MISC REPAIR TO DRAINS, COMPOUND WALL, FENCING AND HARD STANDING IN

Amount

Demolition of cement concrete of any description and in any position etc complete all as specified and directed

Demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

Demolition of cement concrete unreinforced in ground floor of pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of rubbled stone masonry including all qoins arches, pillars etc built in cement mortar complete all as specified and as directed.

M&L for extra over stone walling for hammer dressing to face stones and dressing to face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression 40mm on face from straight edge held against the dressed surface n.exc complete all as specified and as directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for rendering 20 mm thick cement plaster in cement mortar 1:4 on stone masonry surfaces finishing the surfaces fair and even complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in surface channel, bed of drains and other similar work complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed.

M&L for reinforced concrete pipes class NP3, laid and jointed complete with collars bore of pipe in 300 mm including breaking up existing concrete pipe pipe complete all as specified and directed.

M&L for cement concrete bed 100 mm thick 1:3:6, type C-2 (using 40 mm graded stone aggregates) for 300 mm bore cement concrete pipes including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings,plinth beams; bases for columns, etc.;under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in Columns, pillars, piers, posts and struts and the like, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.

M&L for form work to sides of concrete foundation , footings .base of columns,sides and soffits of plinth beams and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams,lintels,shelves and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for MS TMT bars 10 mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for MS TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed .

M&L for rendering 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick /Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick / concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. of walls complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brick work, masonary, etc and making good disturbed gound complete all as specified and directed .

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Excavating in post holes in any type of soil each n.exc 0.5 cum , getting out and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed .

M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) as in foundation, filling, mass concrete, sub-floors, floors etc complete all as specified and directed

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished complete all as specified and directed.

S&F mild steel angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting or riveting, etc, and similar work and similar conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, includinig cranking, bending spirally for hooping of columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips quality confirming to Fe-410 W complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or sguare heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or screw nut n.exc 5 cm long dia of shank 12 mm complete all as specified and directed.

Supply only mild steel galvanized chain link fencing of 4mm dia wire and 75mm X 75mm mesh size complete all as specified and directed Make:-TATA/SAIL/JINDAL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

M&L for painting steel surfaces exc 10 cm in width or girth with two coats of synthetic enamel paint over a coat primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly steel and iron surfaces of any description n.exc 10cm in width or girth when connected with other painting, applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.

M&L for hardcore of gauge n.exc 63 mm, with broken stone or boulderes deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

M&L for machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade complete all as specied and directed.

M&L for crushed quarry stone dust filing under floors or in foundation or cusion bed to lay over paver blocks complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in sub base finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65mm deep x 12 mm wide, filled with sealing compound Grade 'A' complete all as specified and directed

M&L for form work to edges of concrete flats fair finished, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 10 cm wide complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6m mean radius in CM 1:6 including demolition of brick work including all qoins arches, pillars etc built in cement mortar complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out. complete all as specified and directed.

M&L for 150 mm bore reinforced cement concrete pipes class NP-2 with spigot and socket laid and jointed including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe of 150mm bore pipe set in cement mortar complete all as specified and directed

M&L for 100 mm thick concrete bed to drain pipes including packing under for 150 mm bore NP-2 pipe haunching against the sides of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregates) complete all as specified and directed

M &L for brickwork with subclass 'B' using old size bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of brick work including all qoins arches, pillars etc built in cement mortar complete all as specified and directed.

M/S vikas jain

siddhant construction

M/s Mohan Singh