REPAIR TO LEAKAGE/SEEPAGE AND OTHER RELATED B/R WORKS IN ZONE-I UNDER AGE B/R-III OF GE (SOUTH) MEERUT CANTT.

Amount

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed.

Taking down old existing water proofing treament from the top of RCC/arch slab, including taking down existing PCC padding or plaster, Brick Bats/Mud and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed.

Material and labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in padding or roof finished even and fair without using extra cement complete all as specified and directed.

Material and labour for cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match including necessary formwork. Complete all as specified and directed.

Material and labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30 kg/sqm followed evenly by a tack coat @ 1.20kg/sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane weight 3.6 kg/sqm reinforced with non-woven polyster fabric (weight not less than 160 gm/sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufcturers instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20kg/sqm and finally finished the top of polymeric water proofing membrane with a coat of bitumen aluminium paint @ 0.20kg/sqm as per manufacturers instructions complete all as specified and directed.

Material and labour for 20mm thick cement plaster in CM 1:4 on roof surfaces with water proofing compound. Complete all as specified and dirtected. Note- water proofing compound shall be paid separately.

Supply only integral water proofing compound Doctor fixit complete all as specified and directed.

Disconnecting existing tanks, not exc 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water and bringing the tank to a position for storing the clean water. Complete all as specified and as directed .all as specified and directed. Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Disconnecting existing tanks, not exc1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position and incl Cleaning and removing all scale and dirt etc: from the tanks and from mouth of circulating pipes etc complete and finally washing the tanks with clean water and bringing the tank to a position for storing clean water. Complete all as specified and as directed. Note: (i) The tank is to be cleaned through Alum and bleaching powder solution. (ii) The wire brush is to be used for cleaning of water tank.

Dismantling of water and removing to store capacity 500 litres and supply and fixing 500 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 20 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store and S & F 15 mm dia GI tubing medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

Taking down PVC/CI pipes any type and size incl all fittings complete all as specified and directed.

Supply and fix for PVC (SWR) pipes 75mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix for PVC (SWR) pipes 110mm bore double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix for PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

Supply and fix for PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

Supply and fix for PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia complete all as specified and directed.

Supply and fix for PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia complete all as specified and directed.

Supply and fix for stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified and directed.

Supply and fix for stack clamps out of 25mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick Work or concrete curface and finished fair & even in CM 1:6 complete all as specified and as directed.

Material and labour for preperation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer. Complete all as specified and directed

Supply and fix in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (minimum weight -210 gms) complete all as specified and directed.

Material and labour for 100mm thick cement concrete type B-1 1:2:4 (using 20mm graded agg) as in tank plateform on roof complete all as specified and directed.

Demolition of existing door/window/ventilator/roof RCC projection/chajja and S&F 2mm thick fibre glass reinforced translucent plain sheet incl frame of angle iron 40x40x5mm thick and flat iron 40x3mm. Incl fixing on wall complete all as specified and directed.

Supply and fix in repair PVC covers of PVC/ HDPE water tank suitable for 500 & 1000 ltrs capacity including all necessary locking arrangement complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifed and incl dismantling of old sheet complete all as specified and directed.

Supply and fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifed and incl dismantling of old sheet complete all as specified and directed.

Material and labor for 6mm thick asbestos cement, corrugated or semi-corrugated sheet in roofs, wall etc fixed with L-type or J-type cranked hook bolts incl dismantling of old sheet complete all as specified and directed.

Dismantling timber scantiling 40 Sqcm and over in section in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for comlete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

Supply and fixing for anodised aluminium snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40 x 25 x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weith not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed by Engr-in-charge.

Material and labour for 4 mm thick armstrong ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified and directed by Engr-in-charge.

Supply and fix for rolled sections as in main and cross beams, hip and jack rafters, pulins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats to other connecting plates complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class' B' bricks (except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean raidus built in CM 1:6. Complete all as specified and directed.

Jay Ambay Enterprises

Tayal Builders

M/S AMAR ELEKTRO CENTRE

jitendra AND Co

B.K.construction

Shikha Enterprises

M/S ABHI ASSOCIATES

R.D.Builders