Construction of Incubation Centre at KVK Kukumseri ( L and S ) under CSKHPKV, Palampur . ( SH Providing and fixing of Electrical Installation

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable/wire of Polycab/KEI/Finolex make in surface/recessed steel conduit ISI mark and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Polycab/KEI/Finolex make).

Wiring for circuit / sub-main with 3x25+1x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (3x25+3x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (Polycab/KEI/Finolex make).

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/KEI/Finolex make).

3x1.5 Sq. mm.

5x1.5 Sq. mm.

3x4.0 Sq. mm.

5x4.0 Sq. mm.

3x6.0 Sq. mm.

5x6.0 Sq. mm.

5x10 Sq.mm.

Supplying and fixing of following sizes of steel conduit along with the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required (ISI mark)

25 mm. dia

32 mm. dia

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required (ISI mark)

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required (ISI mark)

Supplying and fixing ceiling rose on the existing junction box / wooden block including connections etc. as required. Anchor (Jumbo 2/3 plate)/Havells make.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:- (Anchor/Havells make)

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required. (ISI mark)

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required. (ISI mark)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. (L&T/ C&S/Legrand/Havells Make)

100 Amp. -10 KA (Four Pole)

125 Amp. -16 KA (Four Pole)

200 Amp. -25 KA (Four Pole)

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Single pole. (L&T/ C&S/Legrand Make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Double pole. (L&T/ C&S/Legrand Make)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required. Triple pole & Neutral. (L&T/ C&S/Legrand Make)

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. (L&T/ C&S/Legrand Make)

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. (L&T/ C&S/Legrand Make)

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-6 way

Single door-16 way

Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 25mmx5mm G.I. strip at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing 8 SWG (4 mm dia.) copper wire on surface or in recess for loop earthing as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size Armoured cable 50 sq. mm (3.5 core) (Havells/KEI/National make)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. Exhaust Fan, Light duty, (Domestic) 300 mm sweep. Crompton (Brisk Air Neo) make.

Supplying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing ultra slim polycarbonate LED batten tube lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack complete with all accessories, connections, testing and commissioning etc. as required. 36watt-LED (Havells or equalvant make)

Providing and fixing LED outdoor luminaries energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith Street light bracket, electronic driver complete with all accessories, connections, testing and commissioning etc. as required. 50W LED 6K (Havells make)

Supplying and fixing twin core PVC insulated weather proof aluminium conductor cable with GI bearer wire 8SWG as required complete in all respect. 2 Core 6 sq mm

Supplying and drawing following size of PVC insulated, 3 core 2.5 sq. mm PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/Havells/KEI/Finolex make).

Supplying and drawing following size of PVC insulated, 3 core 4 sq. mm PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/Havells/KEI/Finolex make).

Supplying and drawing following size of PVC insulated, 4 core 4 sq. mm PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/Havells/KEI/Finolex make).

Supplying and drawing following size of PVC insulated, 4 core 6sq. mm PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/Havells/KEI/Finolex make).

Supplying and drawing following size of PVC insulated, 4 core 10sq. mm PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required. (Polycab/Havells/KEI/Finolex make).

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness (ISI Marked).

Ajay (BID ID -491062)

M/S sharma electrical and contractor (BID ID -491809)

M/s On Time Power Service (BID ID -491800)