Providing SOP cable and power wiring for electrical installation for 250LP PSA oxygen generator plant under PM caves in Govt Regional khospital at Reckong Peo District Kinnaur

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.

Group C.

Providing and installation of LED FLOOD LIGHT, energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power leds as light source, suitable for highlighting architectural features or area lighting. also suitable to rough services/installations with IP66 protection suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, Make: Philips, Twinkle , Havells, Syska or any other approved by Engineer-in-Charge.

LED Flood Light 60 Watt.

Providing and installation of following type of Ultra slim decorative LED Batten with extruded aluminium heat sink, with antiglare polycarbonate diffuser and energy efficient constant current, integral electronic driver, suitable for input voltage: 220-240 V, 50/60 Hz, complete with all accesories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required, with two year warranty. Make: Philips, Twinkle, GE or any other approved by Engineer-in-Charge.

LED Batten Light 20 Watt.

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Providing & fixing the louvers/shutters complete with frame for exhaust fans of all sizes as required:-

Shutter for Exhaust Fan 12 Inch.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying & erection of wall/floor mounted MCCB 200 Amp. with bus-bar L.T. Panel approx. size: 850(H)x450(W)x250(D)mm, suitable for Indoor applications, having Main Incomer DN2-250D MCCB-4P 200 Amp. 36KA (L&T) cat No.CM92109OOP1OG with thermal magnetic release O/L & S/C protection, Digital VAF Metering (L&T) cat No.WL411010OOOO showing voltage,current frequency with suitable C.T., R-Y-B Indicating lamp (L&T) with seprate controling MCB SP 6 amp., 200 Amp. AL Busbar, fabricated with 16-SWG CRCA sheet compartmentalized type enclosure, IP:42 indoor protection powder coating shade: RAL 7032-Siemens Grey as per design & drawing including the cost of all accessories, making connections, testing and commissioning etc. as required to the best satisfaction fo Engineer-in-Charge.

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Single pole 6 Amp. Cat-A.

Single pole 16 Amp. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. 40 Amp.Cat-A.

Triple pole & Neutral. 63 Amp.Cat-A.

Providing and fixing following rating, double pole (single phase & neutral) 10 KA breaking capacity 240 volts, Residual Current Breaker with Overcurrent Protection (RCBO), having a sensitivity current up to 300 miliampers, suitable for protection against leakage current, short circuit & over load, the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: L&T, Havells, Schneider or any other approved by Engineer-in-Charge.

Four Module RCBO 63 Amp.

Supplying and fixing of MCB Enclosure Sheet Steel, Phosphatised, Powder Painted MCB DBs with Din Rail (In accordance with IS 13032, IS 8623, IEC/BSEN 60439-3), including earthing etc. as required:- Make: L&T, Havells or any other approved by Engineer-in-Charge.

MCB Enclosure 2-Way.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 way

Double door-6 way

Double door-8 way

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2x1.5 Sq. mm.

2x6.0 Sq. mm.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (twin core)

Armoured cable 50 sq. mm (3.5 core)

Armoured cable 185 sq. mm (3.5 core)

Providing, laying and fixing of one No. FRLS Insulated multicore Industrial Flexible Cable conforming to IS 694:2010 with Bright Annealed Copper conductor Unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Unarmoured Copper cable 25 sq. mm (4-core)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)

Supplying and erection of floor mounted fixed type metal frame work / boards of welded construction for switch gear mounting fabricated with M.S. angle iron (50 mm x 50 mm x 6 mm thick) of suitable dimensions with supporting members grouted 23 cm underground and frame work covered with 3mm thick M.S. sheet from top to a given height, with M.S. angle iron / 50mmx50mmx 6mm thick welded on the back and grouted into the back wall complete with painting and bonding to the existing earth as required:-

Bhim Sain Negi