PROVISION OF FOOTPATH WITH RAILING IN FRONT OF BAY VISTA AND ADDN/ ALTN AND SPECIAL REPAIR OF COMPOUND WALL/ FENCING (P-159) AT HADDO SPORTS COMPLEX UNDER GE HADDO,PORT BLAIR

Amount

Dismantling of structual steel of any description not otherwise provided for all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground concrete, brick work, masonry, etc complete all as specified and directed

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any n exceeding 4 Kg/ Sqm complete all as directed by Engr-in-Charge

Excavation in post hole in hard/dense soil (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in hard dense soil complete all as specified and directed

M&L for cement concrete 1:2:4 type B1 (Using 20mm graded stone agrregate) as in foundation, filling and mass concrete similar work complete all as specified and directed

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in hard/dense soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed

M&L Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations or mass concrete complete all as specified and as directed

Removal of surplus soil to a distance n exc 50m and deposited where directed at a level n. exc 1.5m above the starting point all as specified and as directed

M&L for mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; as posts and struts in fencing including cutting tops as required drilling holes, notching for wires etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed

M&L for mild steel galvanised PVC coated chain link fencing 3.15mm nominal dia of GI wire, 1.4mm thick PVC coating and average area of aperture 25 sqcm with weight of chain link not less than 3.60 Kg/Sqm complete all as specified and as directed

S & F bands strap, supports, stays for rain water, ventilating pipes, including bolts, if required, hooks (stay), heavy for large gates, hook and pintel hinges, large hasp & staples, chains, hand made sliding bolts, hold fasts, hooks for hanging fan, plain angle cleats for securing purlins to wood trusses or rafters knee pieces inserts, plates washers and similar small articles conforming to Fe-290 Gde E-165. complete all as specified and as directed

Mild steel screw bolts diameter of neck 10mm (machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S & F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard raisl straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as specified and directed

M&L for preparing of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer not otherwise described complete all as specified and directed

M & L for granite 15 to 17mm thick (of any type) tiles machine cut, in skirting/ dado laid over 15 mm dense cement plaster in CM 1:4 set and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls concrete surface of walls including mixing of water proofing compound, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately)

Supply only Liquid water proofing Compound

M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed

M&L Reinforced cement concrete (nominal mix) Type B0 1:2:4 using 12.5 mm graded Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses

M & L for Mild steel TMT bars 5mm dia over upto and including 10mm dia in stirrups, spacers and binders, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard dense soil all as specified and as directed.

M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed.

M & L for providing 100 mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified

Removal of surplus soil to a distance exc. 50m but n.exc 100m and deposited where directed at a level n. exc. 1.5 m above the starting point

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls finished with even and smooth without using extra cement in CM 1:4 complete all as specified and as directed.

M&L for use and waste form work to faces of walls retaining walls, abutments, parapets and like for flat rough finishesd surface all as specified

S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location complete all as specified and as directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M & L for Cement concrete Type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

M&L for preparation of new plastered surfaces of walls/concrete, kerb stone etc of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Returning, filling incl spreading, leveling, watering and well ramming layers not exc 25 cm for cable laying complete all as specified and as directed.

Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 4 core 16 sqmm (laid in terenches, ducts, pole, wall etc) incl taking down old unsv cable all as specified and directed.

Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 50 mm (OD) x 38 mm (ID) alongwith connected accessories like couplers. Bends, end caps etc. for LT cable protection all as specified and directed.

Supply & fix FRP pole box 240 x 130 x 95 mm (inside dimension) consisting of 1 No 50 A 4 Pole connector and 1 No 6-16 A MCB SP (as required) including taking down the old/unserviceable junction boxes all as specified and directed. Make:- Sintex Cat No GS-JB 2817 or equivalent. Hansel.

S & F PVC Insulated and PVC Round Sheathed 1.5 Sqmm 3 core Bright Annealed Bare Copper Conductor Heavy Duty Flexible Cables for Voltage Greade 1100 volts complete all as specified and as directed.

S & F of LED flood light made up of presure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection of cap 150 Watt ,220V 50Hz supply, pressure Die cast aluminium housing and IP66 class I protection, System efficancy > 110/LPW 10KV SPD included, to be fixed on pole mounted iron frame or bracket including removing of the old unserviceable halogen/ any type of light fittings all as specified and directed. Make:- CG model No TFS-507-150-57-60D-SL-GL-NSG or equivalent to Philips/ Havells.

V KARTHICK (BID ID -3109564)

D K Enterprises (BID ID -3115238)

M/s Ramesh Lal (BID ID -3113005)

SKV Engineering (BID ID -3114557)

Reliance Sales Agency (BID ID -3114694)

M/s K Moorthi (BID ID -3110267)

CHANDER SEKER ENTERPRISE (BID ID -3114637)