Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 CrAdmitted-Finance PLOT NO 5 SATHYAM GARDEN UYIRIYAL POONGA ROAD GORIMEDU SALEM 636 008 | SALEM | SALEM | TAMIL NADU | 636008 | ₹5.9 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RAJ ENGINEERING CONTRACTOR L1 |
|---|---|---|---|---|
| 1.00 | Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete. | 4,700 | m2 | 5 ₹23,500 Lowest |
| 2.00 | Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard Gravelly Soil | 1,337 | m3 | 200 ₹2,67,400 Lowest |
| 3.00 | Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SDR not requring blasting | 669 | m3 | 400 ₹2,67,600 Lowest |
| 4.00 | Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders MR and DMR not requring blasting | 669 | m3 | 400 ₹2,67,600 Lowest |
| 5.00 | Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard rock requring blasting | 1,337 | m3 | 1,000 ₹13,37,000 Lowest |
| 6.00 | Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard rock wedging and chesseling | 445 | m3 | 2,000 ₹8,90,000 Lowest |
| 7.00 | Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B) ordinary soil (for road work) | 80 | m3 | 200 ₹16,000 Lowest |
| 8.00 | Dismantling of PCC clearing away from the site, including,T&P, lead, lift charges and etc., complete | 114 | m3 | 500 ₹57,000 Lowest |
| 9.00 | Dismantling of Brick work clearing away from the site, including,T&P, lead, lift charges and etc., complete | 14 | m3 | 250 ₹3,500 Lowest |
| 10.00 | Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.5m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labour lead lift etc complete. | 500 | Nos | 500 ₹2,50,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹4.1 L
Closing Date
8 Sept 2022, 2:30 pmClosed
CE/TP-I/CHN
O/o the Chief Engineer/Transmission Projects I / Chennai, 3rd Floor , 110 KV GIS Substation building A-10, Guindy Industrial Estate, Guindy, Chennai -32
Providing AH,VC towers , Structure plinths , Addl Compound wall, Cable duct, Pipe line , Metal Spreading, Gravel filling, RCC road for 2 Nos. 230 KV Bay at proposed Nallur 230 / 110 KV SS
2022_EB_248851_1
TP1-086/2022-23
Open Tender
Civil Works
Works
120 days
NALLUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹4.1 L
Yes
7 Oct 2022
26 Aug 2022
9 Sept 2022
26 Aug 2022
8 Sept 2022
26 Aug 2022
Amount
Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.
Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard Gravelly Soil
Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SDR not requring blasting
Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders MR and DMR not requring blasting
Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard rock requring blasting
Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders Hard rock wedging and chesseling
Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth (SS20B) ordinary soil (for road work)
Dismantling of PCC clearing away from the site, including,T&P, lead, lift charges and etc., complete
Dismantling of Brick work clearing away from the site, including,T&P, lead, lift charges and etc., complete
Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.5m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labour lead lift etc complete.
Laying PCC 1:3:6 mix using 20mm HBG machine crushed metal for foundation matt concrete without form work including cost of all labour,materials ,lead ,lift ,curing etc.complete
Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
Laying PCC 1:2:4 mix using 20mm HBG machine crushed metal for foundation matt concrete without form work,including cost of all labour,materials ,lead ,lift ,curing etc.complete Below GL
Laying PCC 1:2:4 mix using 20mm HBG machine crushed metal for foundation matt concrete with form work, including cost of all labour,materials ,lead ,lift ,curing etc.complete ABOVE GL
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for plinth and other works without formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement.
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Footing with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for for Coloumn with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Wall with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Culvert Duct Slab with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.
RCC 1:1.5:3, using 12 to 20 mm HBG machine crushed metal for Cover slab with formwork including cost of cement and all lead, lift , curing etc., complete but excluding cost of steel reinforcement. (By using mixer machine and vibrators) and as directed by the Engineer-in-charge at site.
RCC1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.
Providing concrete road with R.C.C 1:1.5:3 , 150 mm thick over M10 grade concrete 100 mm thick using 12 to 20 mm metal including cost of materials leads and lifts etc.complete.
Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.
Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting , bending , tying and fixing in position as per specification including cost of all materials ,lead ,lift ,labour ,cost of binding wire etc.comlete and as directed by the Engineer-in-charge at site.
Re- Filling in foundation and basement with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification
Transporting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc. complete
RR masonry in CM 1:5 mix, using good quality stone for foundation and basement including cost of all materials, lead, lift and curing etc., complete and as directed by the Engineer-in-charge at site.
Fly Ash Brickwork in cm 1:4, using good quality Fly Ash brick of size 23x11x7 cm including cost of all materials labour, lead, lift, curing and Transporting charges etc complete and as directed by the Engineer-in-charge at site.
Plastering with CM 1:3, mix 12mm thick for inside and outside walls including all cost labour materials lead lift etc complete and as directed by the Engineer-in-charge at site.
Raised pointing with CM 1:3, for RR walls including cost of cement, all materials, labour, lead, lift and curing etc., complete and as directed by the Engineer-in-charge at site.
Colour washing 2 Coats over a base coat of primer using Exterior weather coat using Asian APEX or Equivalent of approved Brand, quality and colour for outer surfaces including cost of all labours to work at all levels cost of materials brushes, scaffolding charges etc. complete complying with standard specification and and as directed by the Engineer-in-charge at site.
Fabriaction, galvanising and supply of foundation bolts of 20,25 mm various sizes and nuts with washer in Galvanized Steel including threading with nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site
Fabriaction, galvanising and supply of foundation bolts of 32,56 mm various sizes and nuts with washer in Galvanized Steel including threading with nuts and washers at top including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site
Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site
Assembling of AH,WC type tower template with Bolt & Nuts to correct level and alignment including shifting of template from Location to location and reassemblilng etc including cost of all labour, lead ,lift, bolt nut, washers Gasset plates etc, complete.
Erection of various tower parts vertical columns , booms etc as per drawing including sorting out at site , erection, tightening , punching , final checking, providing holes wherever necessary and final checking etc., complete including cost of all labour charges etc., complete.
Supplying and fixing of 5.00m wide gate and 1.00 Mtr. Wide wicket gate including cost of all materials lead and lift etc., complete including painting with two coats enamel paint over one coat of red oxide.
Supplying and fixing of MS angles for fence post of required height as directed by engineer incharge at site including cost of materials, lead, lift painting two coats of enamel paint over one coat of primer, fabrication charges, etc, complete
Supply and fixing of G I .barbed wire of 12 gauge, 2 ply with 4 pointed 75mm a post confirming to IS278 /1982 and laying, tensioning 8 rows in horizontally for one span of 4 m interval as per drawing includingcost of all materials ,labour charges for tying ,cost of binding wire, hire charges for T&P, lead ,lift, etc complete, and as per instruction of Engineer at site.
Providing PVC pipes for Veep holes for Walls with 110 mm dia PVC pipe 4 kg/cm2 including cost of all material, lead, lift, etc., complete as per standard specification and as directed by the Engineer-in-charge at site.
Transporting and fixing of RCC cover slab from curing tank to working spot including cost of labour, lead, lift etc., complete.
Supplying and fixing readymade earth collars of size 60 cm inner dia with 30 cm height and shell thickness of 50 mm including cost of all materials,transport to site , labour, lead, lift, etc., complete., as per standard specification.
Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete.
Supplying and fixing of 110 mm dia PVC pipe with 6kg/sq.cm including all cost of materails lead lift etc complete.
Providing pvc pipes including specious – 40 MM dia including cost of all materials, etc., complete.
Providing PVC pipes including specious – 32 MM dia including cost of all materials, etc., complete.
Providing PVC pipes including specious – 25 MM dia including cost of all materials, etc., complete.
Providing pvc pipes including specious – 20 MM dia including cost of all materials, etc., complete.
Providing and fixing wheel valve of various diameter of Gun metal made including cost of all mateials, labour, lead, lift etc., complete.40 mm Dia Wheel Valve(GM)
Providing and fixing wheel valve of various diameter of Gun metal made including cost of all mateials, labour, lead, lift etc., complete. 32 mm Dia Wheel Valve(GM)
Supplying and filling the trench with filling sand along the cable route as per standard specification,including cost of all materials,labour,lead,lift etc, complete.
Supplying and spreading of stone dust -5 CM including cost of all materials , lead , lift watering and levelling the surface etc., complete
Supplying and spreading of metal jelly of size 20 mm thickness of 15 cm over stone dust including cost of all materials , lead , lift watering and levelling the surface etc., complete
Supplying, fabricating in GI angle / flats including cost of GI angle ,Flats ,Anhor bolt as per drawing and specification and galvanising , placing in position , including cost of all materials, galvanizing charges , transportation, labour, lead, lift etc complete as directed by the dept. Engr at site
Wiring with 2x1.5 sq.mm PVC insulated single core unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)
Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.
wiring with 2 x 4 sqmm (56x0.3) PVC insulated single core unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x63 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point
Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only.
Supply and fixing of 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).
Supplying and fixing 40 W decorative Doom CFL bulb with fitting complete of ISI make including cost of all materials, labour charges all leads, lifts, etc., as per standard Specification complete.
Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.
Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete
Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete
Supplying, Transportation, fabrication, galvanising of standard towers parts as per department approved drawing including of tower parts to site, all taxes and duties, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer.
Supplying, Transportation, fabrication, galvanising of standard Bolts and nuts as per department approved drawing including of tower parts to site, all taxes and duties, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer
GST for bidders within TamilNadu
GST for bidders outside TamilNadu (IGST)
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .