Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC 48 CHANDAK LAYOUT GHAT ROAD NAGPUR | NAGPUR | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹14.4 L+₹88,555 (6.53%)Rejected-AOC | L2 | Rejected-AOC BEING L3 | |
| 3 | L3₹20.0 L+₹6.4 L (47.5%)Rejected-AOC | L3 | Rejected-AOC BEING L2 |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
30 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR TO JOINERY IN CERTAIN BUILDINGS IN ZONE B AREA AT VSN, NAGPUR
2022_MES_549298_1
GE/NAG/22-23/8557/28
Open Tender
Miscellaneous Works
Item Rate
180 days
GE AF NAGPUR
As per NIT
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹30,000
29 Nov 2022
2 Sept 2022
7 Oct 2022
2 Sept 2022
30 Sept 2022
16 Sept 2022
Amount
Taking down of chowkhat with shutter without taking off shutter from the frame exc 1.5 Sqm each but not exc 4 Sqm all as specified and as directed
Taking down of shutters of any description not exc 1 Sqm each all as specified and as directed
Taking down of chowkhat with shutter without taking off shutter from the frame not exc 1.5 Sqm each all as specified and as directed
Taking down of shutters of any description exc 1 Sqm each and not exc 2 Sqm each all as specified and as directed
S & F IInd class HW plain solid straight chowkhat and frame framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rein forced with mild steel squartube with single side prelaminated PVC sheet used instead of plain colour PVC sheet and edge will be painted to match with prelaminated sheet and fixed in position as per manufacturers instruction all as specified and directed.
S&F Factory made solid PVC moulded door shutter 30 mm thick (Stiles) consisting of frame made out of M. S. tubes for top and bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail . Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing inthe frame at site as per specification & drawing complete all as specified and directed
S&F Factory made solid PVC moulded Door shutters 28 to 30 mm thick (stile), with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board coare supplying & fixing in frame at site as per specification & drawing on Sl page No 161 of SSR Part - II 2020 complete all as specified and directed
S& F Factory made solid panel PVC door wired gauzed shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panneling of stainless steel wire cloth i.e. panel will be of wire gauze in lieu of PVC sheet panel . The wire gauze shall be wrapped on an additional square 8 mm M.S. Solid tube and this tube shall be wellded to MS tubes. The wire gauze shall be stretched to tighten firmly complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle steel peg stay complete with glazing bars dovetailed or welded including taking down old one all as specified and as directed
S&F steel ventilators with centre hung shutters including two pairs of brass cup pivots catch spring and pulling wheel complete including taking down old one all as specified and as directed
S &F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed
S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepare to received glass gauze etc divided into square with plain, chamfered or rounded mitred and rebated sash bars any numbers edge of framing plain, chamfered complete all as specified and directed
S & F 30 mm thick second class hard wood plain framed pannelled shutters(any number of pannel), with pannels of veneered particle board or ply wood or bison board complete all as specified and directed
S&F 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides make as approved by GE complete all as specified and directed
S & F in repair 12 mm thick plywood grade BWR type BB fixed with screws to timber frame work in partitions and fixed in repairs complete all as specified and directed
S & F 18/19mm thick Block board, grade 1 quality, exterior grade, comercial type with one side decorative face complete all as specified and directed
S & F mild steel flat iron hold fast including bolts conforming to Fe-290 Gde-E-165 all as specified and as directed
M & L for providing plain cement concrete 1:3:6 type C1 using 20 mm graded aggregate for fixing hold fast and making good to disturubed surface all as specified and as directed
Hacking out old broken glasses any thickness size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed
All as per item No 20 above but from metal frame including punching out or drilling out glazing pins / spring clips and providing and fixing new all as specified and as directed
S&F sheet glass ordinary quality 3 mm thick with oil putty exc 0.5 sqm in each pans all as specified and as directed
All as per item No 22 above but pin head type complete all as specified and directed
S&F sheet glass ordinary quality 4.8 mm thick with oil putty exceeding 0.5 Sqm in eachpane all as specified and as directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples all as specified and as directed
All as per item No 25 above but fixed in repair to steel/wooden shutters complete all as specified and directed
S&F but hinge, medium weight cold rolled mild steel 100 mm long all as specified and as directed
S&F but hinge, medium weight cold rolled mild steel 75 mm long all as specified and as directed
S & F in repairs continuos (Piano) hinge MS bright finished or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed
S & F aluminium anodised sliding door bolt with hasp staples (Bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy 300 mm long and fixed all as specified and directed
S & F Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed
S & F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed
All as per item No 32 above but 150 mm long complete all as specified and directed
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long complete all as specified and directed
All as per item No 34 but 100 mm long complete all as specified and directed
S & F Hasp and staple 125mm long , mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and as directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparing new surface of wood of any description over 10 Cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed
All as per item No 39 but on steel surfaces over red oxide primer complete all as specified and directed
M&L for preparing old surface of wood of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed
All as per item No 41 but on steel surfaces complete all as specified and directed
S & F in repair 300 mm long mild steel ordinary rat rail spring including roller and roller plate complete and taking down old one all as specified and as directed
S & F in repair Harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. etc complete all as specified and directed
S &F in mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed
S & F mild steel peg stay for windows/ventilators all as specified and as directed
M & L for welding in repairs n.exc 2.5 cm in length n exc 6 mm thick complete all as specified and directed
M & L for welding in repairs to broken hinges of door and windows to metal frame all as specified and as directed
S &F in repair aluminium anodized tubular towel rail 20 mm dia D type 60 cm long between flanges fixed in repairs complete all as specified and directed
S & F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed
S &F 5mm PVC rubber sheet for doors complete all as specified and as directed
S&F in repair stainless steel wall mounted rack of size 630 x700 x220 mm and thickness of sheet not less than 0.05mm with provn for keeping plates and other crockery fixed with screw and rawal plug etc on wall complete all as specified and as directed.
S&F in repair to 9 feet pully operated cloth drying system aluminium anodised 20mm dia pipes, channels assembly , locking system to hide rope knot, rope 4 mm dia HDPE double core and fitting materials etc. complete all as specified and directed. Make:- Easy dry or other equivalent make as approved by GE.
M/s ABHIMAN HEGDE
M/s S. S. MUNDE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .