -20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismentling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete .

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges/gutter to wall, fixed with self tapping screws as specified.

M&L for roof treatment as per the description below including dismantling/taking down existing roof treatment complete:- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified

M & L for PCC 25 mm thk type B-1, 1:2:4 (using 20mm graded stone aggregate) as in roof complete all as specified and directed.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for cement concrete 40mm thick type B-0, 1:2:4 (using 12.5 mm graded aggregate) as in floor for fair finished surfaces of concrete complete all as specified and directed.

M&L for cement concrete 75mm thicktype C-2 1:3:6 (40mm graded aggregate)as in plinth protection and paths laid in alternative panel complete all as specified.

Supply only MS butt hinges medium weight 100 mm size fixed with MS screws.omplete all as specified and directed by Engr-in-Charge

Supply only suitable for 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complerte all as specified and directed by Engineer-in-Charge.

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT in the area of ZONE A (Md accn and all types of Accn including multistory bldg ). complete all as specified and as directed.

Cleaning of GTs in the area of ZONE A (Md accn and all types of Accn) complete all as specified and as directed.

Cleaning of Manhole depth of 0.9 mtr and any size of MH in the area of ZONE A (Md accn and all types of Accn) and taking out sludge and depositing complete all as specified and as directed.

Cleaning of Manhole depth exc 1.2 mtr and above of any size of MH in the area of ZONE A (Md accn and all types of Accn) complete all as specified and as directed.

Cleaning of Sewage line from GT to Ist Manhole in the area of ZONE A (Md accn and all types of Accn) complete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to300mm complete all as specified and as directed.

Cleaning of sewage line n.exc 15mtr length in the area of ZONE A (Md accn and all types of Accn). complete all as specified and as directed. Note-cleaning of sewage line daimeter upto 100mm to300mm complete all as specified and as directed.

Cleaning of Sewage line exc. 15mtr but n.exc. 20mtr in length in the area of ZONE A (Md accn and all types of Accn) complete all as specified and as directed. (Note :- This item will be measured if length exceed from 15.00mtr but n.exc. 20mtr.and cleaning of sewage line daimeter upto 100mm to300mm complete all as specified and as directed.

Cleaning of Sewage line exc. 20mtr but n.exc. 30mtr in length in the area of ZONE A (Md accn and all types of Accn) complete all as directed and as specified. Note :- This item will be measured if length exceed from 20.00mtr.but n.exc. 30mtrand cleaning of sewage line daimeter upto 100mm to300mm complete all as specified and as directed.

Cleaning of Sewage line exc. 30.00mtr and onwards in length in the area of ZONE A (Md accn and all types of Accn) complete all as directed and as specified. (Note :- This item will be measured if length exceed from 30.00mtr.and cleaning of sewage line daimeter upto 100mm to300mm complete all as specified and as directed. Note :- For execution of item from Srl No. 92 to 100 above Agency should deploy minimum of 04 Nos Safaiwala and 01 Nos Supervisors on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families is not adversly affected.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

M&L for 200mm sail-glazed stoneware drain pipes laid in trenches and jointed mplete all as specified and as directed. .

Supply and laying, DWCPE(SN8) 200 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified. .

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl beding, packing under and haunching against the sides for 200mm internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point.

Demolation Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:6 all as specified and directed.

S & F in replacemen precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 450mmx450mmx50mm omplete all as specified and as directed.

S & F in replacemen precast fibre reinforced cement concrete Manhole/drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x50 mm omplete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

Dewatering/desludging of septic tanks, soakage wells etc of any depth, cleaning of all sludge, silt residue of both organic and inorganic nature by manual labour or by mechanical scrappers etc and disposal off the same out side the defence area all as specified and directed by Engr-in-Charge.

Mechanically used water filling Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. (For RRRC and Zone - B.)

M&L for cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete all as specified.

S&F in repair PVC (SWR) bends any radius, 75 mm bore complete all as specified.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 75mm complete all as specified and directed.

Supply and fix in replacement of broken cast iron (sand cast) soil, waste and vent pipes in any length, with or without ears, with cement joints, laid in trenches including excavation and PCC bedding and haunching in below ground level or in floors or fixed to walls with clamps etc, bore of pipe 100mm complete all as specified and directed.

S&F in repair 100 mm bore cast iron bends complete all as specified and as directed.

S&F in repair 75 mm bore cast iron bends complete all as specified and as directed.

S&F Cequered cement concrete tiles with grey cement and pigment 25cm X25cm X 22mm thick set jointed and pointed in neat cement slurry in floors and including 75mm thick cement concrete type D-2 1:4:8 and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 60mm thick M-35 grade any shape and size with grey cement and pigment complete all as specified and as directed.

M&L for sand cushioning under floor/sub base or in foundations including watering and consolidation complete all as specified and as directed.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base all as specified.

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

S&F precast RCC coping/post of size 600x100x40 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

M&L for Reinforced cement concrete nominal mix 1:1.5:3 Type A-1 (20 mm graded agg) in roof of septic tanks & similar items complete all as specified and as directed by Engineer-in-Charge

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and as directed.

Material and labour for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed.

S&F flot valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm complete all as specified and directed.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm complete all as specified and directed.

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed.

S & F in repairs 15 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

S & F in repairs 20 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

Schedule of Credit

imran construction company

a.k constructions

LAMBA ENTERPRISES

PG CONSTRUCTION AND COMPANY

SHREE RAM BUILD TECH

M/S.M.S.Devi.Const.Co

SHIVA ENTERPRISES