SPECIAL REPAIR TO OR MD ACCN BLOCK NO P-117 AT ASHOK NAGAR UNDER GE DEHU ROAD

Amount

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismanteling wrought iron or mild steel of any desc. not otherwise provided for complete all as specified.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conf to Fe-410-w (gdeE-250 quality-A).

M & L for MS work as in wind tie or any other work including cutting, drilling holes etc.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/ valley gutter etc.fixed with self tapping screws as specified.

Demolition of brick or stone work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M & L for brick work with sub class 'B' brick in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing & fixing 10-12 mm thick gypsum board 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified as directed by Engr-in-charge

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing, over and including screed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite screed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Dismantling of PVC water tank of capacity exc 250 ltr & n exc 500 litre complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete

M&L for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, as in vertical surface or skirtings etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match over and including 10 mm th rendering in CM (1:4) complete.

M&L for Non-skid white Ceramic tiles of size 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement over and including backing coat 10mm thick in CM 1:4 all as direced.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

As per above but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Dismantling wooden Boarding of any description

S & F medium density particle board, 18/19 mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified

S & F medium density particle board, 25mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for kitchen cabinet etc complete all as specified

S & F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. (for Kitchen cabinets, cupboards)

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples.

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 100 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete

S & F in repairs 25 mm chromium plated aluminium alloy anodised curtain rails with fixed to brackets, stops, complete all as specified and directed.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 45 above but bore of pipe 20mm

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified

Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified

S&F in repair stop valves fancy type chromium plated with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC SWR Nahani/floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, water seal minimum 75mm, complete all as specified

S&F for chromium plated two way bib cock with wall flange 15mm dia equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S & F in repairs Brass cromium plated shower rose of 125 mm dia complete all as specified.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms.)

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand PVC connection 15mm dia , 450 mm long HDPE pipe etc. complete all as specified

S&F 15mm nominal size,fancy type pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish complete all as specified

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.

M&L for rendering 15 mm and dubbing coat 10 mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:6 finished even and smooth without using extra cement and using chicken wiremesh on wall surface for rendering complete including dobbing coat out complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm and dubbing coat 10 mm thick on stone/brick masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:4 finished even and smooth without using extra cement complete and using chicken wiremesh on wall surface for rendering complete including dobbing coat out complete all as specified and directed by Engr-in-Charge.

M&L for 5 mm thick rendering on ceiling surface in cm 1:3 on concrete surface of roof slab , beam column etc finished even and smooth without using extra cement

M&L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion over and including 3 mm thick wall care putty and a coat of alkali resistance primer etc. complete all as specified and directed by Engr-in-Charge.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall etc. complete all as specified and directed.

M&L for three coat white wash on ceiling surface incl preparation of new plastered surface

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L Two coat of synthetic enamel paint on New steel surfaces over 10 cm width or girth incl prepration of surfaces over red zinc chrome primer complete

M&L Two coat of synthetic enamel paint on New steel surfaces nexc 10 cm width or girth incl prepration of surfaces over red zinc chrome primer complete

S & F Three track sliding anodised aluminium window, Ventilators without sash bar, aluminium section weighing 0.55 kg/m including necessary window frames,shutters, joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S&F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911 : 2010 as in framed work such as grills, grating etc with ends of bars of shouldered and /or riveted, or forged into spikes, framed guard bars barred iron doors ; ladders ; framed balusters; walk ways; railings; framework water tanks and similar work etc complete all as specified

Excavating in Trenches, not exc. 1.50 M wide and not exc. 1.50 M in depth, for Foundation, Manhole, Shafts, well cesspits, pier holes n.exc 10 Sqm on plan and n.esc 1.5m in depth and getting out in Soft/ Loose Soil, complete all as specified and as directed.

Demolition and breaking up drain pipes RCC set in cement mortar 150mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately.

Demolition and breaking up drain pipes RCC set in cement mortar 200mm bore complete all as specified and directed. NOTE: (i)The measurements shall be taken long the centre line of pipe and fittings. (ii)Excavation work shall be measured separately.

M/L 150mm bore reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches including testing all as specified and directed.

M/L 200mm bore reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches including testing all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 200 mm bore RCC pipe.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 250mm in Soft/Loose Soil, complete all as specified and as directed.

Removing the excavated surplus soils exc 1.5KM n.exc 5 KM and depositings where directed at a level n.exc 1.5 mtr above the starting point (Note : Site of disposal of soil is to located by Contractor himself. If any extra lead for disposal of soil behind 5km will be bear by the Contractor)

M&L providing plain cement concrete type B2, 1:2:4 ,(using 40 mm graded stone aggregate) as in surface channels and drains forming fair finished drain or channel inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.all as specified and directed. NOTE : Deduction from the volume of concrete shall be made for the channel opening

Supply and fix for 50 mm thick, 900X650mm, heavy duty, factory made precast RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed.

Supply and fix for 50 mm thick, 600X450mm, heavy duty, factory made precast as in manhole covers without additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair including demolition of existing reinforced cement concrete complete all as specified and as directed.

Supply and fix for 50 mm thick, 600X600mm, heavy duty, factory made precast as in manhole covers with additional frame for fixing RCC (1:2:4) type B1 (using 20 mm graded broken stone aggregate) including MS TMT bars 6mm dia @ 150mm C/C both way and set in CM (1:4) finished the surface even and fair complete all as specified and as directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls

As per above item No 89.00 but 110mm dia

M&Lfor PVC (SWR) vent cowl of 110mm dia

S&F.110 mm dia PVC (SWR) bends, any radius with access door

S&F 110 mm dia PVC (SWR) branch piece (Single Y) equal or unequal.

S&F 110 mm dia PVC (SWR) branch piece double, (Single Y) equal or unequal.

M&L(SWG) gully trap 125/110 mm setting and jointing with solvent cement.

M&L for cement concrete as in sunken floor with M 15 mix using 20mm graded crushed stone aggregate including water proofing liquid @ 200ml per 50kg of cement finished even and smooth complete all as specified (WPC shall be measured separately)

Supply only liquid water proofing compound

Supply and fix in repairs stainless steel plate rack of size 36 inch x 31 inch x 10 inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )as approved by GE.

S&F Anodised aluminium Powder coated louvered ventilator with provision of exhaust fan using jindal aluminiam section or equivalent make as specified including glass 3 mm thick ordinary quality frosted and stainless steel wire mess 0.36 mm dia wire and 1.40 mm aperture etc including taking out old frame shutter complete all as specified.

Taking down old point wiring & M&L for point wiring with 1.5 sqmm two single core multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws Make - poly cab/RR/ Havells or equivalent

All as per item No 100.00 but one light point controlled by one switch

All as per item No 100.00 but One light point controlled by two 2 way switches.

All as per item No 100.00 but One fan point controlled by one switch & regulators

All as per item No 100.00 but One bell point controlled by one switch

All as per item No 100.00 but One socket 5 pin 5 Amps flush type on independent board

All as per item No 100.00 but One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm two single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc . Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S&F switch piano flush type single pole one way 6 Amps

S & F in repair swith piano flush type 250 volts,single pole two way 6 Amp Make- Havells/Legrand/leader/Crabtree

S&F bell push, flush type single pole 6 Amps

S&F bell electric, AC 230 volts, single pole

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing in replacment of LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make : Havells / Bajaj /Philips / Crompton

S & F in repair LED lamp pin type 09 watt all as per directed by Engr In Charge Make : Havells / Bajaj /Philips / Crompton

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make : Havells / Bajaj /Philips / Crompton

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.Note :- Old ceiling fan should be deposited at MES store. Make : Havells / Bajaj /Philips / Crompton

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 225 mm Make : Havells / Bajaj /Philips / Crompton

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

S/F in repair Meter box 2mm thick MS sheet powder coated of size1mtr x 1mtr X 0.25mtr split in two parts 0.4X 1 mtr on top for refixing the meters and .6X 1 mtr for fixing of MCB and DB.The top portion should be provided with glass of size 10cm x 10cm infront of each meters to facilited recording of meter reading and including provision of wooden block of suitable size to fix the meters and DBs, door with locking arrangement and box to be fabricated such as the MCBs can be operated form out side including Removing and refixing of meters(4 Nos) and supply and fix the following:- MCB TPN C curve -63 Amps 415 V-01 Nos MCB SPN 240 Volts 32 Amps including connections complete from electric meter - 04 Nos Note :(I) Rate quoted also includes fixing of the DB completely on walls with necessary cable for internal wiring in the DB,lugs insulators etc and making good the disturdbed surface to match with the existing. (II) Quoted rate inluded the rate of new single phase meter.

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge Make : polycab/ havells/ Gloster

16 Sqmm x 4 Core

10 Sqmm x 4 Core

25 Sqmm x 4 Core

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

M&L for road cutting and making good with PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as directed by Enger -in- charge.

Supply and installed outdoor main control feeder pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 100/160 Amps MCCB as incommer,out going 63/40 MCCB/ MCB SP&N=04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) Rate of MCCB/MCB included in quoted rate. (b) Rate included the Copper bus bar cost.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

Supply and Lay pipe galvanised Medium class including fitting complete 40 mm dia with all connecting items all as per direction of Engr-In-Charge.

Supply and Lay pipe galvanised Medium class including fitting complete 25 mm dia all connecting items all as per direction of Engr-In-Charge.

Supply and Lay pipe galvanised Medium class including fitting complete 20 mm dia all connecting items all as per direction of Engr-In-Charge.

H S TAKHI (BID ID -3472272)

DINESH CONSTRUTION (BID ID -3470541)

S Y Itkar Construction and Company (BID ID -3473211)

SHAILENDRA B TULSANI (BID ID -3473457)