REPAIR TO FLOORING PLASTERING TILING PLINTH PROTECTION PATH ETC AT NORTH SOUTH AND MUTAGA CAMP AT ATS BELGAVI

Amount

Taking down cement plaster on brick or stone walls, celing etc incl raking out joints hacking for key, scrubbing down with water etc complete including removing rubbish off the premises.

M & L rendering 15mm thick on fair faces of brick masonry or concrete wall surfaces in cement mortar 1:4 finished even and smooth without using extra cement.

M & L rendering 10mm thick on fair faces of brick masonry or concrete wall surfaces in cement mortar 1:6 finished even and smooth without using extra cement.

M & L rendering 5mm thick on concrete ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement.

M & L for preparation of new plastered ceiling surfces and applying three coats of white wash all as specified and as directed.

M & L for Two coats of Acrylic distemper over a coat of primer on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces all as specified and as directed. Note: The colour shade shall be as approved by GE

M & L for two coats of Cement base paint over a coat of self primer on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces all as specified and as directed. Note: The colour shade shall be as approved by GE

M & L for preparation of old treated wall surfces and applying one coat of white wash all as specified and as directed.

M & L for preparation of old treated wall surfces and applying one coat of oil bound distemper all as specified and as directed.

Demolition of dressed stonework, pre-cast concrete articles and precast concrete block walling built in cement mortar including all quoins, arches, pillars, etc., complete all as specified and as directed.

M & L for PCC solid block masonry 1:3:6 type C1 using 20mm graded stone aggregate exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including necessary formwork weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

M & L PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in 25mm thick levelling course to lay tile flooring complete all as specified and as directed

M & L Non skid, coloured tiles superior finish grade B-1, coloured ceramic tile 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L Non skid, coloured tiles superior finish grade B-1, coloured ceramic tile 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L Non skid, coloured tiles superior finish grade B-1, coloured ceramic tile 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in risers to steps/ skirting/ dado including 10mm thick backing coat in cement mortar 1:4 all as specified and as directed.

M & L Non skid, coloured tiles superior finish grade B-1, coloured ceramic tile 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in floors including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L Non skid, coloured tiles superior finish grade B-1, coloured ceramic tile 7 to 8mm thick (square or rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, as in riser to steps/ skirting/ dado including 10mm thick backing coat in cement mortar 1:4 all as specified and as directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, Dark shade, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, light shade, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, light shade, in skirting/dado/ riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 all as specified and as directed.

M & L Glazed ceramic tiles, coloured, 300mm x 200mm size, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, on vertical surfaces such as dado/ skirting, etc. including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 450X350X7mm thick with rectified edges, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick cement mortar 1:4 backing coat complete all as specified and as directed.

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in 40mm thick flooring ncluding finishing the surface even and smooth without using extra cement complete all as specified and as directed

M & L PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in 75 mm thick plinth protection including finishing the surface even and fair without using extra cement complete all as specified and as directed.

M & L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in 75mm thick paving ncluding making expanded metal impression or spike rolling complete all as specified and as directed

S & F for glass dividing strips, 38mm wide and 3mm thick, inserted in position all as specified and as directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and as directed. .

M & L Machine cut Kota stone slab 20-25 mm thick in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete all as directed including 20mm thick screed bed in cement mortar 1:6, all as specified and as directed.

M & L Machine cut Kota stone slab 20-25 mm thick in skirting, jointed with grey cement slurry mixed with pigment to match the shade of tile including rubbing and polishing complete all as directed including 15mm thick backing coat in cement mortar 1:4, all as specified and as directed.

M & L for 20mm thick granite tiles (any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing and 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for 20mm thick granite tiles (any type) machine cut, in skirting / dado with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, polishing and 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L Machine cut cudappah stone slab 20-25mm thick over cement screed base for kitchen platforms, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:4 and drilling holes for gas pipe etc., all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations

M & L pre-cast cement concrete rubber moulded designer tiles of size 300mmx300mm, 25mm thick set and jointed in neat cement slurry, pointed with white cement mixed with pigment to match the shade including 20mm thick screed bed in CM 1:6 of the complete all as specified and as directed. .

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in 75 mm thick sub base to flooring complete all as specified and as directed.

Supplying only river sand for cushioning all as specified and as directed. .

M & L Machine pressed precast concrete interlocking paver block any shape and size With grey cement and pigments confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over sand cushion all as specified and as directed. Note : Supply of sand will be measured & paid seperately

Grinding / rubbing of existing terrazo / kota stone flooring minimum three times as required to achieve desired finish including waxing complete all as specified and as directed.

M & L two layers of CRACK X-PASTE filling compound on internal/external faces as in wall and ceiling for filling in cracks (size of filling shall not be more than 5mm wide and 5mm deep) all as specified and as directed.

M &L for applying two coats of water proofing coating system by applying shalicryl-215 of STP Ltd/Rain coat 601 of DR fixit /Barrier coat of Araldite over a coat of respective primer including preparation of plaster surface by complete removal of existing treatment including filling of crack with respective crack filler all as per manufacturers instructions all as directed .

Removal of concrete and plaster debris to a distance 1.5km but not exceeding 5 km and depositing where directed, complete all as specified.

Dismantling wall/ceiling boards (fibre pulp,insulation etc) or insulation boards/slab/blanket any thickness including cover fillets all as specified and as directed.

Supplying and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre all as specified and as directed.

M & L preparation of new ceiling surface and applying two coats of plastic emulsion paint over a coat of self primer all as specified and as directed.

M & LHangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Taking down wooden /PVC chowkats with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each including making good disturbed surfaces to match with adjoining surfaces all as specified and as directed.

M & L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in cement mortar 1:4 and drilling holes for gas pipe etc., all as specified and as directed..

M & L Aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

M & L Aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified

M & L Aluminium powder coated (minimum thickness of powder coating 50 micron) fancy deco grill 5mm thick complete all as specified & directed

M & L Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed

M/S ADITYA CONSTRUCTIONS

RAJENDRA KRISHNA SARAF

M/s. N D KALING

RAHUL SAYAJIRAO DESAI

M/s PRATAP VIJAYSINGHRAO DESAI

PURVIK CONSTRUCTIONS

Raghu M Contractor

LAKSHMI DEVELOPERS

M/S MAHADEV M PATIL