ALHW/DCE A /EE DD /Tend-04/26-27

Distempering one coat with oil bound washable distember of approved brand and manufacture to give an even shade over old cement surface, preparation of surface including cleaning,scraping of the existing painted surface, cost of distemper, brushes, transportation charges, scaffolding arrangments, all labour charges, minor tools etc. complete.(Old work)

Providing and laying 12mm cement plaster of mix 1:4 (1 cement, 4 Mainland river sand) including cost of cement, main land river sand, all labour charges,cost of minor tools,transportation charges, GST,labour welfare cess etc complete. complete.

Two coats on old work painting with synthetic enamel colour Paint Ist quality of approved brand by EIC over steel surface, preparation of surface including cleaning,scraping of the existing painted surface, cost of paint, brush, scaffolding arrangements, transportation charges of all materials to worksite all labour charges,minor tools,including of labour welfare Cess, GST etc. complete.

Painting two coats with ready mixed paint on steel surface of approved brand and manufacture in all shades to give an even shade by cleaning the surface in good manner (steel work two coats) including cost of all labour charges, minor tools, scaffolding charges, GST, labour welfare cess etc. complete.

Providing and fixing the sacrificial anode (Fosroc Galvashield XP or equivalent) over the main reinforcement of pile, pile caps, columns, Deck Beams and Deck Slabs etc. as per the manufacturer specification and sdesigned spacings, as sacrificial anode to the reinforcement against corrosion, Including cost of all materials, machineries and labour charges, minor tools, labour welfare cess, GST, etc., Complete.

Supply and apply of high strength, non shrink cementitious free flow micro concrete (With minimum 28 days flexural strength 50Kg/ Sqcm and Compressive strength 500Kg/ Sqcm- As per BS 4551-80)) for above water level using 12 mm down size graded stone chips with the ratio of 1:0.75 (1 high strength & non shrink cementitious micro concrete chemical : 0.75 12mm to 6mm stone chips) on site to enable completion of pouring in a continous operation. An approved grout concrete mixer of slow speed heavy duty drill and exact quantity of water as recommended should be poured into the mixing vessel with cleaned stone chips of size 12 mm to 6 mm slowly and mix the same thoroughly in a forced action. The mixed material should be placed immediately to positioned form work continously to an average thickness of 75 mm without any gap. Including cost of all materials, labour charges, minor tools, labour welfare cess, GST, etc., Complete.

Providing form work icluding centering shuttering so as to give rough finish strutting and propping etc.height of propping and centering below supporting floors to ceiling not exceeding 4m and removal of the same for in situ reinforced concrete and plain concrete work ,including cost of all materials, all labour charges, minor tools, GST, labour welfare cess etc. complete.

Supplying, mixing and applying CURING MEMBRANE or equivalent with water Including cost of materials, labour charges, minor tools, labour welfare cess, GST, etc., Complete.

Providing and fixing Tor steel reinforcement for R.C.C. work including cutting, bending, binding, and placing in position cost of binding wire, minor tools, cost of all materials, all labour charges, minor tools, GST, labour welfare cess etc. complete.

Supplying, prepraing, and priming the reinforcement steel with Epoxy Zinc Primer or epoxy anti corrosive paint (Confirming to having IS/BS certification), Including cost of all materials, labour charges, minor tools, labour welfare cess, GST, etc., Complete.