8461 REPAIRS TO CHAJJAS,PLASTERING AND DAY TO DAY MAINTENANCE AND INTERNAL ELECTRIFICATION IN OTM ACCOMODATION AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Demolition of reinforced cement concrete as in beams, columns, footings and slabs complete all as specified and directed.

Material and labour for RCC 1:2:4 (Nominal Mix) type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down Chowkhats or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 Sqm and n exc 4.00 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n exc 2.00 Sqm each and removing from site complete all as specified and directed.

Taking down shutters exceeding 1.0 Sqm and not exceeding 2 Sqm and refixing in the same opening after easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.if any complete all as specified and directed.

Taking down glass door shutter of size exc 1.00 sqm and not exc 2.00 sqm and refixing in same opening after necessary repair etc complete all as specified and directed.

Material and labour for second class hardwood Plain, solid, straight Chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications complete all as specified and directed.

Material and labour Flush door shutters, 30mm thick, solid core construction, with both faces is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Supply and fixing glazed or gauged shutter 35 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as per specified and as directed.

Supply and fixing glazed or gauged shutter 30 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) all as per specified and as directed.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 125mm long complete all as specified and directed.

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed.

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed.

Supply and fixing in repairs Butt hinges, medium weight, cold rolled mild steel, and fixed 75mm long complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed

Supply and fixing in repairs aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified and as directed

Supply and fixing aluminium anodised barrel tower bolts of extruded section 75 mm complete all as specified and as directed

Supply and fixing in repairs aluminium anodised barrel tower bolts of extruded section 100 mm complete all as specified and as directed

Supply and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed

Supply and fixing in repairs Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and as directed

Supply and fixing Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed

Supply and fixing in repairs Extruded aluminium handles fabricated type anodised 100mm long complete all as specified and as directed

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed

Supply and fixing in repairs for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and as directed

Supply and fixing in repairs rubber door seal/snake guard 750mm to 1200mm long with 25mm wide aluminium strip fixed at bottom of door to prevent entry of snakes/insects as per sample complete all as specified and as directed.

Supply and fixing 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing in repairs 140mm/150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fixing in repairs brass Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces exc 10cm width or girth including preparation of surfaces complete all as specified and as directed

Supply and fixing in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed

Supply and fixing aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium, wire staple complete all as specified and as directed

Supply and fixing sheet glass ordinary quality 4mm thick in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete complete all as specified and as directed

Material and labour Powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

Material and labour Powder coated aluminium windows shutters, sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and as directed

Material and labour for powder coated aluminium ventilator shutters, hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified.

Material and labour Powder coated aluminium door shutters, aluminium section weighing not less than 1 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and as directed

Supply and fixing brass 4-levers Mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed.

Supply and fixing in repairs brass 4-levers Mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed.

Material and labour for 5.50mm thick sheet glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and as directed

Material and labour for 9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber frame work complete all as specified and as directed.

Supply and fixing in repairs double action floor spring hydraulically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply and fixing in repairs Door closer Aluminium Extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Material and labour for 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed

Supply and fixing in repairs 100mm Hasp and staple, safety type, anodised aluminum with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

Supply and fixing in repairs for 300mm, ordinary rat tail rod pattern springs including roller and plate complete mild steel of size complete all as specified and as directed

Supply and fixing in repair 25mm dia fancy type stainless steel curtain rods including curtain brackets complete all as specified and as directed.

Supply and fixing in repair 20mm dia curtain rails, aluminium anodised with fixing brackets, stops, rollers etc. complete all as specified and as directed

Supply and fixing in repairs Vitreous china Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, S Trap including connection to drain (or outgoing pipe) and to flush pipe, anti siphonic pipe, complete all as specified and as directed.

Supply & fix in repairs Vitreous china squatting pan 'Orissa' pattern of size 580mm ˣ 440mm white with integral foot rest excluding flushing cistern & flush pipe including provision of concrete bedding complete all as specified and as directed.

Supply and fixing in repairs Vitreous china wash down water closet pan (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminized hinge device complete all as specified and directed by EIC.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and as directed.

Material and labour WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Supply and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors including taking down existing steel tubing for taking into credit complete all as specified and directed by Engineer in charge.

Supply and fixing or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or in floors including taking down existing steel tubing for taking into credit complete all as specified and directed by Engineer in charge.

Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth.

Supply and fixing in repair stop/Angle valves fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe complete all as specified and directed.

Supply and fixing in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections complete all as specified and directed.

Supply and fixing in repairs 15mm bore bib taps Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repair two way bib taps fancy type with flanges chromium plates screwed down high pressure for 15 mm dia bore pipe complete all as specified and directed.

Supply and fix in repairs brass chromium plated shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repair 100mm dia Stainless steel anti cockroach trap including chrome finished jali with provision to receive the waste water pipe and fixed with white cement all around complete all as specified.

Supply and fixing in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

Supply and fixing waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed.

Supply and fixing PVC bath cabinet with built in shelf and looking mirror at shutters of size 54 x35x 13 CM complete all as specified and directed.

Supply and fix in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated complete all as specified and directed.

Supply and fixing in repairs corner glass shelf (with brackets) complete all as specified.

Supply & fixing in repairs Soap Dish Holder complete all as specified and directed.

Supply and fixing in repairs Vitreous China Urinal, Half stall type (Size: 355x340x535mm) ,white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and as directed.

Supply and fixing in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) complete all as specified and directed.

Supply and fixing in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) complete all as specified and directed.

Supply and fixing in repairs of ball brass valve, high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and directed.

Supply and fixing in repairs 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

Supply and fixing 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing in repairs flexible PVC waste pipe of size 32mm dia for wash basin & sinks complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints 75 mm dia bore pipe including all necessary fittings like elbow, bend , Tee etc ,fixed to walls/roof/floor etc including dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints 110 mm dia bore pipe including all necessary fittings like elbow, bend , Tee etc ,fixed to walls/roof/floor etc including dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls complete all as specified and directed.

Supply and fixing PVC (SWR) branch piece single Y equal or unequal 75mm with access door complete all as specified and directed.

Supply and fixing PVC (SWR) branch piece single Y equal or unequal 110 mm with access door complete all as specified and directed.

Supply and fixing fix PVC (SWR) bends 75 mm with access door complete all as specified and directed.

Supply and fixing fix PVC (SWR) bends 110 mm with access door complete all as specified and directed.

Supply and fixing PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

Supply and fixing PVC (SWR) multi floor trap with grating including jointing with solvent cement of outlet dia 75mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level) including removing the debris off from MoD land complete as directed by Engr-in-Charge.

Material and labour for providing 40mm thk cement concrete of type B-1, 1:2:4 (20mm graded aggregate) finished even and fair as in floor complete all as specified and directed.

Material and labour for cement concrete type C-2, 1:3:6 (40 mm graded aggregate) 75 mm thick as in plinth protection finished even without using extra cement complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including provision of screed bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars and angle iron fixed at top complete all as specified and directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone wall and concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for rendering 15mm thick on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces mixed with liquid water proofing compound 0.2% by weight of cement including necessary scaffolding complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces on wall surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for rendering 5mm thick in CM 1:3 on concrete surfaces in ceiling finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including a coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material and labour Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2mm thick wall care putty complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces & applying three coat of white wash on ceilings complete all as specified and as directed..

Cutting / uprooting any type of trees/ plants over RCC roof / facia etc and after uprooting the area treated with spreading deweeding chemical and area making good by using PCC 1:2:4 (using 12.5mm graded stone aggregate) and finished with adjoining surface etc complete all as specified and as directed.

Cleaning of water tanks of capacity exc 250 and not exc 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

Cleaning of water tanks of capacity exc 500 and not exc 1000 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

Cleaning of water tanks of capacity exc 1000 and not exc 2000 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) including fittings for taking into credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

Material and labour for point wiring with 1100 Volts, FRLSH grade 1.5 Sq.mm Single core, PVC Insulated, unsheathed, multistranded copper conductor cable, confirming to IS - 694 drawn through and including PVC conduit 20 mm dia including all accessories concealed in walls / roofs / floors / ceiling etc. and pressed GI modular box including earth continuity conductor with colour coding and connecting to earth dolly for light/fan point controlled by one, one-way switch complete all as specified.

All as per item No. 118 described here - in - before but for 3 pin 5 Amps switch socket combination on independent board using 1.5 Sqmm copper cable

All as per item No. 118 described here - in - before but for 3 pin 5 Amps switch socket combination on same board with other switches using 1.5 Sqmm copper cable

All as per item No 118 but with PVC conduit and conduit accessories for fixing in surfaces of wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell etc.

All as per item No. 118 here-in-before but for One 3 pin 5 Amps switch socket combination on independent board with cables 1.5 Sqmm size.

All as per item No. 118 here-in-before but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per item No 118 but drawn through existing PVC conduit and making good disturbed surfaces of wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for light/ fan/ Bell etc.

All as per item No. 118 here-in-before but for One 3 pin 5 Amps switch socket combination, independent board with cables 1.5 Sqmm size.

All as per item No. 118 here-in-before but for One 3 pin 5 Amps switch socket combination on the same board with other switches, with cables 1.5 Sqmm size.

All as per Item No. 118 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable and 2.5 Sqmm FRLSH copper earth wire cable drawn through PVC conduit including provision of conduit and conduit accessories on surface for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

All as per Item No. 118 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable concealed and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable drawn through 20 mm dia PVC conduit including provision of conduit and conduit accessories for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

All as per Item No. 118 above, but using 2.5 sqmm FRLSH single core multi stranded copper conductor cable existing conduit and make good disturbed surfaces and 2.5 Sqmm FRLSH copper earth wire cable for One 5 pin, 15 Amps Multi purpose switch socket combination on independent board.

Material and labour sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 4 Sq mm FRLSH multi stranded copper conductor drawn through and incl 25 mm dia non metallic PVC rigid conduit and conduit accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 4 sqmm FRLSH copper wire earth continuity conductor including taking down existing sub main wiring complete all as specified and directed by Engr-in-Charge. Note : Three runs of 4 sqmm cable with one run of PVC conduit shall be measured as one run.

Supply and Fix in repairs Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark complete all as specified and directed.

Supply & Fix in repairs Switch socket outlet, multipurpose, flush type, 3/5 Pin,AC, 230 Volts, 5 Amps complete all as specified and directed.

Supply & Fix in repairs switch socket outlet, multipurpose, flush type, 5 in 1, 5/16Amps, AC, 230 Volts, complete all as specified and directed.

Supply and fixing in repairs Bell push, AC, 230 V flush type single pole, complete all as specified and directed.

Supply and Fix in repairs DING DONG bell AC 240 V single pole 50 Hz and connecting up complete all as specified and directed.

Supply and fixing in repairs electronic type fan regulator step type complete all as specified and directed.

Supply and Fix in repairs Ceiling rose 3 terminals, surface Bakelite 65 x 50mm complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures for DBs single pole 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed.

Supply and Fix in repairs Sheet metal enclosures, double door, MCCB incomer DB, 4 way, VTPN, AC 415 Volts complete all as specified and directed.

Supply and Fix in repairs MCCB TP, AC 415 Volts,100 Amps, 16 KA complete all as specified and directed.

Supply and Fix in repairs MCB FP, AC 415 Volts 40/63 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB DP, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SP 240 V, 6A to 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and fixing in repairs wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements with 02 nos PVC block and connection from ceiling rose to fitting complete all as specified and as directed.

Supply and fix in repairs LED energy saving surface mounted decorative oval bulk head light comprising of high brightness 10W, 6000K LEDs complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including 02 Nos PVC blocks complete all as specified and as directed.

Supply and fix in repairs LED square light luminaries fitting surface mounted type 18 W LED 1 ft x 1 ft complete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED Security light fitting 25 W LED (1800 Lumen) complete with all accessories internally pre wired and connecting up with twin / three core flexible copper conductor cable of suitable size from ceiling rose to fitting etc, including necessary bracket complete all as specified and as directed.

Supply and Fix in repairs batten holder (angle / straight), two pin type suitable for self ballast LED lamps screwed with round block including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fix in repairs LED inverter T-LED bulb 20 W, 2 pin, B 22 type Cool daylight, 8hrs charging time, 4hrs back-up time complete all specified and as directed.

Supply and fixing in repairs Recess mounted flat panel 36 Watt LED fitting 2x2 feet in white powder coated CRCA housing with full window acrylic diffuser & electronic driver, high brightness LEDs with all accessories internally prewired and necessary mounting arrangements complete all specified and as directed.

Supply and fixing Surface/Suspended mounting flat panel 36 Watt LED fitting 2x2 feet in white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs with all accessories internally prewired and necessary mounting arrangements complete all specified and as directed.

Supply and fix in repairs LED 1x4 feet, 36 Watt, Surface/ suspended mounted light fitting new generation, aesthetically designed, ultra modern with high transmitive diffuser suitable for indoor spaces complete all as specified and directed.

Supply and fixing in repairs recess mounted round flat panel 12 Watt (6 inch) LED fitting with Al die-cast body, finished with drop down diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, internally prewired and necessary mounting/ fixing arrangement complete all as specified and directed.

Supply and fixing in repairs recess mounting round flat panel 12 Watt (8 inch) LED fitting with Al die-cast body, finish with drop down diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, with all accessories internally prewired and necessary mounting/ fixing arrangements, complete all as specified and directed.

Supply and fix in replacement LED light fitting 2x 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. with all accessories prewired and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing modular switch 1 way 6 amps one module complete all as specified and as directed.

Supply and Fixing modular switch 1 way 16 amps one module complete all as specified and as directed.

Supply and fixing modular socket 6A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fixing modular socket 6A/16A ,2/3 pin combined 2 module complete all as specified and as directed.

Supply and fix in repairs modular electronic fan regulator 120W-2 module complete all as specified and as directed.

Supply and fix in repairs Flame retardant material plastic surface box 2 module with front plate for housing switch/ socket complete all specified and as directed. Make :HAVELLS/ INDOASIAN/ANCHOR or equivalent.

Supply and fix in repairs Flame retardant material plastic surface box 3 module with front plate for housing switch/ socket complete all specified and as directed. Make :HAVELLS/ INDOASIAN/ANCHOR or equivalent.

Supply and fixing in repairs Main motor suitable for Desert cooler complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Fan blade suitable for Desert cooler complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Start and run capacitor suitable for Desert cooler complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Submersible pump 15 W 720 Ltr/Hr Model HG380, suitable for Desert cooler complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs Cooling pad suitable for Symphony Jumbo-70 Desert cooler complete all as specified and directed by Engr-in-Charge.

VVM CONSTRUCTIONS (BID ID -3344415)

Vinayaga constructions (BID ID -3344844)

M/S POTHIRAJ AND CO (BID ID -3343533)

SIVA MARUTHI ENTERPRISES (BID ID -3344897)

m/s m valasubramanian (BID ID -3345038)