PROVN OF SINGLE ACCN ALONG WITH TOILET AND BATHROOM AND SPECIAL REPAIR TO 02 X BADMINTON COURT AT MH KHADAKWASLA

Amount

Excavating in trenches n.exc 1.5 mwide and not exc 1.5m deep for foundation etc and getting out in soft/disintegrated rock.

Ditto all as per item no 01 but for each additional 1.5m or part thereof in depth beyond the first 1.5 m in soft/disintegrated rock.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L for RCC M-20 Design mix (20mm graded agg) for foundation, incl rafts, footings, foundation beams,plinth beams, bases for columns etc , basement slab,under reamed piles and mass concrete all as specified.

M&L for RCC M-20 Design mix (20mm graded agg) as in column /pillars, piers, posts and struts etc all as specified.

M&L for RCC M-20 Design mix (20mm graded agg) for beams, cantilevers, bressummers , lintels over 1.5m span etc all as specified.

M&L for RCC M-20 Design mix(20mm graded agg) for chajja all as specified.

M&L for use and wastage of form work to sides of concrete foundation, footings,plinth beams, bases of column etc for rough finished surface all as specified.

M&L for use and wastage of form work to sides of concrete pillars, post, struts, column etc for fair finished surface all as specified.

M&L for use and wastage of form work to beams, lintel etc for fair finished surface complete all as specified.

M&L for use and wastage of form work to chajja etc for fair finished surface all as specified.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for mild steel TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.

M&L precast cement concrete block masonry exc. 10 cm width with solid blocks of PCC ,type C1 1:3:6(20mm graded agg)and setting in cement mortar (1:6) all as specified and as directed by the Engineer-in-Charge.

M&L PCC precast solid block masonary n.exc 10cm in width in PCC type C5,(1:3:6) ( using 20 mm graded stone aggregate) and set in cm (1:4) all as specified.

Damp proof course in cement concrete (1:2:4) type B0 25 mm thk to horizontal or vertical surfaces including necessary formwork

Returning, filling including, spreading, leveling, watering and well ramming in layers n.exc 25cm.

Removal of surplus soil to a distance n.exc 50mtr and deposited above directed at a level n.exc. 1.5 m where the starting point.

M&L moorum filling in floors laid in layers not exc. 20 cm thick spread, leveled & rammed including watering (Moorum brought from outside MD Land)

Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers.

M & L for 100 mm thick cement concrete type C2 (1:3:6) (Using 40 mm gradded stone aggregate) as in plinth protection surfaces finished even & smooth without suing extra cement

M&L for rendering 10mm thick in CM (1:6) on fair faces of block wall or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of newly plastered/concrete or block wall internal & external surface and applying two coats of cement base paint over a coat of alkali resistant primer all as directed

M&L for 3 mm thick wall care putty and applying two coats of distemper oil emulsion.

M&L for rendering 15mm thick in CM (1:4) including water proofing compound at 3% by weight of cement over 10mm thick plaster in CM (1:4) on block wall or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be paid separatly.

Supply only intergal water proofing compound

M&L for joint free non skid coloured ceramic tiles flooring 7mm to 8mm thick (square/rectangular) polished area of each tiles ecx 0.18 Sqm but not exc 0.38 Sqm in floor etc laid bedded over 20mm thick CM (1:6) bedding & pointed in white/coloured cement to match coloured tiles etc complete.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base 100mm thick

M&L for joint free non skid coloured ceramic tiles flooring 7mm to 8mm thick (square/rectangular) polished area of each tiles ecx 0.06 Sqm but not exc 0.11 Sqm in floor etc laid bedded over 20mm thick CM (1:6) bedding & pointed in white/coloured cement to match coloured tiles etc complete.

M&L for joint free coloured glazed ceramic tiles of size 300x450x7mm thick with deigned highliter as in dado/skirting etc set and jointed neat cement slurry and pointed in white or coloured cement to match the colour of tiles incl 10mm thick backing coat in CM 1:4

M&L for mild steel rolled section connected with each other with welding (angle,tee,channel, beam, hollow sections etc) as in main and cross beams, hip,verticle hollow sections and jack rafters, purlins where connected to common rafters and running rails where verticle sections are fixed in welded in wallsin wall surface with plates & other verticle sections are fixed in ground level embedded in concrete fixed and horizontal sections fixed in wall with bolt completly, fixed with angle cleats or other connecting plates conforming to GdeFe-410- W(Gde- E-250) quality- B complete all as specified and directed by Engineer In charge.

M & L for roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc GdeFe-410- W(Gde- E-250) quality- B complete all as directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed by Engineer In charge.

S&F for pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with J-type or L-type or cranked hook bolts drilled with the screws and fixed in horizontal or verticle sections complete all as specified and directed by Engg In charge.(Design and pattern will be approved by GE.)

S&F for pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in as in curved or straight roof covering fixed with J-type or L-type or cranked hook bolts complete all as specified and directed by Engineer in charge

M & L for plates (plain or chequered) channels Fe 410 -W (Gde- E- 250) quality- A-square cut or notched (ordinary and counter sunk) forming holes or weleded to section for supporting the truss with inter welded to each other all as specified and directed by Engineer In charge.

S&F anodised aluminium snap grid frame work Size of grid 605x605mm for false ceiling 6mm GI wire suspended from roof slab/flat sections 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long , 1200mm centre to centre complete all as specified and directed. all as specified

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) as in wash hand basin platforms & vertical cabinet for urinals (including vertical support/member incl fasia etc),steps,jambs etc fixed after and including 20 mm thick CM (1:4), pointing the joint by using (1:2) of white cement, marble dust and colour pigment, all as directed by Engineer-In-Charge.

Labour only for chamferring and rounding the straight and exposed edges of granite stone complete all as specified

M&L for 25mm to 40mm thick unpolished cuduppah stone slab as in wash hand basin platform and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

M&L for providing bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia.

M&L for providing angular stop cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup

S&F vitreous china ware wash basin white, oval shape size 580 X 400mm including 32 mm CP waste coupling, chain and plug, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let PVC connections 600 mm complete

S&F fibre reinforced PVC connecting pipe 60 cm long with brass check nuts and washer both side

S&F vitreous China white water closet ,squatting pan,Orissa pattern ,size 580x440mm ,with integral foot rest ,flush pipe PVC LDPE 32mm dia for low level cistern , including lime concrete bedding.

S&F 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts.

S&F for CI floor trap with PVC grating 75mm dia including jointing to waste pipe fixed in cement concrete type 'B' (1:2:4).

S&F for vitreous china urinal half stall urinal,complete including providing and fixing plugs bedding urinal against wall in cement mortar (1:2) securing urinal to plug with and including 60mm long brass screws,pointing ,around urinal back in cement including PTMT push cock 15mm bore(suitable for urinal) with brackets,flush pipe ,grating and union for discharge pipe and including waste pipe ,inlets and traps etc complete.

S&F unplasticised PVC pipes if pressure rating 10kgf/cm fixed complete to wall, ceiling or in floor etc., pipe size 15mm complete all as spd and directed by Engineer In Charge.

S&F unplasticised PVC pipes if pressure rating 10kgf/cm fixed complete to wall, ceiling or in floor etc., pipe size 20mm complete all as spd and directed by Engineer In Charge.

M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintlesetc and cutting chases for concealed water tubing and making good cutting not exc 10 cm girth as in stone walls complete all as directed

S&F Low density polyethene pipe of preassure rating 6kgf/cm2 fixed complete to wall,ceiling or in floor ,including all necessary assesories as elbow, bend, socket etc as in waste pipes ,40 mm dia bore for wash basin, sink etc complete all as spd and directed by Engineer In Charge..

S&F Low density polyethene pipe of preassure rating 6kgf/cm2 fixed complete to wall,ceiling or in floor ,including all necessary assesories as elbow, bend, socket etc as in waste pipes ,32 mm dia bore for wash basin, sink etc complete all as spd and directed by Engineer In Charge..

M & L for pressed steel frames 105x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate ,etc complete as specified supplied and fixed.complete all as directed.

S & F30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match and other face commercial type including all side lipping wooden fillet wrougnt and fixed to wooden/ steel chowkets all as specified and directed by Engineer-In-Charge.

M & L for 0.9mm thich decorative laminate type I, of surface finish, colour and pattern as approved , fixed with approved adhesive as per maker's instructions

S&F second class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as Part I Ses 8 Cl 8.20 (a), 35mm thick

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening as per specification all as directed

M & L for factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as per specification and as directed by Engineer-In-Charge.

S&F aluminium barrel tower bolt of extruded section and fixed complete length of bolt 200 mm

S&F 250 mm long aluminium sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding boltsof extruded sections complete all as specified and directed

S&F Butt hinges, medium weight, cold rolled, mild steel length of hinges 100 mm

S&F extruded aluminium alloy handle fabricated type annodised size of handle 100 mm

S&F Tubular towel rail brass CP 20mm dia 600mm long all as directed

M&L Gun metal gate or globe valve 20mm with iron wheel head ,screwed both ends for iron pipe

M&L Gun metal gate or globe valve 15mm with iron wheel head ,screwed both ends for iron pipe

S&F PVC low level flushing cistern with dual flushing system including brackets 10 litre capacity COMMANDER/SLIM LINE, with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs.

S&F in stainless steel grating cover 100mm dia fixed in repairs complete

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms)

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs washers and wastes,including bedding in cement mortar to dwarf wall or including finishing cantilever brackets and connecting union to pipe over all size 915x460mm with bowl size 410mmx330mmx160mm.

S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) junction single(single T) complete all as specified and directed by Engineer -in-charge

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer -in-charge

M & L for rotational moulded polyethylene water storage 1000 litres tank (cylindrical vertical with closed top) hoisted and fixed in position and Including 20 mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves all as specified in SSR part I

M & L 100 mm thick Concrete bed Type D2 (1:4:8) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in (for 150 mm pipes ) complete all as specified and directed by the Engineer-in-Charge..

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M&L for RCC M-25 Design mix (20mm graded agg) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like

Extra for forming fair finished drain or channel girth not exc 30cm in cement concrete using extra cement including form mounds etcall as specified and directed by the Engineer-in-Charge..

M&L for providing precast RCC manholes cover with frames of size 0.60m x 0.6mx50mm thick of medium duty etc complete all as specified and directed by the Engineer-in-Charge...

M&L for providing precast RCC manholes cover with frames of size 0.9m x 0.9mx50mm thick of medium duty etc complete all as specified and directed by the Engineer-in-Charge.

M&L for provided reinforced cement concrete pipe 150mm bore class NP-2 with collars laid and jointed with cement all as specified and directed by the Engineer-in-Charge..

Demolition of concrete of any description and in any position not otherwise specifically provided for and rubbish off the premises.

M&L for providing & laying 100 mm thick Cement Concrete with Gde M-20 tremix concrete (design mix) with RMC and tremix machine by using 20mm graded coarse aggregates as in badminton court surface/hardstanding/ roads/ slabs over drain; finished surface of concrete surface by brooming/smooth finish as required etc all as specified and directed by Engineer-In-Charge

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing dressed stone work and pre-cast concrete articles (above or below ground level).

M&L for rendering 15mm thick cement plaster in CM (1:6) on stone masonary/ brick work or concret surfaces, surface finshed even and smooth without using extra cement complete all as specified

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground - Posts embedded in Concrete, brick work, masonry, etc.

Excavation in post holes(or similar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc exc 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft/loose soil complete all as specified and directed

M&L for Rolled mild steel in Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. - S & F - Fe 410 -W (Gde-E-250) quality-B

M&L PCC (1:3:6) type C2 as in foundation concrete ,post holes and filling between roof sheet and wall,using 40mm graded stone aggregate including necessary use and waste of form work.

M&L for forming Contraction (dummy) joint 60mm deep x 5mm wide filled with sealing compound grade 'A' in badminton court surface all as specified and directed.

M&L for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like not exc 10cm wide two coats over primer with road marking paint, white or golden yellow all as completed as directed by Engineer-in-Charge.

M&L for point wiring in and including new concelaed heavy grade PVC conduit not less than 19 mm with the help of multi-stranded unsheathed FRLS copper cable 1.5 Sqmm 650/1100 V of any length conforming IS-3419-1988 adhereing to colour code including earth wire of the size 1.5 Sqmm hreen colour as indicated and shall conform to 14772-2000 for the following:- (a) One light /fan point controlled by one switch one way

Ditto all as per item No 95 above but One 3 pin socket outlet, 5 Amps on independent board.

Ditto all as per item No 95 above but One 3 pin socket outlet, 15 Amps on independent board with cable 4 Sqmm and 4.0 Sqmm as earth wire of any length.

M & L for socket outlet conform IS 4615-1968, 2 in 1, 3 Pin 6/16 Amps.

M & L for switch piano flush type Conform IS 4615-1968 16 Amps single pole one way.

M & L for switch piano Conform IS 4615-1968 flush type 6 Amps single pole one way.

M & L for socket outlet conform IS 4615-1968, 2 in 1, 3 Pin 6 Amps.

M & L for electronic step type ceiling fan regulator conform IS 4615-1968 120W, flush type.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5mm.

S&F in 1x18/20W,230V surface and wall mounted LED batten (Single side connection) T8 luminaries with one 18x20/Watt LED retrofit T8 polycarbonate tube (Single side connection) and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified. Make: Havells cat part No. ENDURALINEANEOBS20WLED865SPCWH or equivalent in Wipro/Luker.

S & F ceiling fan of sweep 1200 mm 240 volts, 5 star BEE rating milk white coloured connecting up with twin core 1.0 Sqmm cable from ceiling rose including required length of down rod and hook accessories complete all as specified. Make: Crompton/Orient/Havells

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised earth lead wire 4.0 mm dia of minimum 15 m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR part-I connected to earthing lest point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work testing on completion etc all as specified

S&F in repalacement MCB DB 06 way SPN single door sheet metal enclosure IP-43 protection factory made suitable for MCB DBs 240 volts with 200 Amp rated busbar, neutral & earthing link bar surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circults and refixing the new DBS and existing circults complete as reqd at site

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

S&F MCB SP 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel stip or wire armoured, electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core .

Supply and filling sand with clear dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as directed.

Supply and laying sub class 'B' bricks well burnt for cable protection laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and directed by Engineer-in-charge.

M/S SHREE CONSTRUCTIONS

Harish Enterprises

SUN Enterprises

M/S OMSAI ENTERPRISES

ELIEYAS TRADERS