ADDITION ALTERATION TO NO-03 AIRMEN MESS UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STATION AGRA

Amount

M&L for brick work with fly ash bricks, old size, class designation 75 (Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for Virified Ceramic tiles dark shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on other than fair faces of brick wall finished rough to fix tiles complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles including dismantling of old tiles complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work with mixing WPC@3% by wt of cement including finishing the surface even and smooth including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete as specified and directed. (Note-Integral water proofing compound deemed tobe included in this item)

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete as specified and directed.

M&L two coats of oil bound distemper on newly plastered wall surfaces including preparation and 1mm thick wall care putty complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including 1 mm thick wall care putty and over priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on newly plastered surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats.

M&L for preparing surfaces for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including 1 mm thick wall care putty and over priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old plastered surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats.

M & L for preparation of old plastered or unplastered surface of wall including brooming down steel brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying wall care putty minimum 1 mm thick, a coat of primer and two coat oil bound distemper complete all as specified and drected.

M & L for preparation of old plastered or unplastered surface of ceiling including brooming down steel brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying wall care putty minimum 1 mm thick, a coat of primer and two coat oil bound distemper complete all as specified and drected.

M&L for 75mm thick cement concrete type C-2 (1:3:6) (using 40 mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement including demolition of exixting PCC (below or above ground level) (unreinforced) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down steel sheeting complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down steel sheeting complete all as specified and directed.

M & L for providing cement concrete (1:2:4) type B-0 in roof kerbs /lintels upto 1.5m clear spanl cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down of existing steel pipe and connections complete all as specified and directed.

S&F & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down of existing steel pipe and connections complete all as specified and directed.

S&F & testing 25 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors including taking up or down of existing steel pipe and connections complete all as specified and directed.

S&F in repair stainles steel sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting unions to pipe over all size 915mm x 460mm with bowl size 410mmx330mmx160mm complete all as specified & directed.

S&F 32 mm dia Semi Rigid PVC waste pipe for for sink and wash basin with length not less than 700 mm complete all as specified & directed.

S&F in position rotational moulded polyethylene triple layered water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position with and including ball valve 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) and dismatling of exisitng tank complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F drapery rod fancy type made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,colour and pattern approved by GE over all dia 28-29mm complete all as specified and directed.

S&F MS brackets with hold fasts suitable for drapery rod/ curtain rod 25mm dia and fixed to wall (concrete/ brick masonary) with the help of 2Nos 50mm long steel screws and rawl plug including drilling with electric drill and making good the disturbed surface complete all as specified and directed.

S&F fancy type, hard plastic finial of 28-29mm bore, decorative type, of best quality to suit the drapery rod/ curtain rod and fixed at the end of curtain rod with suitable adhesive colour and pattern as approved by GE complete all as specified and directed. .

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

S&F stainless steel wall cladding consisting of SS-304 having wall thickness of 1.25 mm screwed into MS square tube grid 1.2 m x 1.2 m, using tube of size 25 cm x 25 cm x 3.25 mm thick (Medium class) with using SS screws and washers of adequate length. The screws shall be placed at a distance of 150 mm and shall be fixed to the MS square tube grid and the edges shall be moulded/SS equal angles to be provided, including polishing and framework complete as per manufacturer instruction complete all as specified and directed.

M&L for PVC false ceiling consisting of 600 mm x 600 mm, 5 mm ( + 0.25) thick plain embossed PVC sheet of density 600 Kg/cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using powder coated aluminium T-section of size 1" x 1" (25 x 25 mm, 19 gauge or 1 mm thick ) in square pattern of grid sizes of 2' x 2' (600 x 600mm) . The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I wire/ 6 mm M.S rods of required sizes to maintain proper level etc. The aliminium framwork is supported on side wall with the use of aluminium L-section of size 1" x 1" (25 x 25 mm) angles etc. complete all as specified and directed.

S&F for framed work as in doors or gates of angles including cupboard in shelves, drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing confirming to Fe-290, Ged E-165 complete all as specified and directed.

S&F for 1 mm thick MS plain sheet in hearths, covering to door shutters including cup board shelves, covering to door chowkhats etc. including welding/bending complete all as specified and as directed.

M&L providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM complete all as specified and as directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite including dismantling of existing stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) including dismantling of existing stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

M&L for polishing existing Kota stone floor 20-25 mm thick ocomplete all as specified and as directed Note:- Joint filing with grey cement and repolish the same complete all as specified and .)

M&L for 25mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for Vitrified Endura PRM 10 mm thick parking tiles size 300 x 300 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for providing and laying 60 mm thick factory made chamfered edge precast Cement Concrete paver blocks (interlocking tiles) of M-35 grade with any colour,design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer,through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for PCC type D2 1:4:8 (40 mm graded stone agg) as in foundations, filling and mass concrete complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft loose soil complete all as specified and directed.

M&L for cement concrete type C-2( 1:3:6) (using 40 mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

M&L in repair pre-cast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) cover slabs for man-holes etc set in CM (1:6) incl demolition complete all as specified and directed. Note: Steel reinforcement to be paid separately under respective item

M&L for mild steel TMT bar 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L PCC ( 1:2:4) type B-0, padding in averaging on RCC roof slab or terrace with using WPC @ 2% by mix weight of cement including finishing even and smooth with using extra cement including demolition of existing cement concrete of any description from RCC roof slab (Padding) not otherwise specifically provided for and removal of material to out side MOD land complete all as specified and as directed. .

M & L for providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof with following procedure complete all as specified and directed:- (a) Cleaning existing surface properly. (b) Applying First coat of bitumen primer @ 0.30 litre/sqm on prepared surface. (c) 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702 (d) 3rd course of Laying roofing membrane APP modified Polymeric membrane using butane torch by torch application with 10cm side laps and 15cm end lap. Physical property of membrane shall be as under :- (i) Membrane thickness minimum-3 mm (ii) Membrane weight minimum- 3.00 Kg/Sqm. (iii) Non woven polyester weight not less than 150 gsm/Sqm. (e) 5th course, the top most layer shall be finished with PCC tiles laid with cement mortar 1:4 mixed with 5% integral water proofing compound by weight of cement over a 20 mm layer of cement mortar 1:4 and finished neat complete all as specified and directed

M&L for 30cm X 30cm X 20mm thick PCC tiles, machine pressed factory made as per IS-1237-1980 (ISI marked) laid over 20mm thick screed bedding in CM (1:4) mixed with water proofing compound @ 5% by weight of cement and tiles joints shall be filled with polymer based cement proof joint filler manufactured by approved company incl dismantling of tiles complete all as specified and directed. (Note-Integral water proofing compound deemed tobe included in this item)

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC with and including 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos angle iron brackets including,15mm dia fancy type CP pillar tap swan neck, 32mm dia PTMT waste coupling, and 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti syphonage and providing cement concrete bedding complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair stop valves/angle valve 15 mm nominal bore, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed .

S&F in repair Chromium plated 20mm dia, D type,60cm long towel rail with towel racks fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and directed.

S&F in repair CP grating doom 100 mm dia with or without hole complete all as specified and directed.

S&F in repair PTMT soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings complete all as specified and directed.

S&F 30mm thick factory made moulded solid panel prelam PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 40mm x 20mm for stiles, top lock and bottom rails MS frame shall be covered by heat moulded PVC 'C' Channel of size 30 x 100mm forming styles and 5mm thick prelam 125mm wide PVC sheet for top, lock rail and bottom rail on either side of panel. Paneling of 10mm prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with 30mm wide x 5mm thick prelam PVC sheet beading on either side. An additional 5mm thick prekam PVC sheet strip of 20mm width is to be struck on the interior side of 'C' Channel usinjg PVC cement solvent as per specification & drawing complete all as specified and directed.

S&F 35 mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F 35mm thk 2nd class Hard wood Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with gauging clip/strip complete all as specified and directed.

S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows complete all as specified and directed.

S & F 100 mm long medium weight, stainless steel hinges complete all as specified and directed.

S&F stainless steel tower bolt of extruded section size of bolt 100mm for door shutter complete all as specified and directed.

S&F Chromium Plated handle cast type anodized 150 mm size for door shutter complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint to steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of new surfaces complete all as specified and directed.

M&L one coats of synthetic enamel paint on old steel surfaces of any description,over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.

M&L for applying two coat of synthetic enamel paints on wooden surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) not exc 1.5 sqm complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm mtr and not exc 2 Sqm in each including resecuring or easing and adusting etc and refixing in same opening complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sqm but not exc 4 sqm complete all as specified and directed.

S&F steel tank cover with zinc coating, dia of cover 500 mm and height 150mm of cut spherical shape and gas welded of spikes 2mm dia and 50mm length at 50mm c/c both bay in zig zag motion with ms hinges, hasp and staple fixed to existing PVC water water storage tank of any capacity including dismantling of old pvc water tank cover complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster and putting aluminium channel in groove of required size complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc.

M&L for point wiring for light/fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH with and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise press steel sunk box having thickness not less than 2 mm with 3mm thick ISI marked bakalite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLSH as earth continuity conductor connected to common earth dolly in , cutting chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per Item No 81 above but for 5 pin 5 amps socket outlet independent board

All as per Item No 81 above but for 3 pin 5 amps socket outlet on same board with other switch

All as per Item No 81 above but for one 3 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 sqmm and green colour earth cable size 2.50 sqmm.

S&F modular type switch piano flush type one way 6 amps with led indication lamp 240 volts 1 module completed all as specified and directed.

S&F modular type switch 1-way, 16 amps flush 230 volts 1 module complete all as specified and directed.

S&F modular type socket 3-pin 6- amp 240 volts 2 module complete all as specified and directed.

S&F modular type socket 3- pin combined 6/16-amp 240 volts complete all as specified and directed.

S&F ceiling rose 65 x 50 mm three terminals completed all as specified and directed .

supply and fixing in replacement of modular switch single pole one way 6 amp one module completed all as specified and directed .

supply and fixing in replacement of modular switch single pole one way 16 amp one module completed all as specified and directed .

supply and fixing in replacement of modular socket 6 amp multipurpose 2 in 1-2/3 pin combined 2 module completed all as specified and directed .

S&F in replacement modular type socket 6/16-amp multipurpose 2 in 1 -2/3 240 volts combined 2 complete all as specified and directed

S&F in replacement of fan modular regulator , electronic stepped type 5 stage speed regulation . ISI marked completed all as specified and directed

S&F modular cover plate with frame 1/2 module completed all as specified and directed .

S&F modular cover plate with frame 3 module completed all as specified and directed .

S&F modular cover plate with frame 4module completed all as specified and directed .

S&F modular cover plate with frame 6 module completed all as specified and directed .

S&F modular cover plate with frame 8 module completed all as specified and directed .

S&F modular metal flush box suitable for 1/2 module completed all as specified and directed .

S&F modular metal flush box suitable for 3 module completed all as specified and directed .

S&F modular metal flush box suitable for 4 module completed all as specified and directed .

S&F modular metal flush box suitable for 6 module completed all as specified and directed .

S&F modular metal flush box suitable for 8 module completed all as specified and directed .

S&F in replacement of wall/surface mounted type LED light fitting batten tpe complete with LED 1x20 watt (4 feet long) extruded aluminium body with neat sink provide for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable completed all as specified and directed .

S&F in replacement of recess mounted square type LED light 12 watt aesthetically designed LED fitting, housing with all accessories including connecting up with 3 core twisted flexible copper conductor cable completed all as specified and directed .

S&F in replacement of submain wiring with two single core PVC insulated FRLSH flexible copper conductor cable of size 4 sqmm and one single core PVC insulated FRLS flexible copper conductor cabe green colour of size 4 sqmm as art lead n & included concealed pvc conduit medium grade cutting chase two wall for laying conduit and making good the distributed wall surface to match with existing completed all as specified and directed .

Supply instalation and Commissionig of SS Exhaust hood of size 1800 x 900 x 600 MM with SS baffle filter in 18 SWG thick stainless steel of grade 304 complete all as specified and directed .

Supply instalation and Commissionig of SS Exhaust air ducting 24 SWG thickness of sheet bend into required shape , all parts hinged together with rubber gasket zinc cotted nut bolts to remove air gap completed all as specified and directed .

S&F 550 mm diameter Axial Fan ( Exhaust blower machine) with minimum air flow capcity oe 5000 CFM attached with 2 HP motor with minimum 1440 RPM of approved make included fixing at site completed all as specified and directed .

S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single pole and neutral 240 volts, 4 way, including suitable size copper bus bar and neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed.

S & F in replacement of MCB TPN 240 volts "C" curve of rating from 63 amp with rupturing capacity 10 KA, including providing thimble for out going cables completed all as specified and directed .

S&F for sub main wiring with 4 runs of 6 sqmm single core PVC FRLS insulated unsheathed cable 1100 Volts grade multistranded with copper conductor drawing through rigid PVC conduit medium grade of 25 mm dia including conduit and conduit accessories such as bends,tees,junction boxes concealed/surface type on walls roof, floors etc including 2 run of 4 sqmm PVC insulated FRLS copper conductor cable as earth continuity wire including taking down unserviceable sub main wiring and conduit all as specified and directed. (Note: 4 Run of 6 Sqmm cable and 2 run of 4 Sqmm cable and 1 run of PVC conduit shall measured as one unit)

M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of Gl up to test point, GI tubing 15 mm bore medium grade protection pipe, Gl watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil, removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR-2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).

THENUA BUILDERS (BID ID -3500234)

rohan traders (BID ID -3506448)

aman construction & general suppliers (BID ID -3500085)

scjha&sons (BID ID -3500542)

SHRI RADHAYSHYAM JHA (BID ID -3500403)