REP TO MES INSTALLATIONS, OVER HEAD RESERVOIRS AND FENCING AROUND MES INSTALLATION UNDER GE(N) AHMEDNAGAR

Amount

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

M & L in repairs for 4 mm thick aliuminium composite panel cladding work of blue colour including necessary bracing for fixing to frame work or wall surface etc by means of revetting etc complete all as specified and directed by Engineer-in-charge.

S & F in repairs 12" stainless steel alphabets polished fixed to ACP sheet/ cladding work/ metal frame work etc complete all as specified and directed by Engineer-in-charge.

Material & Labour for providing retroreflective self adhesive alphabets, Numbers, Logo etc of size 50mm on ACP sheet signboard, complete all as specified and directed by Engineer-in-charge.

Material & Labour for providing retroreflective self adhesive alphabets, Numbers, Logo etc of size 51-100mm on ACP sheet signboard, complete all as specified and directed by Engineer-in-charge.

M&L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and directed by Engineer-in-charge.

M&L mild steel framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Demolition of brick work or stone/ boulder masonry/PCC block, built in cement mortar or cement lime mortar including all quoins, pillars etc.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

Taking down cement plaster on brick or concrete surfaces on wall/ceilling/stone/block etc including racking out joint, hacking for key,scrubbing down with water etc all as specified and as directed

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement

M&L for rendering 15 mm thick in CM 1:6 over brick surfaces, finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 on ceillng, finished even and smooth all as specified and as directed.

M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls.

M & L applying two coats of OBD over a coat of primer on newly plastered wall surfaces over 3mm thick wall care putty on wall, preparation of surfaces all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls over 3mm thick wall care putty on wall including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint including scafolding at any height complete all as specified and directed by Enggineer-in-charge..

M&L for preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls including scafolding at any height complete all as specified and directed by Enggineer-in-charge.

Demolition floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removal of debries to a distance not exceeding 100m all as specified and as directed.

S/F Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, of size 600x600, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 .

S/F vitrified ceramic tiles 8 to 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36sqm,in vertical surfaces such as skitings, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

S&F Non-skid Coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) size of each tiles 400x400 mm in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6

M&L for Glazed ceramic coloured tiles in vertical surface 350*250*7 /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in backing of skirting and dado including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall as in backing of skirting and dado all as specified and as directed.

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm all as specified and as directed.

Taking down of shutters of any description exceeding 1 sqm each and not exceeding 2 sqm each all as specified and as directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board coare supplying & fixing in frame at site as per specification & drawing on sl. page no. 161 of SSR part II 2010

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

Ditto all as per item No 29 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

S&F sheet glass ordinary quality 3 mm thick with oil putty not exceeding 0.5 sqm in each pane all as specified and as directed.

Ditto all as per item No 31 above but pin head type

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.

S&Fin repair aluminium anodised barred tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long

S & F in repair vitreous china wash basin, white back, size 500 X 400 mm x 190 mm , errecting on existing CI brackets including taking down old one alll as specified and as directed . Note: If the mentioned size is not available in the market , the next immediate higher size shall be provided by the contractor . Make of parryware Code :Flair C0476 or others equvelent in jaquar and Hindware

S&F 10 in repair litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and taking down old one complete all as specified and as directed

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F 15mm dia Chromium plated fancy type Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed . Make of essco Code :ORB-105037 or others equvelent in parryware and Hindware

Taking down carefully existing bituminous felt including plastered lime or cement concrete of any thickness and cleaning of the surface of roof trenches including flushing and junction parapets kerb walls PCC fillets benching etc with wire brushes and removing of the rubbish to a distance not exc 500mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified.

M&L Water proofing treatment to RCC roof slab and shall be carried out as specified below all as specified and directed :- (a) M&L for 10mm thick screed bed in CM 1:3 on concrete surfaces of roof slab and parapets finished even and smooth without using extra cement (b) The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projection washed dried up and cleaned of all foreign matter and dust to receive primer. (c) M&L Applying bituminous primer on cleaned surface @ 0.40 Lit/sqm. (d) M&L Providing APP polymer modified approved membrane 3mm thick, non woven, polyster,weighing not less than 3.6 Kg/Sqm and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and applied completely by torch application method, the overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise; all as specified & directed. (e) M&L Carrying out test by flooding water for 24 hrs for leakages & seepages and rectifying the leakages / seepages / defects, if any, to the entire satisfaction of GE. (f) M&L finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 liter/Sqm on the top of membrane surfaces complete all as specified & directed. (g) The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer. (h) Note:- The contractor shall furnish the following before and during progress of water proofing work:- (i) Quality confirmation from the manufacturer of the product alongwith quantity supplied. (ii) Manufacturer test certificate. (iii) The result, if tested in any of the independent laboratory or testing if ordered by GE, the testing charges shall however shall be borne by the contractor.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge

Dismantling fencing wire mesh, any type complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft and loose soil returning,filling in and ramming earth or broken rubble mixed with earth around, removing surplus material n.exc 50 mtr and making good distrubed surface etc complete all as specified and directed by Engineer-in-Charge

Material and labour for plain cement concrete in PCC 1:4:8 type D2 using 40 mm graded aggregates in foundation filling and mass concrete or similar work etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild steel angle iron for posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Mild steel bolts 10mm dia and 65 mm long purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut etc complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link fencing made cut from GI wire 10 gauge and 50 mm apperture weight not less than 3 kg / Sqm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 10 mm dia mild steel round bars to tighten chain link fencing including necessary hooking binding cutting etc complete all as specified and directed by Engineer-in-Charge

Material and labour for flat iron 40 x 6 mm cut to required length including drilling holes for fixing of nut and bolts to hold chain link fencing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of acid resistant paint over a coat of red oxide primer for new / old steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

Material and labour for round bars 8 to10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engineer-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slab and tiles of any description or thickness laid bedded & pointed in cement mortar in floors, aprons etc. complete all as specified and directed by Engineer-in-Charge

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base for floor, plinth protection and path, complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed.

M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete aver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for factory made kerb stone of M-25 grade cement concrete fixed in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening arrngment wherever required complete as directed.

M&L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high, complete all as specified and directed.

M/S. M. F. Sharif & Co.

M/S-B.R.SONAWANE

M/s Mauli Construction

M/S VISHWAJEET SHANKARRAO KULKARNI

M/s. R. R. ASSOCIATES

Vinod Enterprises

MS. G.A. CONSTRUCTION